这个机顶盒能刷什么？附TTL内容

少年不***

1. 
   
2. Bootrom start
   
3. Boot Media: eMMC
   
4. Decrypt auxiliary code ...OK
   
5. 
   
6. lsadc voltage min: 000001A8, max: 000001B1, aver: 000001AC, index: 00000003
   
7. 
   
8. Enter boot auxiliary code
   
9. 
   
10. Auxiliary code - v1.00
    
11. DDR code - V1.1.2 20160205
    
12. Build: Jul 27 2018 - 00:49:01
    
13. 
    
14. Reg Version:  v1.5.2\
    
15. Reg Time:     2017/12/19 12:02:00
    
16. Reg Name:     hi3798mv3dmm_hi3798mv300_DDR3-1866_1GB_16bitx2_4layers.reg
    
17. 
    
18. Boot auxiliary code success
    
19. Bootrom success
    
20. 
    
21. 
    
22. System startup
    
23. 
    
24. 
    
25. Relocate Boot
    
26. 
    
27. Jump to C code
    
28. 
    
29. 
    
30. Fastboot 3.3.0 (proj-hnX-hncatv__121760@join-r730-00) (Apr 23 2023 - 17:12:40)
    
31. 
    
32. Fastboot:      Version 3.3.0
    
33. Build Date:    Apr 23 2023, 17:13:23
    
34. CPU:           Hi3798Mv300
    
35. Boot Media:    eMMC
    
36. DDR Size:      1GB
    
37. 
    
38. LOGO Flag:e1a00000
    
39. Found flash memory controller hifmc100.
    
40. no found nand device.
    
41. 
    
42. MMC/SD controller initialization.
    
43. scan edges:2 p2f:4 f2p:6
    
44. mix set temp-phase 1
    
45. scan elemnts: startp:81 endp:77
    
46. Tuning SampleClock. mix set phase:[01/07] ele:[09/14]
    
47. MMC/SD Card:
    
48.     MID:         0x45
    
49.     Read Block:  512 Bytes
    
50.     Write Block: 512 Bytes
    
51.     Chip Size:   7636800K Bytes (High Capacity)
    
52.     Name:        "DG4008"
    
53.     Chip Type:   MMC
    
54.     Version:     5.1
    
55.     Speed:       100000000Hz
    
56.     Mode:        HS400
    
57.     Voltage:     1.8V
    
58.     Bus Width:   8bit
    
59.     Boot Addr:   0 Bytes
    
60. Net:   up, down, gmac0
    
61. 
    
62. Boot Env on eMMC
    
63.     Env Offset:          0x00200000
    
64.     Env Size:            0x00010000
    
65.     Env Range:           0x00010000
    
66. 
    
67. 
    
68. SDK Version: gitServer_v2018121410
    
69. 
    
70. Normal logo
    
71. factory_check begin
    
72. chend---ir get:0
    
73. chend---ir get:0
    
74. chend---ir get:0
    
75. chend---ir get:0
    
76. chend---ir get:0
    
77. chend---ir get:0
    
78. chend---ir get:0
    
79. chend---ir get:0
    
80. chend---ir get:0
    
81. chend---ir get:0
    
82. properties buf_length=2000.
    
83. yuancheng flag_stbsn=0,flag_mac=0
    
84. HI_Flash_Open partion factory error
    
85. check remote recovery button begin
    
86. HI_UNF_IR_GetValue failed£¬ret:-1
    
87. hunan_mac=00:69:2D:4E:AD:D5
    
88. hunan_sn=0971080020170005014
    
89. serialno:0971080020170005014
    
90. stbid=DEVINFO!
    
