AX6000总是掉线，下面是问题记录麻烦懂的告知

w506

Software-Version
-------------------------------------------------
OpenWrt - ImmortalWrt 21.02-SNAPSHOT r20325-53eae01db7
LuCI - git-23.098.38725-847bd6b


Output of "ip a show"
-------------------------------------------------
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br-lan state UP group default qlen 1000
    link/ether 4c:c6:4c:81:1c:31 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 44:df:65:2b:d6:1f brd ff:ff:ff:ff:ff:ff
    inet6 fe80::46df:65ff:fe2b:d61f/64 scope link
       valid_lft forever preferred_lft forever
4: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
    link/sit 0.0.0.0 brd 0.0.0.0
5: ra0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br-lan state UNKNOWN group default qlen 1000
    link/ether 4c:c6:4c:81:1c:32 brd ff:ff:ff:ff:ff:ff
6: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 4c:c6:4c:81:1c:31 brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.1/24 brd 192.168.31.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fd8c:6133:9a34::1/60 scope global noprefixroute
       valid_lft forever preferred_lft forever
    inet6 fe80::4ec6:4cff:fe81:1c31/64 scope link
       valid_lft forever preferred_lft forever
8: rax0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br-lan state UNKNOWN group default qlen 1000
    link/ether 4e:c6:4c:91:1c:32 brd ff:ff:ff:ff:ff:ff
9: apcli0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 4a:c6:4c:81:1c:32 brd ff:ff:ff:ff:ff:ff
10: apclix0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 46:c6:4c:81:1c:32 brd ff:ff:ff:ff:ff:ff
15: eth1.3@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 44:df:65:2b:d6:1f brd ff:ff:ff:ff:ff:ff
    inet6 fe80::46df:65ff:fe2b:d61f/64 scope link
       valid_lft forever preferred_lft forever
16: pppoe-wan2: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc fq_codel state UNKNOWN group default qlen 3
    link/ppp
    inet 10.105.19.168 peer 10.105.0.1/32 scope global pppoe-wan2
       valid_lft forever preferred_lft forever
    inet6 fd8c:6133:9a34:10::1/64 scope global noprefixroute
       valid_lft forever preferred_lft forever
    inet6 fe80::46df:658b:7f2b:d61f/128 scope link
       valid_lft forever preferred_lft forever
17: pppoe-wan: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc fq_codel state UNKNOWN group default qlen 3
    link/ppp
    inet 100.72.114.248 peer 100.72.64.1/32 scope global pppoe-wan
       valid_lft forever preferred_lft forever
    inet6 fe80::d996:b0df:bdf4:660/128 scope link
       valid_lft forever preferred_lft forever


Output of "ip route show"
-------------------------------------------------
default via 100.72.64.1 dev pppoe-wan proto static metric 40
default via 10.105.0.1 dev pppoe-wan2 proto static metric 60
10.105.0.1 dev pppoe-wan2 proto kernel scope link src 10.105.19.168
100.72.64.1 dev pppoe-wan proto kernel scope link src 100.72.114.248
192.168.31.0/24 dev br-lan proto kernel scope link src 192.168.31.1


Output of "ip rule show"
-------------------------------------------------
0:        from all lookup local
32766:        from all lookup main
32767:        from all lookup default


Output of "ip route list table 1-250"
-------------------------------------------------
Table 1: default via 100.72.64.1 dev pppoe-wan proto static metric 40
100.72.64.1 dev pppoe-wan proto kernel scope link src 100.72.114.248
Table 2: default via 10.105.0.1 dev pppoe-wan2 proto static metric 60


Output of "iptables -L -t mangle -v -n"
-------------------------------------------------
Chain PREROUTING (policy ACCEPT 930K packets, 365M bytes)
pkts bytes target     prot opt in     out     source               destination         

Chain INPUT (policy ACCEPT 123K packets, 40M bytes)
pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 789K packets, 317M bytes)
pkts bytes target     prot opt in     out     source               destination         
28892 1771K TCPMSS     tcp  --  *      pppoe-wan  0.0.0.0/0            0.0.0.0/0            tcp flags:0x06/0x02 /* !fw3: Zone wan MTU fixing */ TCPMSS clamp to PMTU
24759 1337K TCPMSS     tcp  --  pppoe-wan *       0.0.0.0/0            0.0.0.0/0            tcp flags:0x06/0x02 /* !fw3: Zone wan MTU fixing */ TCPMSS clamp to PMTU
    0     0 TCPMSS     tcp  --  *      pppoe-wan2  0.0.0.0/0            0.0.0.0/0            tcp flags:0x06/0x02 /* !fw3: Zone wan MTU fixing */ TCPMSS clamp to PMTU
    0     0 TCPMSS     tcp  --  pppoe-wan2 *       0.0.0.0/0            0.0.0.0/0            tcp flags:0x06/0x02 /* !fw3: Zone wan MTU fixing */ TCPMSS clamp to PMTU

Chain OUTPUT (policy ACCEPT 105K packets, 32M bytes)
pkts bytes target     prot opt in     out     source               destination         

Chain POSTROUTING (policy ACCEPT 891K packets, 349M bytes)
pkts bytes target     prot opt

w506

到底什么问题有知道的告知一下，已经刷过很多固件了，问题依旧，是否刷的不死系统的问题？

Maximilian

小米做工的问题

水云天长

实在不行试试，
计划任务，
设置每天定时重拨，
一次不行就两次。。。。

w506

水云天长 发表于 2024-1-22 23:09
实在不行试试，
计划任务，
设置每天定时重拨，

我这个是双线双拨，设置重启就只能显示一条在线另外一条，必须要更改一下策略才能正常。

ffl545

我官固刷的shellclash也是，不能说经常吧，但是总有偶尔重启的问题

xxgg

目前 237 大佬固件 还算正常 没发现大的bug  可以试试 ，并且他还给出了 他固件的双线双拨教程

w506

ewqewq 发表于 2024-1-23 18:17
目前 237 大佬固件 还算正常 没发现大的bug  可以试试 ，并且他还给出了 他固件的双线双拨教程 ...

麻烦给个链接。

xxgg

w506 发表于 2024-1-23 21:32
麻烦给个链接。

https://www.right.com.cn/forum/thread-8261104-1-1.html

xxgg

红米6000  mt798X 双WAN 设置教程
https://www.123pan.com/s/6610Vv-DuIZh.html

w506

ewqewq 发表于 2024-1-24 11:32
红米6000  mt798X 双WAN 设置教程
https://www.123pan.com/s/6610Vv-DuIZh.html

谢谢