|
楼主 |
发表于 2021-1-27 15:14
|
显示全部楼层
- login as: root
- root@192.168.15.1's password:
- BusyBox v1.31.1 () built-in shell (ash)
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- X-WRT 9.0_b202101181851, Hirsute
- -----------------------------------------------------
- root@X-WRT:~# dmesg
- [ 0.000000] Linux version 5.4.89 (ptpt52@SC-GAME) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15538+1-ce9d0c7dcf)) #0 Mon Jan 18 10:51:48 2021
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
- [ 0.000000] MIPS: machine is Arris SBR-AC1750
- [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] On node 0 totalpages: 65536
- [ 0.000000] Normal zone: 512 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
- [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jff s2
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, l inear)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, lin ear)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 251568K/262144K available (5019K kernel code, 149K rwdata , 1140K rodata, 1236K init, 195K bss, 10576K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 51
- [ 0.000000] random: get_random_bytes called from start_kernel+0x324/0x4f0 wit h crng_init=0
- [ 0.000000] CPU clock: 720.000 MHz
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 5309056796 ns
- [ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 59652 32126ns
- [ 0.008289] Calibrating delay loop... 359.42 BogoMIPS (lpj=718848)
- [ 0.042886] pid_max: default: 32768 minimum: 301
- [ 0.047939] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea r)
- [ 0.055724] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.065421] devtmpfs: initialized
- [ 0.071148] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns
- [ 0.081543] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.088818] pinctrl core: initialized pinctrl subsystem
- [ 0.094803] NET: Registered protocol family 16
- [ 0.104425] pstore: Registered ramoops as persistent store backend
- [ 0.111034] ramoops: using 0x80000@0x3f00000, ecc: 0
- [ 0.138528] workqueue: max_active 576 requested for napi_workq is out of rang e, clamping between 1 and 512
- [ 0.151485] clocksource: Switched to clocksource MIPS
- [ 0.159995] NET: Registered protocol family 2
- [ 0.165303] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 0.174245] TCP established hash table entries: 2048 (order: 1, 8192 bytes, l inear)
- [ 0.182424] TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.189952] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.196828] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 0.203822] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 0.211469] NET: Registered protocol family 1
- [ 0.216167] PCI: CLS 0 bytes, default 32
- [ 0.222568] workingset: timestamp_bits=30 max_order=16 bucket_order=0
- [ 0.234316] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.240556] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
- [ 0.261590] pinctrl-single 1804002c.pinmux: 544 pins, size 68
- [ 0.271083] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.279238] printk: console [ttyS0] disabled
- [ 0.283872] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 250 0000) is a 16550A
- [ 0.293062] printk: console [ttyS0] enabled
- [ 0.301959] printk: bootconsole [early0] disabled
- [ 0.315207] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
- [ 0.321694] nand: Macronix NAND 128MiB 3,3V 8-bit
- [ 0.326478] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64
- [ 0.334184] Scanning device for bad blocks
- [ 0.342967] random: fast init done
- [ 0.352679] Bad eraseblock 120 at 0x000000f00000