    
91. hunan_mac=00:69:2D:4E:AD:D5
    
92. mac:00:69:2D:4E:AD:D5
    
93. Reserve Memory
    
94.     Start Addr:          0x3FFFE000
    
95.     Bound Addr:          0x8DA4000
    
96.     Free  Addr:          0x3EB88000
    
97.     Alloc Block:  Addr         Size
    
98.                   0x3FBFD000   0x400000
    
99.                   0x3F8FC000   0x300000
    
100.                   0x3F8F9000   0x2000
     
101.                   0x3F8C8000   0x30000
     
102.                   0x3F897000   0x30000
     
103.                   0x3F598000   0x2FE000
     
104.                   0x3EDAD000   0x7EA000
     
105.                   0x3EDA9000   0x3000
     
106.                   0x3EC13000   0x195000
     
107.                   0x3EC09000   0x9000
     
108.                   0x3EB88000   0x80000
     
109. 
     
110. Press Ctrl+C to stop autoboot
     
111. 
     
112. MMC read: dev # 0, block # 159744, count 20480 ... 20480 blocks read: OK
     
113. 
     
114. 159869897 Bytes/s
     
115. 
     
116. Found Initrd at 0x04000000 (Size 351716 Bytes), align at 16384 Bytes
     
117. 
     
118. ## Booting kernel from Legacy Image at 01ffffc0 ...
     
119.    Image Name:   Linux-3.18.24_hi3798mv2x
     
120.    Image Type:   ARM Linux Kernel Image (uncompressed)
     
121.    Data Size:    9098089 Bytes = 8.7 MiB
     
122.    Load Address: 02000000
     
123.    Entry Point:  02000000
     
124.    XIP Kernel Image ... OK
     
125. OK
     
126. ATAGS [0x00000100 - 0x000004F4], 1012Bytes
     
127. 
     
128. Starting kernel ...
     
129. 
     
130. Uncompressing Linux... done, booting the kernel.
     
131. Booting Linux on physical CPU 0x0
     
132. Initializing cgroup subsys cpu
     
133. Initializing cgroup subsys cpuacct
     
134. Linux version 3.18.24_hi3798mv2x (proj-hnX-hncatv__121760@join-r730-00) (gcc version 4.9.4 (gcc-linaro-4.9-2017.01 + glibc-2.27 Build by czyong Thu Mar 29 22:12:18 CST 2018) ) #1 SMP Sun Apr 23 17:10:58 CST 2023
     
135. CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
     
136. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
     
137. initmrd: found no initmrd.
     
138. Machine model: Hisilicon
     
139. cma: Reserved 44 MiB at 0x3bc00000
     
140. cma: Reserved 4 MiB at 0x3fc00000
     
141. Memory policy: Data cache writealloc
     
142. DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
     
143. PERCPU: Embedded 10 pages/cpu @debc1000 s11648 r8192 d21120 u40960
     
144. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261144
     
145. Kernel command line: console=ttyAMA0,115200 blkdevparts=mmcblk0:2M(fastboot),2M(bootargs),16M(recovery),2M(swdevinfo),8M(baseparam),8M(pqparam),8M(logo),32M(fastplay),16M(kernel),2M(misc),40M(trustedcore),8M(securestore),16M(properties),720M(cache),100M(private),100M(otapackage_tmp),824M(system),720M(otapackage),-(userdata) androidboot.serialno=0971080020170005014 initrd=0x4000000,0x55DE4 mem=1G mmz=ddr,0,0,44M
     
146. log_buf_len individual max cpu contribution: 4096 bytes
     
147. log_buf_len total cpu_extra contributions: 12288 bytes
     
148. log_buf_len min size: 16384 bytes
     
149. log_buf_len: 32768 bytes
     
150. early log buf free: 13944(85%)
     
151. PID hash table entries: 2048 (order: 1, 8192 bytes)
     
152. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
     
153. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
     
154. Memory: 957372K/1048576K available (13805K kernel code, 877K rwdata, 4484K rodata, 619K init, 2399K bss, 91204K reserved, 476784K highmem)
     
155. Virtual kernel memory layout:
     
156.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     
157.     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
     
158.     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
     
159.     lowmem  : 0xc0000000 - 0xdf400000   ( 500 MB)
     
160.     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     
161.     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
     
