TP1043NDUSB口共享的问题

cccc12

我已经按照说明书里的说明设置了NETworksharing里的设置，但是访问路由器IP地址\sharename的时候却只看到以下提示，却没有叫我输入用户名，不知道哪里有问题，请各位DX指教。 设置如图

Username or Password is incorrect.
Please refer to the troubleshooting below:


Is the "Caps Lock" enabled on your keyboard?
The username and password must be lowercase, please ensure that the "Caps Lock" LED is disabled on your keyboard and try again.

Forgot your username or password?
Please reset the device to the factory default settings if you have forgotten your username or password. The default username and password are both set as "admin".
Note: The settings will be restored to factory default after the resetting.

How to restore the device to the factory default settings?
Firstly locate the reset button on the rear panel of the unit, whilst the device is powered on press and hold the reset button for more than 5 seconds, the device will then reboot and restore itself to the factory default settings.

shuqiguo

注意大小写
这个功能有啥用？鸡肋啊

shuqiguo

我也有个这个路由