- [ 0.377614] Bad eraseblock 358 at 0x000002cc0000
- [ 0.438936] 7 fixed-partitions partitions found on MTD device ar934x-nand
- [ 0.445833] Creating 7 MTD partitions on "ar934x-nand":
- [ 0.451148] 0x000000000000-0x000000100000 : "u-boot"
- [ 0.457460] 0x000000100000-0x000000200000 : "boot-flag"
- [ 0.464601] 0x000000200000-0x000000600000 : "kernel"
- [ 0.471467] 0x000000600000-0x000006a00000 : "ubi"
- [ 0.478387] 0x000006a00000-0x000006b00000 : "ft"
- [ 0.484935] 0x000006b00000-0x000006d00000 : "PKI"
- [ 0.491538] 0x000006d00000-0x000006e00000 : "caldata"
- [ 0.499264] libphy: Fixed MDIO Bus: probed
- [ 0.821258] libphy: ag71xx_mdio: probed
- [ 0.827990] switch0: Atheros AR8337 rev. 2 switch registered on mdio.0
- [ 1.412838] ag71xx 19000000.eth: connected to PHY at mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
- [ 1.423887] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
- [ 1.745088] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000 , driver=Generic PHY]
- [ 1.754754] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii
- [ 1.761381] ath79-wdt 18060008.wdt: unable to register misc device, err=-16
- [ 1.768495] ath79-wdt: probe of 18060008.wdt failed with error -16
- [ 1.776366] NET: Registered protocol family 10
- [ 1.784517] Segment Routing with IPv6
- [ 1.788381] NET: Registered protocol family 17
- [ 1.792945] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 1.806096] 8021q: 802.1Q VLAN Support v1.8
- [ 1.812342] pstore: Using crash dump compression: deflate
- [ 1.818302] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
- [ 1.824542] MEM 0x0000000010000000..0x0000000011ffffff
- [ 1.829856] IO 0x0000000000000000..0x0000000000000000
- [ 1.835317] PCI host bridge to bus 0000:00
- [ 1.839512] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
- [ 1.846492] pci_bus 0000:00: root bus resource [io 0x0000]
- [ 1.852151] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 1.859039] pci_bus 0000:00: No busn resource found for root bus, will use [b us 00-ff]
- [ 1.867107] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
- [ 1.873259] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 1.880202] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 1.887079] pci 0000:00:00.0: supports D1 D2
- [ 1.892412] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 1.899164] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bi t]
- [ 1.906610] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref ]
- [ 1.916286] UBI: auto-attach mtd3
- [ 1.919706] ubi0: attaching mtd3
- [ 2.846310] ubi0: scanning is finished
- [ 2.861740] ubi0: attached mtd3 (name "ubi", size 100 MiB)
- [ 2.867348] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 2.874336] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 2.881230] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 2.888294] ubi0: good PEBs: 798, bad PEBs: 2, corrupted PEBs: 0
- [ 2.894393] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12 8
- [ 2.901726] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequ ence number: 1610967108
- [ 2.910990] ubi0: available PEBs: 0, total reserved PEBs: 798, PEBs reserved for bad PEB handling: 18
- [ 2.920399] ubi0: background thread "ubi_bgt0d" started, PID 357
- [ 2.927728] block ubiblock0_0: created from ubi0:0(rootfs)
- [ 2.933330] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- [ 2.945891] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
- [ 2.959175] devtmpfs: mounted
- [ 2.966650] Freeing unused kernel memory: 1236K
- [ 2.971263] This architecture does not have kernel memory protection.