162.       .text : 0xc0008000 - 0xc11e488c   (18291 kB)
     
163.       .init : 0xc11e5000 - 0xc127fd80   ( 620 kB)
     
164.       .data : 0xc1280000 - 0xc135b7cc   ( 878 kB)
     
165.        .bss : 0xc135b7cc - 0xc15b370c   (2400 kB)
     
166. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
     
167. Hierarchical RCU implementation.
     
168. NR_IRQS:352
     
169. Architected cp15 timer(s) running at 24.00MHz (phys).
     
170. sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
     
171. Switching to timer-based delay loop, resolution 41ns
     
172. sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
     
173. Console: colour dummy device 80x30
     
174. Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
     
175. pid_max: default: 32768 minimum: 301
     
176. Security Framework initialized
     
177. SELinux:  Initializing.
     
178. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
     
179. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
     
180. Initializing cgroup subsys perf_event
     
181. CPU: Testing write buffer coherency: ok
     
182. ftrace: allocating 45238 entries in 133 pages
     
183. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
     
184. Setting up static identity map for 0xc83220 - 0xc83278
     
185. CPU: hi3798mv300
     
186. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
     
187. CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
     
188. CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
     
189. Brought up 4 CPUs
     
190. SMP: Total of 4 processors activated (192.00 BogoMIPS).
     
191. CPU: All CPU(s) started in SVC mode.
     
192. VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
     
193. regulator-dummy: no parameters
     
194. NET: Registered protocol family 16
     
195. DMA: preallocated 256 KiB pool for atomic coherent allocations
     
196. hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
     
197. hw-breakpoint: maximum watchpoint size is 8 bytes.
     
198. Serial: AMBA PL011 UART driver
     
199. f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 81, base_baud = 0) is a PL011 rev2
     
200. console [ttyAMA0] enabled
     
201. f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 83, base_baud = 0) is a PL011 rev2
     
202. f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 84, base_baud = 0) is a PL011 rev2
     
