我家云，openmediavault-4.1.27.1-Arrakis

zero264

感谢大佬，测试了armbian的几个版本，有掉了就挂不回去的情况，麻烦大佬看看有没有解？
Nov 10 23:17:14 localhost kernel: [    2.210969] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Nov 10 23:17:14 localhost kernel: [    2.210997] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
Nov 10 23:17:14 localhost kernel: [    2.211206] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
Nov 10 23:17:14 localhost kernel: [    2.211277] xhci-hcd xhci-hcd.0.auto: irq 170, io mem 0xff600000
Nov 10 23:17:14 localhost kernel: [    2.211845] usb usb4: Manufacturer: Linux 5.3.0-rockchip64 xhci-hcd
Nov 10 23:17:14 localhost kernel: [    2.211855] usb usb4: SerialNumber: xhci-hcd.0.auto
Nov 10 23:17:14 localhost kernel: [    2.213054] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Nov 10 23:17:14 localhost kernel: [    2.213077] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
Nov 10 23:17:14 localhost kernel: [    2.213099] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Nov 10 23:17:14 localhost kernel: [    2.213453] usb usb5: Manufacturer: Linux 5.3.0-rockchip64 xhci-hcd
Nov 10 23:17:14 localhost kernel: [    2.213463] usb usb5: SerialNumber: xhci-hcd.0.auto
Nov 10 23:17:14 localhost kernel: [    2.548704] usb 4-1: new high-speed USB device number 2 using xhci-hcd
Nov 10 23:17:14 localhost kernel: [    2.853444] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
Nov 10 23:17:14 localhost kernel: [    8.416781] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 10 23:17:14 localhost kernel: [   12.888596] usb 5-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 10 23:23:36 localhost kernel: [   51.157857] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 10 23:23:42 localhost kernel: [   56.533879] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 10 23:23:42 localhost kernel: [   57.070314] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 11 00:15:13 localhost kernel: [ 3148.063590] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 00:15:19 localhost kernel: [ 3153.439625] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 00:15:19 localhost kernel: [ 3153.976058] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 11 00:23:25 localhost kernel: [ 3640.108186] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 00:23:31 localhost kernel: [ 3645.484346] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 00:23:31 localhost kernel: [ 3646.020701] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 11 02:09:56 localhost kernel: [10030.800886] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:10:01 localhost kernel: [10036.177001] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:10:08 localhost kernel: [10043.089186] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
Nov 11 02:10:08 localhost kernel: [10043.105208] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
Nov 11 02:10:08 localhost kernel: [10043.105218] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
Nov 11 02:10:08 localhost kernel: [10043.105276] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
Nov 11 02:10:08 localhost kernel: [10043.105453] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:17:57 localhost kernel: [    2.210987] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Nov 11 02:17:57 localhost kernel: [    2.211017] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
Nov 11 02:17:57 localhost kernel: [    2.211224] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
Nov 11 02:17:57 localhost kernel: [    2.211295] xhci-hcd xhci-hcd.0.auto: irq 170, io mem 0xff600000
Nov 11 02:17:57 localhost kernel: [    2.211876] usb usb4: Manufacturer: Linux 5.3.0-rockchip64 xhci-hcd
Nov 11 02:17:57 localhost kernel: [    2.211886] usb usb4: SerialNumber: xhci-hcd.0.auto
Nov 11 02:17:57 localhost kernel: [    2.213095] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Nov 11 02:17:57 localhost kernel: [    2.213117] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
Nov 11 02:17:57 localhost kernel: [    2.213140] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Nov 11 02:17:57 localhost kernel: [    2.213450] usb usb5: Manufacturer: Linux 5.3.0-rockchip64 xhci-hcd
Nov 11 02:17:57 localhost kernel: [    2.213460] usb usb5: SerialNumber: xhci-hcd.0.auto
Nov 11 02:17:57 localhost kernel: [    2.548816] usb 4-1: new high-speed USB device number 2 using xhci-hcd
Nov 11 02:17:57 localhost kernel: [    2.860971] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
Nov 11 02:17:57 localhost kernel: [    3.225248] usb 5-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
Nov 11 02:33:28 localhost kernel: [  943.104374] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:33:33 localhost kernel: [  948.476530] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command
Nov 11 02:33:40 localhost kernel: [  955.388606] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
Nov 11 02:33:40 localhost kernel: [  955.404621] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
Nov 11 02:33:40 localhost kernel: [  955.404628] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
Nov 11 02:33:40 localhost kernel: [  955.404666] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
Nov 11 02:33:40 localhost kernel: [  955.404759] xhci-hcd xhci-hcd.0.auto: Timeout while waiting for setup device command

xiaoke0031

楼主，请问安装完docker后弹出了这个窗口是什么原因？

Ride_Wind

xiaoke0031 发表于 2019-11-11 18:36
楼主，请问安装完docker后弹出了这个窗口是什么原因？

omv报这种错误很正常。。。不用管。刷新下页面或者关掉就行。

L33

纯omv系统下，有必要再安装个webmin吗？

pgou

omv要是能支持ipv6就好了

HK$

带docker那个OMV只锁了linux-headers这个，这样就可以了吗？linux-image和dtb不需要锁吗？

Ride_Wind

HK$ 发表于 2019-11-12 10:48
带docker那个OMV只锁了linux-headers这个，这样就可以了吗？linux-image和dtb不需要锁吗？

按说都锁了啊。

HK$

Ride_Wind 发表于 2019-11-12 10:54
按说都锁了啊。

用apt-mark showhold看只有headers这个。需要自己再锁一下image吗

Ride_Wind

HK$ 发表于 2019-11-12 11:20
用apt-mark showhold看只有headers这个。需要自己再锁一下image吗

自己锁吧，估计我装什么时候自动解除了。不锁也不会更新，除非你加了主线内核的源。

HK$

Ride_Wind 发表于 2019-11-12 11:37
自己锁吧，估计我装什么时候自动解除了。不锁也不会更新，除非你加了主线内核的源。

dtb需要锁吗？用apt-mark showmanual命令看不到dtb呢

Ride_Wind

锁内核的时候把image替换成dtb就对了

HK$

Ride_Wind 发表于 2019-11-12 12:15
锁内核的时候把image替换成dtb就对了

不行呢，提示找不到软件包

Ride_Wind

HK$ 发表于 2019-11-12 12:21
不行呢，提示找不到软件包

呃呃呃，这个内核啊，dtb包含在内核中。

HK$

Ride_Wind 发表于 2019-11-12 12:23
呃呃呃，这个内核啊，dtb包含在内核中。

哦哦，那我锁了headers和image这两个就可以了吧？多谢~

imthbedo

期待，感谢大佬的付出。