- [ 2.977798] Run /sbin/init as init process
- [ 3.457568] init: Console is alive
- [ 3.461275] init: - watchdog -
- [ 5.659647] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 5.811903] usbcore: registered new interface driver usbfs
- [ 5.817571] usbcore: registered new interface driver hub
- [ 5.823069] usbcore: registered new device driver usb
- [ 5.865510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 5.880143] SCSI subsystem initialized
- [ 5.889072] ehci-fsl: Freescale EHCI Host controller driver
- [ 5.896949] ehci-platform: EHCI generic platform driver
- [ 5.902528] ehci-platform 1b000000.usb: EHCI Host Controller
- [ 5.908328] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
- [ 5.916375] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000
- [ 5.935492] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
- [ 5.942545] hub 1-0:1.0: USB hub found
- [ 5.946732] hub 1-0:1.0: 1 port detected
- [ 5.951272] ehci-platform 1b400000.usb: EHCI Host Controller
- [ 5.957087] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2
- [ 5.965156] ehci-platform 1b400000.usb: irq 15, io mem 0x1b400000
- [ 5.983504] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
- [ 5.990582] hub 2-0:1.0: USB hub found
- [ 5.994755] hub 2-0:1.0: 1 port detected
- [ 6.004332] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 6.012262] ohci-platform: OHCI generic platform driver
- [ 6.022244] usbcore: registered new interface driver usb-storage
- [ 6.030476] usbcore: registered new interface driver uas
- [ 6.036669] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
- [ 6.046445] init: - preinit -
- [ 6.385266] random: crng init done
- [ 8.785964] eth0: link up (1000Mbps/Full duplex)
- [ 8.795549] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 8.807573] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
- [ 13.034112] mount_root: loading kmods from internal overlay
- [ 13.114749] kmodloader: loading kernel modules from //etc/modules-boot.d/*
- [ 13.126183] kmodloader: done loading kernel modules from //etc/modules-boot.d /*
- [ 13.328785] UBIFS (ubi0:1): Mounting in unauthenticated mode
- [ 13.334700] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 531
- [ 13.429673] UBIFS (ubi0:1): recovery needed
- [ 13.614829] UBIFS (ubi0:1): recovery completed
- [ 13.619437] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root fs_data"
- [ 13.627392] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes
- [ 13.637456] UBIFS (ubi0:1): FS size: 85835776 bytes (81 MiB, 676 LEBs), journ al size 4317184 bytes (4 MiB, 34 LEBs)
- [ 13.648037] UBIFS (ubi0:1): reserved for root: 4054235 bytes (3959 KiB)
- [ 13.654757] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 3CD1E FCD-03AA-4075-9DF0-23670370A79C, small LPT model
- [ 13.669395] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
- [ 13.683395] block: extroot: not configured
- [ 13.687780] UBIFS (ubi0:1): un-mount UBI device 0
- [ 13.692600] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
- [ 13.702905] UBIFS (ubi0:1): Mounting in unauthenticated mode
- [ 13.708848] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 534
- [ 13.884228] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root fs_data"
- [ 13.892210] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes
- [ 13.902274] UBIFS (ubi0:1): FS size: 85835776 bytes (81 MiB, 676 LEBs), journ al size 4317184 bytes (4 MiB, 34 LEBs)
- [ 13.912865] UBIFS (ubi0:1): reserved for root: 4054235 bytes (3959 KiB)
- [ 13.919585] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 3CD1E FCD-03AA-4075-9DF0-23670370A79C, small LPT model
- [ 14.088772] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
- [ 14.101692] block: extroot: not configured
- [ 14.108153] mount_root: switching to ubifs overlay
- [ 14.142451] urandom-seed: Seeding with /etc/urandom.seed
- [ 14.250655] eth0: link down
- [ 14.271109] procd: - early -
- [ 14.274164] procd: - watchdog -
- [ 14.946220] procd: - watchdog -
- [ 14.954137] procd: - ubus -
- [ 15.127357] procd: - init -
- [ 16.387748] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 16.616461] urngd: v1.0.2 started.