203. pl061_gpio gpio0: PL061 GPIO chip @0xf8b20000 registered
     
204. pl061_gpio gpio1: PL061 GPIO chip @0xf8b21000 registered
     
205. pl061_gpio gpio2: PL061 GPIO chip @0xf8b22000 registered
     
206. pl061_gpio gpio3: PL061 GPIO chip @0xf8b23000 registered
     
207. pl061_gpio gpio4: PL061 GPIO chip @0xf8b24000 registered
     
208. pl061_gpio gpio5: PL061 GPIO chip @0xf8004000 registered
     
209. pl061_gpio gpio6: PL061 GPIO chip @0xf8b26000 registered
     
210. pl061_gpio gpio7: PL061 GPIO chip @0xf8b27000 registered
     
211. pl061_gpio gpio8: PL061 GPIO chip @0xf8b28000 registered
     
212. pl061_gpio gpio9: PL061 GPIO chip @0xf8b29000 registered
     
213. hisilicon-pcie: probe of f0001000.pcie failed with error -1
     
214. vgaarb: loaded
     
215. SCSI subsystem initialized
     
216. ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
     
217. ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
     
218. spi_master spi0: will run message pump with realtime priority
     
219. usbcore: registered new interface driver usbfs
     
220. usbcore: registered new interface driver hub
     
221. usbcore: registered new device driver usb
     
222. media: Linux media interface: v0.10
     
223. Linux video capture interface: v2.00
     
224. hisi_iommu_ptable_addr:phy 0x1d800000    size:0x400000
     
225. hisi_iommu_err_rdaddr :phy 0x1dea0c00    size:0x200
     
226. hisi_iommu_err_wraddr :phy 0x1dea0e00     size:0x200
     
227. in hisi_iommu_domain_init start
     
228. in hisi_iommu_domain_init end
     
229. Advanced Linux Sound Architecture Driver Initialized.
     
230. Bluetooth: Core ver 2.19
     
231. NET: Registered protocol family 31
     
232. Bluetooth: HCI device and connection manager initialized
     
233. Bluetooth: HCI socket layer initialized
     
234. Bluetooth: L2CAP socket layer initialized
     
235. Bluetooth: SCO socket layer initialized
     
236. Switched to clocksource arch_sys_counter
     
237. NET: Registered protocol family 2
     
238. TCP established hash table entries: 4096 (order: 2, 16384 bytes)
     
239. TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
     
240. TCP: Hash tables configured (established 4096 bind 4096)
     
241. TCP: reno registered
     
242. UDP hash table entries: 256 (order: 1, 8192 bytes)
     
243. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
     
244. NET: Registered protocol family 1
     
245. RPC: Registered named UNIX socket transport module.
     
246. RPC: Registered udp transport module.
     
247. RPC: Registered tcp transport module.
     
248. RPC: Registered tcp NFSv4.1 backchannel transport module.
     
249. Trying to unpack rootfs image as initramfs...
     
250. Freeing initrd memory: 344K (c4000000 - c4056000)
     
251. hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available
     
252. CPU PMU: attempt to register multiple PMU devices!
     
253. arm-pmu: probe of arm-pmu failed with error -28
     
254. futex hash table entries: 1024 (order: 4, 65536 bytes)
     
255. audit: initializing netlink subsys (disabled)
     
256. audit: type=2000 audit(0.283:1): initialized
     
257. VFS: Disk quotas dquot_6.5.2
     
258. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
     
259. squashfs: version 4.0 (2009/01/31) Phillip Lougher
     
260. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
     
261. fuse init (API version 7.23)
     
262. msgmni has been set to 939
     
263. bounce: pool size: 64 pages
     
264. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
     
265. io scheduler noop registered
     
266. io scheduler deadline registered (default)
     
267. io scheduler cfq registered
     
268. brd: module loaded
     
269. loop: module loaded
     
270. zram: Created 1 device(s) ...
     
271. hifmc100: registerd new interface driver hifmc100.
     
272. hifmc100: Found flash memory controller hifmc100.
     
273. hifmc100: no found spi-nor device.
     
274. hifmc100: no found nand device.
     
275. tun: Universal TUN/TAP device driver, 1.6
     
276. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
     
277. FEPHY:addr=2, la_am=0xe, ldo_am=0x4, r_tuning=0x16
     
278. libphy: himii: probed
     
279. hi_eth: attached port 0 PHY 2 to driver HiSilicon Festa s28v112
     
280. platform f9840000.ethernet: Driver hi_gmac_v200 requests probe deferral
     
281. PPP generic driver version 2.4.2
     
282. PPP BSD Compression module registered
     
283. PPP Deflate Compression module registered
     
284. PPP MPPE Compression module registered
     
285. NET: Registered protocol family 24
     
286. usbcore: registered new interface driver asix
     
287. usbcore: registered new interface driver ax88179_178a
     
288. usbcore: registered new interface driver cdc_ether
     
289. usbcore: registered new interface driver dm9601
     
290. usbcore: registered new interface driver net1080
     
291. usbcore: registered new interface driver cdc_subset
     
292. usbcore: registered new interface driver zaurus
     
293. usbcore: registered new interface driver cdc_ncm
     
294. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
     
295. ehci-pci: EHCI PCI platform driver
     
296. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
     
297. ohci-pci: OHCI PCI platform driver
     
298. usbcore: registered new interface driver cdc_wdm
     
299. usbcore: registered new interface driver usb-storage
     
300. usbcore: registered new interface driver usbserial
     
301. usbcore: registered new interface driver option
     
302. usbserial: USB Serial support registered for GSM modem (1-port)
     
