找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 7408|回复: 45

品胜静音云路由,WFR101N,TTL跑码

[复制链接]
发表于 2019-6-15 10:07 | 显示全部楼层 |阅读模式
本帖最后由 qfnuzlr 于 2019-6-15 10:23 编辑

Linux version 2.6.31 (root@ubuntu) (gcc version 4.3.3 (GCC) ) #2 Fri Nov 7 17:17:10 CST 2014
flash_size passed from bootloader = 16
arg 1: console=ttyS0,115200
arg 2: root=31:02
arg 3: rootfstype=jffs2
arg 4: init=/sbin/init
arg 5: mtdparts=ath-nor0:64k(u-boot),64k(u-boot-env),14080k(rootfs),2048k(uImage),64k(mib0),64k(ART)
arg 6: mem=64M
CPU revision is: 0001974c (MIPS 74Kc)
ath_sys_frequency: cpu srif ddr srif cpu 535 ddr 400 ahb 200
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:64k(u-boot),64k(u-boot-env),14080k(rootfs),2048k(uImage),64k(mib0),64k(ART) mem=64M
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61936k/65536k available (2029k kernel code, 3524k reserved, 691k data, 140k init, 0k highmem)
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 267.26 BogoMIPS (lpj=534528)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
ATH GPIOC major 0
JFFS2 version 2.2 (ZLIB) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
fuse init (API version 7.12)
msgmni has been set to 121
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
brd: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
6 cmdlinepart partitions found on MTD device ath-nor0
Creating 6 MTD partitions on "ath-nor0":
0x000000000000-0x000000010000 : "u-boot"
0x000000010000-0x000000020000 : "u-boot-env"
0x000000020000-0x000000de0000 : "rootfs"
0x000000de0000-0x000000fe0000 : "uImage"
0x000000fe0000-0x000000ff0000 : "mib0"
0x000000ff0000-0x000001000000 : "ART"
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
u32 classifier
    Performance counters on
    input device check on
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
arch/mips/atheros/gpio.c (ath_simple_config_init) AP_RESET_GPIO: 17
arch/mips/atheros/gpio.c (ath_simple_config_init) JUMPSTART_GPIO: 0
athwdt_init: Registering WDT failed -16
ath_otp_init: Registering OTP success
ath_clksw_init: Registering Clock Switch Interface success
VFS: Mounted root (jffs2 filesystem) readonly on device 31:2.
Freeing unused kernel memory: 140k freed
athrs_gmac: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
ATHR_GMAC: Length per segment 1536
ATHR_GMAC: fifo cfg 3 01f00140
mac:0 Registering S27....
ATHR_GMAC: RX TASKLET - Pkts per Intr:16
ATHR_GMAC: Mac address for unit 0:bfff0000
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   40
ATHR_GMAC: Max rx descriptor count :   128
ATHR_GMAC: Mac capability flags    :   2582
mac:1 Registering S27....
ATHR_GMAC: RX TASKLET - Pkts per Intr:16
ATHR_GMAC: Mac address for unit 1:bfff0006
ATHR_GMAC: Max segments per packet :   1
ATHR_GMAC: Max tx descriptor count :   40
ATHR_GMAC: Max rx descriptor count :   128
ATHR_GMAC: Mac capability flags    :   2D82
athr_gmac_ring_alloc Allocated 640 at 0x83983800
athr_gmac_ring_alloc Allocated 2048 at 0x83980800
WASP ----> S27 PHY MDIO
Setting Drop CRC Errors, Pause Frames and Length Error frames
Setting PHY...
turn off1 gpio4
athr_gmac_ring_alloc Allocated 640 at 0x83983400
athr_gmac_ring_alloc Allocated 2048 at 0x839dc000
WASP ----> S27 PHY MDIO
ATHRS27: resetting s27
ATHRS27: s27 reset done
Setting Drop CRC Errors, Pause Frames and Length Error frames
Setting PHY...
device eth1 entered promiscuous mode
brctl: invalid argument '0' to 'timespec'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Port Status 1c000004
ath-ehci ath-ehci.0: ATH EHCI
ath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1
ehci_reset Intialize USB CONTROLLER in host mode: 13
ehci_reset Port Status 1c000000
ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000
ehci_reset Intialize USB CONTROLLER in host mode: 13
ehci_reset Port Status 1c000000
ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
ip_tables: (C) 2000-2006 Netfilter Core Team
iptables v1.4.5
ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://code.google.com/p/ipt-account/
ATH_GPIO_OUT_FUNCTION3=000f0c0d
111 ATH_GPIO_OUT_FUNCTION3=190f0c0d
2222 ATH_GPIO_OUT_FUNCTION3=190f0c0d
        vol:        0x0
athstats
80211stats
wlanconfig
pktlogconf
pktlogdump
brctl: bridge br0: Invalid argument
turn on port forward
killall: 3g: no process killed