- [ 16.711083] tun: Universal TUN/TAP device driver, 1.6
- [ 16.756829] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 16.793112] gre: GRE over IPv4 demultiplexor driver
- [ 16.814439] ip_gre: GRE over IPv4 tunneling driver
- [ 16.889849] ip6_gre: GRE over IPv6 tunneling driver
- [ 17.204258] Mirror/redirect action on
- [ 17.238956] u32 classifier
- [ 17.241747] input device check on
- [ 17.245473] Actions configured
- [ 17.295505] fuse: init (API version 7.31)
- [ 17.355826] {natcap}:natcap_init(): version: 8.0.0
- [ 17.360740] {natcap}:natcap_init(): natcap_major=250, natcap_minor=0
- [ 17.411779] {natcap}:natcap_peer_init(): natcap_peer_major=249, natcap_peer_m inor=0
- [ 17.460113] {natflow}:natflow_init(): natflow_major=248, natflow_minor=0
- [ 17.483575] {natflow}:natflow_zone_init(): natflow_zone_major=247, natflow_zo ne_minor=0
- [ 17.509616] {natflow}:natflow_user_init(): natflow_user_major=246, natflow_us er_minor=0
- [ 17.579643] Bridge firewalling registered
- [ 17.607923] usbcore: registered new interface driver cdc_wdm
- [ 17.636189] Loading modules backported from Linux version v5.8.18-0-gab435ce4 9bd1
- [ 17.643820] Backport generated by backports.git v5.8.18-1-0-ga630fd46
- [ 17.710820] usbcore: registered new interface driver ipheth
- [ 18.106909] nf_conntrack_rtsp v0.7 loading
- [ 18.191637] nf_nat_rtsp v0.7 loading
- [ 18.387866] usbcore: registered new interface driver r8152
- [ 18.439891] usbcore: registered new interface driver usblp
- [ 18.511783] usbcore: registered new interface driver usbserial_generic
- [ 18.518517] usbserial: USB Serial support registered for generic
- [ 18.586346] wireguard: WireGuard 1.0.20201112 loaded. See www.wireguard.com f or information.
- [ 18.594953] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c 4.com>. All Rights Reserved.
- [ 18.782046] xt_time: kernel timezone is -0000
- [ 18.794869] usbcore: registered new interface driver cdc_ether
- [ 18.823616] usbcore: registered new interface driver cdc_ncm
- [ 19.024855] usbcore: registered new interface driver huawei_cdc_ncm
- [ 19.119639] PPP generic driver version 2.4.2
- [ 19.127212] PPP MPPE Compression module registered
- [ 19.134365] NET: Registered protocol family 24
- [ 19.140806] p p t p driver version 0.8.5
- [ 19.148863] usbcore: registered new interface driver qmi_wwan
- [ 19.159086] usbcore: registered new interface driver rndis_host
- [ 19.169315] usbcore: registered new interface driver sierra
- [ 19.175091] usbserial: USB Serial support registered for Sierra USB modem
- [ 19.185562] usbcore: registered new interface driver sierra_net
- [ 19.237180] ath10k 5.8 driver, optimized for CT firmware, probing pci device: 0x3c.
- [ 19.246024] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
- [ 19.252584] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
- [ 21.180810] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
- [ 21.190218] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 21.202464] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad324 8 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemas k-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon -cb-CT,wmi-block-ack-CT crc32 3e4cf97f
- [ 21.452938] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c 08
- [ 21.523530] ath10k_pci 0000:00:00.0: otp calibration failed: 2
- [ 21.529465] ath10k_pci 0000:00:00.0: failed to run otp: -22 (download-cal-dat a)
- [ 21.536888] ath10k_pci 0000:00:00.0: could not init core (-22)
- [ 21.557906] ath10k_pci 0000:00:00.0: could not probe fw (-22)
- [ 21.634686] usbcore: registered new interface driver cdc_mbim
- [ 21.649505] usbcore: registered new interface driver option
- [ 21.655291] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 21.675013] usbcore: registered new interface driver qcserial