303. hiudc: version 3.00a 10-AUG-2012
     
304. Core Release: 3.10a
     
305. Setting default values for core params
     
306. Using Buffer DMA mode
     
307. Dedicated Tx FIFOs mode
     
308. file system registered
     
309. mousedev: PS/2 mouse device common for all mice
     
310. i2c /dev entries driver
     
311. usbcore: registered new interface driver uvcvideo
     
312. USB Video Class driver (1.1.1)
     
313. sp805-wdt f8a2c000.watchdog: registration successful
     
314. device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
     
315. scan edges:2 p2f:4 f2p:6
     
316. mix set temp-phase 1
     
317. scan elemnts: startp:81 endp:77
     
318. Tuning SampleClock. mix set phase:[01/07] ele:[09/14]
     
319. f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
     
320. mmc0: new HS400 MMC card at address 0001
     
321. mmcblk0: mmc0:0001 DG4008 7.28 GiB
     
322. mmcblk0boot0: mmc0:0001 DG4008 partition 1 4.00 MiB
     
323. mmcblk0boot1: mmc0:0001 DG4008 partition 2 4.00 MiB
     
324. mmcblk0rpmb: mmc0:0001 DG4008 partition 3 4.00 MiB
     
325. mmcblk0: p1(fastboot) p2(bootargs) p3(recovery) p4(swdevinfo) p5(baseparam) p6(pqparam) p7(logo) p8(fastplay) p9(kernel) p10(misc) p11(trustedcore) p12(securestore) p13(properties) p14(cache) p15(private) p16(otapackage_tmp) p17(system) p18(otapackage) p19(userdata)
     
326. f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
     
327. hidraw: raw HID events driver (C) Jiri Kosina
     
328. usbcore: registered new interface driver usbhid
     
329. usbhid: USB HID core driver
     
330. ashmem: initialized
     
331. logger: created 4096K log 'log_main'
     
332. logger: created 256K log 'log_events'
     
333. logger: created 256K log 'log_radio'
     
334. logger: created 256K log 'log_system'
     
335. hiahci-phy: registered new sata phy driver
     
336. input: Hi keyboard as /devices/virtual/input/input0
     
337. input: Hi mouse as /devices/virtual/input/input1
     
338. input: qwerty as /devices/virtual/input/input2
     
339. Hi Android vinput driver init successful!
     
340. hiotg: registered new interface otg driver
     
341. Registering sdcardfs 2.1.3
     
342. vdd-gpu: 700 <--> 1250 mV at 910 mV
     
343. Mali: Mali device driver loaded
     
344. usbcore: registered new interface driver snd-usb-audio
     
345. oprofile: using timer interrupt.
     
346. GACT probability on
     
347. Mirror/redirect action on
     
348. Simple TC action Loaded
     
349. netem: version 1.3
     
350. u32 classifier
     
351.     Performance counters on
     
352.     input device check on
     
353.     Actions configured
     
354. Netfilter messages via NETLINK v0.30.
     
355. nf_conntrack version 0.5.0 (14964 buckets, 59856 max)
     
356. ctnetlink v0.93: registering with nfnetlink.
     
357. xt_time: kernel timezone is -0000
     
358. IPVS: Registered protocols ()
     
359. IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
     
360. IPVS: Creating netns size=792 id=0
     
361. IPVS: ipvs loaded.
     
362. ip_tables: (C) 2000-2006 Netfilter Core Team
     
363. ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
     
364. arp_tables: (C) 2002 David S. Miller
     
365. TCP: cubic registered
     
366. NET: Registered protocol family 10
     
367. ip6_tables: (C) 2000-2006 Netfilter Core Team
     
368. NET: Registered protocol family 17
     
369. bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
     
370. Bridge firewalling registered
     
371. Bluetooth: RFCOMM TTY layer initialized
     
372. Bluetooth: RFCOMM socket layer initialized
     
373. Bluetooth: RFCOMM ver 1.11
     
374. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
     
375. Bluetooth: BNEP filters: protocol multicast
     
376. Bluetooth: BNEP socket layer initialized
     
377. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
     
378. Bluetooth: HIDP socket layer initialized
     
379. 8021q: 802.1Q VLAN Support v1.8
     
380. lib80211: common routines for IEEE802.11 drivers
     
381. Registering SWP/SWPB emulation handler
     
382. libphy: higmac_mii_bus: probed
     
383. No eth phy found at address 1
     
384. hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
     
385. ALSA device list:
     
386.   #0: HISI-AIAO
     
387. Freeing unused kernel memory: 616K (c11e5000 - c127f000)
     
388. init: /init.bigfish.rc: 55: invalid command 'getprop'
     