killall: pppd: no process killed
route: SIOCDELRT: No such process
ifconfig: SIOCSIFADDR: No such device
ifconfig: SIOCGIFFLAGS: No such device
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
killall: qos: no process killed
Args: 1
adf: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
insmod: can't read '/lib/modules/2.6.31/net/ath_spectral.ko': No such file or directory
insmod: can't read '/lib/modules/2.6.31/net/ath_dfs.ko': No such file or directory
insmod: can't read '/lib/modules/2.6.31/net/hst_tx99.ko': No such file or directory
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_ahb: 9.5.5.36 (Atheros/multi-bss)
__ath_attach: Set global_scn[0]
ACBKMinfree = 48
ACBEMinfree = 32
ACVIMinfree = 16
ACVOMinfree = 0
CABMinfree = 48
UAPSDMinfree = 0
Enterprise mode: 0x00000000
Restoring Cal data from Flash
ath_get_caps[5914] rx chainmask mismatch actual 3 sc_chainmak 0
ath_get_caps[5889] tx chainmask mismatch actual 3 sc_chainmak 0
ath_tx_paprd_init sc 83bd8000 PAPRD Enabled
SC Callback Registration for wifi0
wifi0: Atheros 9340: mem=0xb8100000, irq=2
insmod: can't read '/lib/modules/2.6.31/net/wlan_me.ko': No such file or directory
wlan_vap_create : enter. devhandle=0x83d202c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
wlan_vap_create : exit. devhandle=0x83d202c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
ath0
wlan_vap_create : enter. devhandle=0x83d202c0, opmode=IEEE80211_M_STA, flags=0x1
wlan_vap_create : exit. devhandle=0x83d202c0, opmode=IEEE80211_M_STA, flags=0x1.
ath1
device ath0 entered promiscuous mode
br0: port 2(ath0) entering learning state
athr_gmac_ring_free Freeing at 0x83983800
athr_gmac_ring_free Freeing at 0x83980800
athr_gmac_ring_alloc Allocated 640 at 0x83983800
athr_gmac_ring_alloc Allocated 2048 at 0x83980800
WASP ----> S27 PHY MDIO
Setting Drop CRC Errors, Pause Frames and Length Error frames
Setting PHY...
turn off1 gpio4
ieee80211_ioctl_siwmode: imr.ifm_active=1442432, new mode=3, valid=1
br0: port 2(ath0) entering disabled state
DEVICE IS DOWN ifname=ath0
DEVICE IS DOWN ifname=ath0
br0: port 2(ath0) entering learning state
internet methed p_internet_method =dynamic
intit dynamic internet access setup_internet_access_method
set_up_dnsmasq_conf...okcheck_lan_ip_modified...okenter into (setup_br0_ip)
popen grep udhcpd.conf sucess
row row 1111111111= (opt    router        192.168.168.1
)
br0 ip is (192.168.168.1)
iniparser: syntax error in /etc/samba/smbweb.conf (1):
-> 锘?global]
opendir /usb/aucbuf:netbios name=PisenRouter
aucCmd:echo netbios name=PisenRouter >> /etc/samba/smb.conf
aucbuf:interfaces=192.168.168.1/24
aucCmd:echo interfaces=192.168.168.1/24 >> /etc/samba/smb.conf
d_name: .
d_name: ..
killall: br0ipflow: no process killed
setup_br0_ip...oksetup_dhcpd...oksetup_acl...oksetup_ftp...oksetup_samba...oksetup_static_arp...okok,clear fialcntclear_login_failcnt...oksetup_flow_statistics...okrestore_lan_ip_modify_flag...ok
air_control_init 0
/opt/svn/svn_up/WFR101N/build/../linux/drivers/anion/air.c (air_control_init) CLEAN_SWITCH: 1
**** drop_caches_sysctl_handler: all done timer added ...****
gmediarender, build : Nov 20 2014 08:49:25
Registering support for 'audio/mpeg'
Registering support for 'audio/x-mpeg'
Registering support for 'audio/ape'
Registering support for 'audio/flac'
Registering support for 'audio/aac'
Registering support for 'audio/mp4a-latm'
Registering support for 'audio/wav'
Registering support for 'audio/x-ms-wma'
60396690ECC9@pisen _raop._tcp 5002
Listening for connections.
net.ipv4.tcp_max_tw_buckets = 5000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_fin_timeout = 30
net.core.netdev_max_backlog = 2048
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_keepalive_time = 120
net.ipv4.tcp_keepalive_probes = 2
net.ipv4.tcp_keepalive_intvl = 2
kernel.hung_task_panic = 1
kernel.softlockup_panic = 1
kernel.panic_on_oops = 1
kernel.panic = 3
vm.panic_on_oom = 1
monitor list: gmediarender player mDNSResponder airplay
=========2===========

pisen mips #2 Fri Nov 7 17:17:10 CST 2014 (none)
pisen login: registering '/upnp/rendertransportSCPD.xml'
registering '/upnp/renderconnmgrSCPD.xml'
registering '/upnp/rendercontrolSCPD.xml'
Ready for rendering..
br0: port 2(ath0) entering forwarding state


