求助！360t7刷不了uboot

viatur

root@Openwrt:/# mtd write tmp/360t7-fip-fixed-parts.bin
Usage: mtd [<options> ...] <command> [<arguments> ...] <device>[:<device>...]

The device is in the format of mtdX (eg: mtd4) or its label.
mtd recognizes these commands:
        unlock                  unlock the device
        refresh                 refresh mtd partition
        erase                   erase all data on device
        verify <imagefile>|-    verify <imagefile> (use - for stdin) to device
        write <imagefile>|-     write <imagefile> (use - for stdin) to device
        jffs2write <file>       append <file> to the jffs2 partition on the device
Following options are available:
        -q                      quiet mode (once: no [w] on writing,
                                           twice: no status messages)
        -n                      write without first erasing the blocks
        -r                      reboot after successful command
        -f                      force write without trx checks
        -e <device>             erase <device> before executing the command
        -d <name>               directory for jffs2write, defaults to "tmp"
        -j <name>               integrate <file> into jffs2 data when writing an image
        -s <number>             skip the first n bytes when appending data to the jffs2 partiton, defaults to "0"
        -p <number>             write beginning at partition offset
        -l <length>             the length of data that we want to dump

Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards
         mtd -r write linux.trx linux


有大佬知道是什么原因吗？

tangdashen1996

Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards
         mtd -r write linux.trx linux

正确是
mtd write /tmp/360t7-fip-fixed-parts.bin fip

leclerc

mtd write tmp/360t7-fip-fixed-parts.bin后面还要加上fip