CPE870 ar9341 500mw 有人玩过么？？

sowxf

这个CPE有人玩过么。。。。有没有人知道怎么改MA的。。以下是TTL信息
U-Boot 1.1.413 (Jan 22 2013 - 05:23:45)

U-boot AP123
DRAM:  32 MB
Flash:  8 MB
In:    serial
Out:   serial
Err:   serial
Net:   
eth0: 68:d3:8d:b6:fc:56
eth0 up
eth1: 00:03:5f:1d:26:c0
eth1 up
eth0, eth1
Hit any key to stop autoboot:  0
## Booting image at 9f380000 ...
   Image Name:   Linux Kernel Image
   Created:      2014-12-09   8:25:42 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    971269 Bytes = 948.5 kB
   Load Address: 80002000
   Entry Point:  802079f0
   Verifying Checksum at 0x9f380040 ...OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 802079f0) ...
## Giving linux memsize in bytes, 33554432

Starting kernel ...

Booting Atheros AR934x
init started: BusyBox v1.15.0 (2014-11-05 12:23:15 CST)
starting pid 19, tty '': '/etc/rc.d/rcS'
Ziking Copyright 2014....
Not found /etc/rc.d/rc.fs
load driver
wifi1     no private ioctls.

Set System Time

        厂商名称:     YL
          AP模式:     Thin AP
        设备型号:     CPE870
        软件版本:     v1.1.0
        硬件版本:     CPE870-H5.0
      内部版本号:     312E342E33

         有线MAC:    683:8D:B6:FC56
     2.4G无线MAC:     683:8D:B6:FC:57
          序列号:     001122334855

请确认是否修改MAC地址和序列号(y/n)?
Start bridge
Lan initialize
device eth0 is not a slave of br0
wlan initialize
Wlan Device, Create wifi-wlan16 and manager wlan5
Create master sta ap
wifi0_wlan0
Create EXT_AP dev
wifi0_wlan12
wifi0_wlan13
wifi0_wlan14
Start Lan
Start Wlan
config all wlan interface
Config wifi0_wlan0
Config wifi0_wlan0
Config master sta ap
makevap wifi0_wlan0
Create EXT_AP dev
makevap wifi0_wlan12
makevap wifi0_wlan13
makevap wifi0_wlan14
build hostapd config()
build_all_hostapd_wlan_config()
build wpa_supplicant config
Start Web
fchown logfile: Read-only file system
mini_httpd: started as root without requesting chroot(), warning only
Start Log
Start BuildLog
crc0=0xeb921d75
crc1=0xeb921d75
crc0=0xeb921d75
crc1=0xeb921d75
Start Firewall init
Start Wan
killall: udhcpc: no process killed
killall: ntp.sh: no process killed
killall: ntpclient: no process killed
Killed
Cannot find device "root"
Start DHCP mode...
route: ioctl 0x890c failed: No such process
Start lltdd
libupnp: using UDP SSDP_PORT = 1900
Start mgr_lan
upnpd[772]: UPnP SDK Successfully Initialized.
upnpd[772]: Succesfully set the Web Server Root Directory.
upnpd[772]: IGD root device successfully registered.
Start Snmp
starting pid 821, tty '': '/bin/getty ttyS0 115
CPE870 mips #3 Tue Dec 9 16:25:21 CST 2014 (none)
CPE870 login: upnpd[772]: Advertisements Sent.  Listening for requests ...



按Y后出现这个，，
Set System Time
yy
        厂商名称:     YL
          AP模式:     Thin AP
        设备型号:     CPE870
        软件版本:     v1.1.0
        硬件版本:     CPE870-H5.0
      内部版本号:     312E342E33

         有线MAC:    683:8D:B6:FC56
     2.4G无线MAC:     683:8D:B6:FC:57
          序列号:     001122334855

请确认是否修改MAC地址和序列号(y/n)?

输入MAC地址 :003:8D:B6:6F:85

输入MAC地址 :

输进了还是改不了

lqd12

这个应该带功放吧！！

sowxf

lqd12 发表于 2016-4-18 21:23
这个应该带功放吧！！

是带功放的。。是联通的CPE改的这个固件。。

lqd12

sowxf 发表于 2016-4-19 13:56
是带功放的。。是联通的CPE改的这个固件。。

刷个breed就顺便改mac了

sowxf

lqd12 发表于 2016-4-19 14:11
刷个breed就顺便改mac了

刷breed固件不启动

暗恋师妹八九年

mac一般再结尾，可以改的，这个固件，有bug

木木夕格

这个固件怎么进后台？

78009425

楼主，固件能给个吗78009425@qq.com，谢谢