- [ 21.680969] usbserial: USB Serial support registered for Qualcomm USB modem
- [ 21.712167] ath: EEPROM regdomain sanitized
- [ 21.712176] ath: EEPROM regdomain: 0x64
- [ 21.712179] ath: EEPROM indicates we should expect a direct regpair map
- [ 21.712198] ath: Country alpha2 being used: 00
- [ 21.712202] ath: Regpair used: 0x64
- [ 21.729660] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 21.731376] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=13
- [ 21.819009] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 24.105100] /dev/sda1: Can't open blockdev
- [ 37.058684] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=SQM_IFB_6c84b
- [ 37.459693] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=SQM_IFB_48187
- [ 37.847167] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=SQM_IFB_dd38c
- [ 38.239709] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=SQM_IFB_0b6ad
- [ 38.408380] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=SQM_IFB_c65a9
- [ 44.380981] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=e th0, add ingress hook
- [ 44.392325] eth0: link up (1000Mbps/Full duplex)
- [ 44.407544] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 44.428640] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=e th0.1, add ingress hook
- [ 44.456074] br-lan: port 1(eth0.1) entered blocking state
- [ 44.461595] br-lan: port 1(eth0.1) entered disabled state
- [ 44.467360] device eth0.1 entered promiscuous mode
- [ 44.472254] device eth0 entered promiscuous mode
- [ 44.556520] br-lan: port 1(eth0.1) entered blocking state
- [ 44.562042] br-lan: port 1(eth0.1) entered forwarding state
- [ 44.567873] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=b r-lan, add ingress hook
- [ 44.678861] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=e th1, add ingress hook
- [ 44.689169] eth1: link up (1000Mbps/Full duplex)
- [ 44.708340] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 44.748681] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=e th1.2, add ingress hook
- [ 45.391548] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 46.687749] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=wlan0
- [ 48.670176] ath: EEPROM regdomain: 0x8024
- [ 48.674280] ath: EEPROM indicates we should expect a country code
- [ 48.680473] ath: doing EEPROM country->regdmn map search
- [ 48.685867] ath: country maps to regdmn code: 0x3b
- [ 48.690734] ath: Country alpha2 being used: AU
- [ 48.695247] ath: Regpair used: 0x3b
- [ 48.698796] ath: regdomain 0x8024 dynamically updated by user
- [ 51.409173] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=w lan1-1, add ingress hook
- [ 51.537572] br-lan: port 2(wlan1-1) entered blocking state
- [ 51.543186] br-lan: port 2(wlan1-1) entered disabled state
- [ 51.549053] device wlan1-1 entered promiscuous mode
- [ 51.830790] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
- [ 51.837616] br-lan: port 2(wlan1-1) entered blocking state
- [ 51.843210] br-lan: port 2(wlan1-1) entered forwarding state
- [ 53.550904] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=w lan1, add ingress hook
- [ 54.575733] br-lan: port 2(wlan1-1) entered disabled state
- [ 55.354660] wlan1: authenticate with d0:76:e7:cf:eb:bc
- [ 55.387237] wlan1: send auth to d0:76:e7:cf:eb:bc (try 1/3)
- [ 55.436628] wlan1: authenticated
- [ 55.647559] wlan1: associate with d0:76:e7:cf:eb:bc (try 1/3)
- [ 55.680500] wlan1: RX AssocResp from d0:76:e7:cf:eb:bc (capab=0x1411 status=0 aid=5)
- [ 55.688583] wlan1: associated
- [ 55.691748] wlan1: Limiting TX power to 20 (20 - 0) dBm as advertised by d0:7 6:e7:cf:eb:bc
- [ 56.361398] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 56.673557] br-lan: port 2(wlan1-1) entered blocking state
- [ 56.679179] br-lan: port 2(wlan1-1) entered forwarding state
