求助 (已修复）asus wl-520gc 6灯亮变砖

jjhjeep

wl-520gc除 air灯 不亮 其余灯都亮。
上图：



TTL 信息：CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Apr 16 14:41:05 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
CPU type 0x29029: 240MHz
Total memory: 65536 KBytes

Total memory used by CFE:  0x80400000 - 0x8049A790 (632720)
Initialized Data:          0x80430720 - 0x80432D10 (9712)
BSS Area:                  0x80432D10 - 0x80434790 (6784)
Local Heap:                0x80434790 - 0x80498790 (409600)
Stack Area:                0x80498790 - 0x8049A790 (8192)
Text (code) segment:       0x80400000 - 0x80430720 (198432)
Boot area (physical):      0x0049B000 - 0x004DB000
Relocation Factor:         I:00000000 - D:00000000

Null Rescue Flag.
Loader:raw Filesys:tftp Devnull) File:: Optionsnull)
Loading: TFTP Server.
Failed.
Could not load :: Error
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .... 1671168 bytes read
Entry at 0x80001000
Starting program at 0x80001000
CPU revision is: 00029029
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 16kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (zd@tomatodevp) (gcc version 3.2.3 with Broadcom modifications) #50 Sun Sep 27 23:26:57 CST 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 2 at 240 MHz
Calibrating delay loop... 238.38 BogoMIPS
Memory: 62980k/65536k available (1434k kernel code, 2556k reserved, 112k data, 68k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096
N_HDLC line discipline registered.
PPP Deflate Compression module registered
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Flash device: 0x400000 at 0x1c000000
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00020000 : "pmon"
0x00020000-0x003f0000 : "linux"
0x000cf3fc-0x00390000 : "rootfs"
0x00390000-0x003f0000 : "jffs2"
0x003f0000-0x00400000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (8092 buckets, 4096 max) - 384 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
ipt_tcpseq <Sep 26 2009 23:33:25> loaded
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 68k freed


Hit ENTER for console...

Algorithmics/MIPS FPU Emulator v1.5
No change was necessary.
eth0: No such device
eth2: No such device
eth3: No such device
eth4: No such device
lo: File exists
eth1: No such device
vlan2: No such device



不知哪里有问题。有的时候插电正常（改了4Mflash 64M内存，加了usb接口）。

ewhz

用编程器重新刷CFE吧

chkai1981

我觉得有地方虚焊，重新吹一下芯片试一下。

wuxiafan

TTL 有信息，应该没什么问题

jjhjeep

不知道 CPU 如果有 虚焊， TTL 是否 会有 信息。

jjhjeep

换了原来2M的flash上去正常， DD能启动：
CFE信息：
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Mar 12 15:25:22 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.23.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes

Total memory used by CFE:  0x80400000 - 0x8049A8A0 (632992)
Initialized Data:          0x80430830 - 0x80432E20 (9712)
BSS Area:                  0x80432E20 - 0x804348A0 (6784)
Local Heap:                0x804348A0 - 0x804988A0 (409600)
Stack Area:                0x804988A0 - 0x8049A8A0 (8192)
Text (code) segment:       0x80400000 - 0x80430830 (198704)
Boot area (physical):      0x0049B000 - 0x004DB000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-24-8C-CD-B3-DC, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: TFTP Server.
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3856 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000

看来是CFE的问题，等会重写4Mflash的CFE试试

只要CPU没问题就行。

singyou20

Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
CPU type 0x29029: 240MHz
Total memory: 65536 KBytes

Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.23.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
你内存是多大的？现在换了多大的flash？

jjhjeep

内存换到64M的， 换了原配2M的上去，没去激活64M 只是排除一下是不是 CPU 问题，
结果是 CPU 没问题，现在准备 换到 带jtag 接口的 wap54G 上面 刷一下 CFE  再焊接回去。

jjhjeep

wl-520gc 又起死回生啦！！





所以大家如果像我这样没有编程器，那就找个有jtag接口路由，到它上面去刷固件，
但得仔细小心，像我这次就掉了一焊盘。

singyou20

晕，你把没CFE的8M换上去有球用？

jjhjeep

4M的flash。

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Apr 16 14:41:05 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.130.23.0
CPU type 0x29029: 240MHz
Total memory: 65536 KBytes