从里面找需要的信息吧

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2019-6-15 10:12 | 显示全部楼层
breed 应该是这个breed-ar9341-pisen-wmp002n-r1163.bin
  https://u04608.ctfile.com/fs/4608-382978550
品胜云追剧 WMP002N 专用,波特率 115200,复位键 GPIO#17

点评

品胜云追剧的LeDe的固件有没有做过?  发表于 2019-6-16 22:02
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-6-15 10:35 | 显示全部楼层
telnet默认开启 不知道用户名密码 进不去
ttl也中断不了  难道需要上编程器
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-6-15 13:40 来自手机 | 显示全部楼层
root  ifconfig  

点评

不对,不是ifconfig  详情 回复 发表于 2019-6-15 16:50
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-6-15 16:50 | 显示全部楼层

不对,不是ifconfig

点评

我也有这款米你的设备 确实是root ifconfig 而且我刚刚还特意登陆验证了一下  详情 回复 发表于 2019-6-16 10:36
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-6-15 18:51 | 显示全部楼层
有人玩wpr003n 吗?刷op能不能把里面的声卡用起来
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-6-15 19:52 | 显示全部楼层
https://u04608.ctfile.com/fs/4608-383036736
这是测试过的  WFR101N breed刷入的第三方固件

话说谁有WFR101N 官方固件

点评

官方固件 我有 请问你的TTL 怎么接的  详情 回复 发表于 2019-6-16 07:57
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-6-16 07:57 | 显示全部楼层
qfnuzlr 发表于 2019-6-15 19:52
https://u04608.ctfile.com/fs/4608-383036736
这是测试过的  WFR101N breed刷入的第三方固件

官方固件 我有   请问你的TTL 怎么接的

点评

把官方固件 百度盘 分享一下把 TTL接法是 码率 115200 左边第一个是地 第二个 第三个 一个RX 一个TX 不对就TX RX交换一下,路由器开机后开始乱码不用管 一会就看到启动过程了 好像中断不了 [attachimg]2  详情 回复 发表于 2019-6-16 16:52
官方固件 什么版本的? 1.04 还是1.07  详情 回复 发表于 2019-6-16 11:43
TTL中断不了 我编程器刷的breed  详情 回复 发表于 2019-6-16 11:42
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-6-16 09:21 | 显示全部楼层
我的拆下闪存,用编程器写入也不行,奇怪
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-6-16 10:36 | 显示全部楼层
afeng11 发表于 2019-6-15 16:50
不对,不是ifconfig

我也有这款米你的设备  确实是root ifconfig 而且我刚刚还特意登陆验证了一下

点评

什么意思 telnet 用户名root 密码ifconfig 还是?  详情 回复 发表于 2019-6-16 11:43
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-6-16 11:42 | 显示全部楼层
kochiya 发表于 2019-6-16 07:57
官方固件 我有   请问你的TTL 怎么接的

TTL中断不了 我编程器刷的breed
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-6-16 11:43 | 显示全部楼层
731246304ASdf 发表于 2019-6-16 10:36
我也有这款米你的设备  确实是root ifconfig 而且我刚刚还特意登陆验证了一下

什么意思 telnet 用户名root 密码ifconfig
还是?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-6-16 11:43 | 显示全部楼层
kochiya 发表于 2019-6-16 07:57
官方固件 我有   请问你的TTL 怎么接的

官方固件 什么版本的?
1.04 还是1.07

点评

telnet我已经破解了 1.04貌似  详情 回复 发表于 2019-6-16 15:51
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-6-16 15:51 | 显示全部楼层
qfnuzlr 发表于 2019-6-16 11:43
官方固件 什么版本的?
1.04 还是1.07

telnet我已经破解了 1.04貌似

点评

发一下具体内容如何?  详情 回复 发表于 2019-6-23 10:32
能不能说下破解方法  详情 回复 发表于 2019-6-16 16:10
1.04有没有官方固件  详情 回复 发表于 2019-6-16 16:10
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-6-16 16:10 | 显示全部楼层
kochiya 发表于 2019-6-16 15:51
telnet我已经破解了 1.04貌似

1.04有没有官方固件
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-20 23:20

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表