- [ 1647.431196] device wlan1-1 left promiscuous mode
- [ 1647.436068] br-lan: port 2(wlan1-1) entered disabled state
- [ 1647.500181] warning: catch unregister event for dev=wlan1-1
- [ 1647.505885] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=wlan1-1
- [ 1647.581794] wlan1: deauthenticating from d0:76:e7:cf:eb:bc by local choice (R eason: 3=DEAUTH_LEAVING)
- [ 1648.184580] warning: catch unregister event for dev=wlan1
- [ 1648.190113] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=wlan1
- [ 1650.237532] ath: EEPROM regdomain: 0x809c
- [ 1650.241642] ath: EEPROM indicates we should expect a country code
- [ 1650.247834] ath: doing EEPROM country->regdmn map search
- [ 1650.253230] ath: country maps to regdmn code: 0x52
- [ 1650.258096] ath: Country alpha2 being used: CN
- [ 1650.262609] ath: Regpair used: 0x52
- [ 1650.266158] ath: regdomain 0x809c dynamically updated by user
- [ 1651.995246] warning: (zone_netdev_event:346)dev=wlan1-1 set zone=127 type=0
- [ 1652.002355] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=w lan1-1, add ingress hook
- [ 1652.091495] br-lan: port 2(wlan1-1) entered blocking state
- [ 1652.097210] br-lan: port 2(wlan1-1) entered disabled state
- [ 1652.103106] device wlan1-1 entered promiscuous mode
- [ 1652.199337] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
- [ 1652.206173] br-lan: port 2(wlan1-1) entered blocking state
- [ 1652.211775] br-lan: port 2(wlan1-1) entered forwarding state
- [ 1653.425878] warning: (zone_netdev_event:346)dev=wlan1 set zone=127 type=0
- [ 1653.432821] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=w lan1, add ingress hook
- [ 1654.452888] br-lan: port 2(wlan1-1) entered disabled state
- [ 1655.605377] wlan1: authenticate with d0:76:e7:cf:eb:bc
- [ 1655.637161] wlan1: send auth to d0:76:e7:cf:eb:bc (try 1/3)
- [ 1655.644788] wlan1: authenticated
- [ 1655.652861] wlan1: associate with d0:76:e7:cf:eb:bc (try 1/3)
- [ 1655.662993] wlan1: RX AssocResp from d0:76:e7:cf:eb:bc (capab=0x1411 status=0 aid=1)
- [ 1655.671154] wlan1: associated
- [ 1655.684928] wlan1: Limiting TX power to 20 (20 - 0) dBm as advertised by d0:7 6:e7:cf:eb:bc
- [ 1656.400609] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 1656.473735] br-lan: port 2(wlan1-1) entered blocking state
- [ 1656.479344] br-lan: port 2(wlan1-1) entered forwarding state
- [ 3075.034790] device wlan1-1 left promiscuous mode
- [ 3075.039664] br-lan: port 2(wlan1-1) entered disabled state
- [ 3075.076343] warning: catch unregister event for dev=wlan1-1
- [ 3075.082056] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=wlan1-1
- [ 3075.126076] wlan1: deauthenticating from d0:76:e7:cf:eb:bc by local choice (R eason: 3=DEAUTH_LEAVING)
- [ 3075.251440] warning: catch unregister event for dev=wlan1
- [ 3075.257086] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=wlan1
- [ 3078.250118] warning: (zone_netdev_event:346)dev=wlan1-1 set zone=127 type=0
- [ 3078.257307] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=w lan1-1, add ingress hook
- [ 3078.436163] br-lan: port 2(wlan1-1) entered blocking state
- [ 3078.441773] br-lan: port 2(wlan1-1) entered disabled state
- [ 3078.447738] device wlan1-1 entered promiscuous mode
- [ 3078.627150] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
- [ 3078.633984] br-lan: port 2(wlan1-1) entered blocking state
- [ 3078.639579] br-lan: port 2(wlan1-1) entered forwarding state
- [ 3079.824185] warning: (zone_netdev_event:346)dev=wlan1 set zone=127 type=0
- [ 3079.831212] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=w lan1, add ingress hook
- [ 3080.845669] br-lan: port 2(wlan1-1) entered disabled state
- [ 3082.997472] wlan1: authenticate with d0:76:e7:cf:eb:bc
- [ 3083.028941] wlan1: send auth to d0:76:e7:cf:eb:bc (try 1/3)
- [ 3083.036773] wlan1: authenticated