389. init: /init.bigfish.rc: 114: invalid option 'sdcard_r'
     
390. init: /init.bigfish.rc: 219: invalid option '//add'
     
391. init: /init.bigfish.rc: 371: invalid command '//insmod'
     
392. init: /init.bigfish.rc: 395: ignored duplicate definition of service 'logtousb'
     
393. init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
     
394. init: /dev/hw_random not found
     
395. init: cannot open '/initlogo.rle'
     
396. EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: (null)
     
397. EXT4-fs (mmcblk0p19): recovery complete
     
398. EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: (null)
     
399. EXT4-fs (mmcblk0p14): recovery complete
     
400. EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
     
401. EXT4-fs (mmcblk0p15): recovery complete
     
402. EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)
     
403. EXT4-fs (mmcblk0p18): recovery complete
     
404. EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
     
405. EXT4-fs (mmcblk0p12): VFS: Can't find ext4 filesystem
     
406. init: /dev/hw_random not found
     
407. healthd: wakealarm_init: timerfd_create failed
     
408. init: cannot find '/system/bin/rild', disabling 'ril-daemon'
     
409. init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
     
410. init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
     
411. init: cannot find '/system/bin/dongleservice', disabling 'dongleservice'
     
412. init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
     
413. init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
     
414. init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
     
415. init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
     
416. sdcardfs: version 2.1.3
     
417. sdcardfs: dev_name -> /data/media
     
418. sdcardfs: options -> fsuid=1023,fsgid=1023,mask=0,userid=0,gid=1015,reserved_mb=20
     
419. sdcardfs: mounted on top of /data/media type ext4
     
420. init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
     
421. init: powerctl: cannot expand '${sys.powerctl}'
     
422. init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
     
423. init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
     
424. healthd: No charger supplies found
     
425. healthd: BatteryStatusPath not found
     
426. healthd: BatteryHealthPath not found
     
427. healthd: BatteryPresentPath not found
     
428. healthd: BatteryCapacityPath not found
     
429. healthd: BatteryVoltagePath not found
     
430. healthd: BatteryTemperaturePath not found
     
431. healthd: BatteryTechnologyPath not found
     
432. random: init urandom read with 30 bits of entropy available
     
433. ====write bit delay
     
434. ======== Card detection to detect SDIO card! test========
     
435. ===>insmod sdio detect ko
     
436. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
     
437. 
     
438. 
     
439. Welcome to HiAndroid
     
440. 
     
441. 
     
442. ehci-platform: EHCI generic platform driver
     
443. ehci-platform f9890000.ehci: EHCI Host Controller
     
444. ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
     
445. ehci-platform f9890000.ehci: irq 98, io mem 0xf9890000
     
446. ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
     
447. hub 1-0:1.0: USB hub found
     
448. hub 1-0:1.0: 2 ports detected
     
449. ohci-platform: OHCI generic platform driver
     
450. ohci-platform f9880000.ohci: Generic Platform OHCI controller
     
451. ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
     
452. ohci-platform f9880000.ohci: irq 99, io mem 0xf9880000
     
453. hub 2-0:1.0: USB hub found
     
454. hub 2-0:1.0: 2 ports detected
     
455. zram0: detected capacity change from 0 to 104857600
     
456. xhci-hcd f98a0000.xhci: xHCI Host Controller
     
457. xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
     
458. xhci-hcd f98a0000.xhci: irq 101, io mem 0xf98a0000
     
459. Adding 102396k swap on /dev/block/zram0.  Priority:-1 extents:1 across:102396k SS
     
460. hub 3-0:1.0: USB hub found
     
461. hub 3-0:1.0: 1 port detected
     
462. xhci-hcd f98a0000.xhci: xHCI Host Controller
     
463. xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
     
464. hub 4-0:1.0: USB hub found
     
465. hub 4-0:1.0: 1 port detected
     
466. tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
     
467. Disabling lock debugging due to kernel taint
     
468. Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].
     