Total memory used by CFE:  0x80400000 - 0x8049A790 (632720)
Initialized Data:          0x80430720 - 0x80432D10 (9712)
BSS Area:                  0x80432D10 - 0x80434790 (6784)
Local Heap:                0x80434790 - 0x80498790 (409600)
Stack Area:                0x80498790 - 0x8049A790 (8192)
Text (code) segment:       0x80400000 - 0x80430720 (198432)
Boot area (physical):      0x0049B000 - 0x004DB000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-1D-60-BC-94-33, ipaddr 192.168.2.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: TFTP Server.
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3856 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU ProcId is: 0x00029029, options: 0x0000004d
Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #4256 Wed Nov 25 18:41:16 CET 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 2 at 240 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.88 BogoMIPS
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
PCI: Setting latency timer of device 00:06.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4719
PPPoL2TP kernel driver, V0.13
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x245e37
partition size = 2404352
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00020000 : "cfe"
0x00020000-0x003f0000 : "linux"
0x00125000-0x00370000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x00370000-0x003f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
start service
starting Architecture code for broadcom
Booting device: Asus WL-520GU/GC
loading switch-core
loading switch-robo
boardflags are 0x0750
sh: can't create /proc/switch/eth1/reset: nonexistent directory
sh: can't create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent directory
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
br0: Bad file descriptor
br0: Bad file descriptor
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
vlan1: Setting MAC address to  00 1d 60 bc 94 34.
vlan1: No such process
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
Jan 20 02:50:41 login[703]: root login on 'pts/0'

jjhjeep

开启usb1.0，samba，transmission启动都是正常：root@DD-WRT:~# /jffs/transmission
挂载 /opt ......
挂载swap分区文件......
swapon: can't stat '/mnt/disc0_1/Swapfile': No such file or directory（没设置）
启动 lighttpd ......
Starting web server: lighttpd
启动 samba ......
Starting nmbd:
Starting smbd:
启动 transmission ......
开启防火墙端口 ......
完毕 ......

root@DD-WRT:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
devpts on /proc/bus/usb type usbfs (rw)
/dev/scsi/host0/bus0/target0/lun0/part2 on /mmc type ext3 (rw)
/dev/scsi/host0/bus0/target0/lun0/part1 on /jffs type ext2 (rw)
/dev/scsi/host0/bus0/target0/lun0/part1 on /opt type ext2 (rw)

开启usb2.0后，还是有问题：samba，transmission不能正常启动：
root@DD-WRT:~# /jffs/transmission
挂载 /opt ......
挂载swap分区文件......
swapon: can't stat '/mnt/disc0_1/Swapfile': No such file or directory
启动 lighttpd ......
Starting web server: lighttpd
启动 samba ......
Starting nmbd:
Bus error
Starting smbd:
/opt/etc/init.d/S08samba: line 23: /opt/sbin/smbd: Input/output error
启动 transmission ......
/jffs/transmission: line 23: /opt/bin/transmission-daemon: Input/output error
开启防火墙端口 ......
完毕 ......
root@DD-WRT:~# demsg
-sh: demsg: not found
root@DD-WRT:~# dmesg
CPU ProcId is: 0x00029029, options: 0x0000004d
Linux version 2.4.37 (root@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #7598 Sat Oct 10 04:38:28 CEST 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 2 at 240 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.88 BogoMIPS
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
PPPoL2TP kernel driver, V0.13
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x24fc20
partition size = 2470912
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "cfe"
0x00020000-0x003f0000 : "linux"
0x00104c00-0x00360000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x00360000-0x003f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
USB20H syn01 register : 0xfe00fe
USB20H syn03 register : 0x1
PCI: Setting latency timer of device 00:03.1 to 64
ehci_hcd 00:03.1: PCI device 14e4:471a
ehci_hcd 00:03.1: irq 6, pci mem b8003800
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:03.1: illegal capability!
ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Journalled Block Device driver loaded
hub.c: new USB device 00:03.1-1, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: ST340015  Model: A                 Rev:  0 0
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: del 01:00:5e:00:00:01 mcast address from vlan interface
vlan0: del 01:00:5e:00:00:01 mcast address from master interface
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: del 01:00:5e:00:00:01 mcast address from vlan interface
vlan0: del 01:00:5e:00:00:01 mcast address from master interface
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to  00 1d 60 bc 94 34.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
SQUASHFS error: Can't find a SQUASHFS superblock on sd(8,2)
etherip: Ethernet over IPv4 tunneling driver
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SQUASHFS error: Can't find a SQUASHFS superblock on sd(8,1)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock(31,4)
root@DD-WRT:~#