- [ 3083.041640] wlan1: associate with d0:76:e7:cf:eb:bc (try 1/3)
- [ 3083.051660] wlan1: RX AssocResp from d0:76:e7:cf:eb:bc (capab=0x1411 status=0 aid=1)
- [ 3083.059782] wlan1: associated
- [ 3083.137171] wlan1: Limiting TX power to 20 (20 - 0) dBm as advertised by d0:7 6:e7:cf:eb:bc
- [ 3083.401393] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 3083.472983] br-lan: port 2(wlan1-1) entered blocking state
- [ 3083.478591] br-lan: port 2(wlan1-1) entered forwarding state
- [10794.699689] device wlan1-1 left promiscuous mode
- [10794.704550] br-lan: port 2(wlan1-1) entered disabled state
- [10794.741226] warning: catch unregister event for dev=wlan1-1
- [10794.746940] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=wlan1-1
- [10794.788666] wlan1: deauthenticating from d0:76:e7:cf:eb:bc by local choice (R eason: 3=DEAUTH_LEAVING)
- [10794.916405] warning: catch unregister event for dev=wlan1
- [10794.921931] {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event f or dev=wlan1
- [10797.976282] warning: (zone_netdev_event:346)dev=wlan1-1 set zone=127 type=0
- [10797.983474] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=w lan1-1, add ingress hook
- [10798.103761] br-lan: port 2(wlan1-1) entered blocking state
- [10798.109377] br-lan: port 2(wlan1-1) entered disabled state
- [10798.115251] device wlan1-1 entered promiscuous mode
- [10798.289941] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
- [10798.296778] br-lan: port 2(wlan1-1) entered blocking state
- [10798.302375] br-lan: port 2(wlan1-1) entered forwarding state
- [10799.473581] warning: (zone_netdev_event:346)dev=wlan1 set zone=127 type=0
- [10799.480522] {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=w lan1, add ingress hook
- [10800.516097] br-lan: port 2(wlan1-1) entered disabled state
- [10800.639583] wlan1: authenticate with d0:76:e7:cf:eb:bc
- [10800.670910] wlan1: send auth to d0:76:e7:cf:eb:bc (try 1/3)
- [10800.678357] wlan1: authenticated
- [10800.684082] wlan1: associate with d0:76:e7:cf:eb:bc (try 1/3)
- [10800.694175] wlan1: RX AssocResp from d0:76:e7:cf:eb:bc (capab=0x1411 status=0 aid=1)
- [10800.702314] wlan1: associated
- [10800.734104] wlan1: Limiting TX power to 20 (20 - 0) dBm as advertised by d0:7 6:e7:cf:eb:bc
- [10801.515903] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [10801.587530] br-lan: port 2(wlan1-1) entered blocking state
- [10801.593140] br-lan: port 2(wlan1-1) entered forwarding state
- [34727.848013] TCP: request_sock_TCP: Possible SYN flooding on port 5000. Sendin g cookies. Check SNMP counters.
- [36411.741928] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [36411.919898] usb-storage 1-1:1.0: USB Mass Storage device detected
- [36411.938107] scsi host0: usb-storage 1-1:1.0
- [36412.957228] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ : 0 ANSI: 6
- [36412.982681] sd 0:0:0:0: [sda] 30240768 512-byte logical blocks: (15.5 GB/14.4 GiB)
- [36412.999944] sd 0:0:0:0: [sda] Write Protect is off
- [36413.004874] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
- [36413.031716] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA
- [36413.166511] sda: sda1 sda2
- [36413.177413] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [36416.692305] squashfs: Unknown parameter 'iocharset'
- [36416.700017] exFAT-fs (sda2): invalid fs_name
- [36416.704393] exFAT-fs (sda2): failed to read boot sector
- [36416.709725] exFAT-fs (sda2): failed to recognize exfat type
- [36416.723322] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT files ystems, filesystem will be case sensitive!
- [89940.547988] ksmbd: kill command received
- [90889.784323] ksmbd: kill command received
- [90941.846844] ksmbd: kill command received
- [93720.030303] ksmbd: kill command received
- root@X-WRT:~# ^C
- root@X-WRT:~#
复制代码 |
|