469. Built against headers 3.18.24_hi3798mv2x #1 SMP Mon Dec 11 18:33:22 CST 2017 arm
     
470. Running on kernel 3.18.24_hi3798mv2x #1 SMP Sun Apr 23 17:10:58 CST 2023 armv7l
     
471. init: sys_prop: permission denied uid:1000  name:ro.config.gfx2d_compose
     
472. ahci: probe of f9900000.hiahci failed with error -1
     
473. rtk_btusb: RTKBT_RELEASE_NAME: 20180824_TV_ANDROID_4.4(Beta)
     
474. rtk_btusb: Realtek Bluetooth USB driver module init, version 4.2.1
     
475. rtk_btusb: Register usb char device interface for BT driver
     
476. usbcore: registered new interface driver rtk_btusb
     
477. [14:39:52:954 ERROR-HI_TUNER]:select_demod_type[963]:unsupported demod type: 269
     
478. [14:39:52:961 ERROR-HI_TUNER]:tuner_select_type[1291]:select_demod_type error
     
479. card connected!
     
480. himciv200 f9c40000.himciv200.SD: card claims to support voltages below defined range
     
481. himciv300_wait_cmd_complete:729:
     
482. himciv200_2: wait cmd request complete is timeout!Raw interrupt status 0x00000000, CMD11(0)
     
483. himciv300_cur_status:111:  [CRG:0X40103 CIU:0X0 BIU:0X0 RINT:0X0 STS:0X5906 IDSTS:0X0]
     
484. 
     
485. scan edges:1 p2f:4 f2p:5
     
486. mix set temp-phase 0
     
487. scan elemnts: startp:35 endp:28
     
488. Tuning SampleClock. mix set phase:[00/07] ele:[03/07]
     
489. mmc2: new ultra high speed SDR104 SDIO card at address 0001
     
490. binder: 1705:1983 ERROR: BC_REGISTER_LOOPER called without request
     
491. binder: 1705:1986 ERROR: BC_REGISTER_LOOPER called without request
     
492. binder: 1705:1988 ERROR: BC_REGISTER_LOOPER called without request
     
493. binder: 1705:1989 ERROR: BC_REGISTER_LOOPER called without request
     
494. ===>retry 1 timebinder: 1705:1985 ERROR: BC_REGISTER_LOOPER called without request
     
495. s
     
496. binder: 1705:1982 ERROR: BC_REGISTER_LOOPER called without request
     
497. ===>get pid_vid is 024C:B822
     
498. ===>rtl8822BS
     
499. [rfkill]: sw_rfkill_init
     
500. init: untracked pid 2181 exited
     
501. hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx
     
502. IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
     
503. lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
     
504. lowmemorykiller: oom_adj 0 => oom_score_adj 0
     
505. lowmemorykiller: oom_adj 2 => oom_score_adj 117
     
506. lowmemorykiller: oom_adj 4 => oom_score_adj 235
     
507. lowmemorykiller: oom_adj 6 => oom_score_adj 352
     
508. lowmemorykiller: oom_adj 9 => oom_score_adj 529
     
509. lowmemorykiller: oom_adj 15 => oom_score_adj 1000
     
510. random: nonblocking pool is initialized
     
511. capability: warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)
     
512. init: sys_prop: permission denied uid:1014  name:sys.net.dhcp.xid
     
513. init: sys_prop: permission denied uid:1014  name:sys.net.dhcp.pid
     
514. inputblock: disable block
     
515. init: untracked pid 1166 exited
     
516. init: sys_prop: permission denied uid:1000  name:persist.ijkplayer.timeout
     
517. 
     

复制代码

刷海纳思，提示fastboot失败。。。

能刷什么电视盒子呢？？？