|
mt7621_phicomm_k2p.dts
我看了此文件,好像里面没有USB相关的信息- /dts-v1/;
- #include "mt7621.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- / {
- compatible = "phicomm,k2p", "mediatek,mt7621-soc";
- model = "Phicomm K2P";
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- };
- chosen {
- bootargs = "console=ttyS0,57600";
- };
- leds {
- compatible = "gpio-leds";
- stat_r {
- label = "k2p:red:status";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- stat_y {
- label = "k2p:yellow:status";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- led_blue: stat_b {
- label = "k2p:blue:status";
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
- };
- keys {
- compatible = "gpio-keys";
- reset {
- label = "reset";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
- };
- &spi0 {
- status = "okay";
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition[url=home.php?mod=space&uid=485662]@50000[/url] {
- label = "permanent_config";
- reg = <0x50000 0x50000>;
- read-only;
- };
- partition@a0000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0xa0000 0xf60000>;
- };
- };
- };
- };
- &pcie {
- status = "okay";
- };
- &pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0>;
- };
- };
- eernet {
- mtd-mac-address = <&factory 0xe000>;
- };
- &pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag";
- ralink,function = "gpio";
- };
- };
- };
复制代码
|
|