jjhjeep

root@DD-WRT:~# dmesg
CPU ProcId is: 0x00029029, options: 0x0000004d
Linux version 2.4.37 (root@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #7598 Sat Oct 10 04:38:28 CEST 2009
Setting the PFC to its default value
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 2 at 240 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.88 BogoMIPS
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
PCI: Setting latency timer of device 00:01.0 to 64
PCI: Setting latency timer of device 00:05.0 to 64
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
PPPoL2TP kernel driver, V0.13
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x24fc20
partition size = 2470912
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "cfe"
0x00020000-0x003f0000 : "linux"
0x00104c00-0x00360000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003f0000-0x00400000 : "nvram"
0x00360000-0x003f0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
USB20H syn01 register : 0xfe00fe
USB20H syn03 register : 0x1
PCI: Setting latency timer of device 00:03.1 to 64
ehci_hcd 00:03.1: PCI device 14e4:471a
ehci_hcd 00:03.1: irq 6, pci mem b8003800
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:03.1: illegal capability!
ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Journalled Block Device driver loaded
hub.c: new USB device 00:03.1-1, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: ST340015  Model: A                 Rev:  0 0
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: del 01:00:5e:00:00:01 mcast address from vlan interface
vlan0: del 01:00:5e:00:00:01 mcast address from master interface
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: del 01:00:5e:00:00:01 mcast address from vlan interface
vlan0: del 01:00:5e:00:00:01 mcast address from master interface
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to  00 1d 60 bc 94 34.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_nat_pptp version 1.5 unloaded
ip_conntrack_pptp version 1.9 unloaded
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded

jjhjeep

SQUASHFS error: Can't find a SQUASHFS superblock on sd(8,2)
etherip: Ethernet over IPv4 tunneling driver
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SQUASHFS error: Can't find a SQUASHFS superblock on sd(8,1)
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock(31,4)
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 529998
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530000
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530002
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530004
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530006
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530008
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530010
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530012
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530014
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530016
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530018
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530020
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530022
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 530024
usb.c: USB disconnect on device 00:03.1-1 address 2
Unable to disconnect USB device from the SCSI subsystem
Device 08:01 not ready.
I/O error: dev 08:01, sector 530026
Device 08:01 not ready.
I/O error: dev 08:01, sector 203042
Device 08:01 not ready.
I/O error: dev 08:01, sector 530022
Device 08:01 not ready.
I/O error: dev 08:01, sector 203066
Device 08:01 not ready.
I/O error: dev 08:01, sector 530022
Device 08:01 not ready.
I/O error: dev 08:01, sector 203066
Device 08:01 not ready.
I/O error: dev 08:01, sector 115202
Device 08:01 not ready.
I/O error: dev 08:01, sector 2
EXT2-fs error (device sd(8,1)): ext2_read_inode: unable to read inode block - inode=16263, block=57601
Device 08:01 not ready.
I/O error: dev 08:01, sector 145052
hub.c: new USB device 00:03.1-1, assigned address 3
Unable to connect USB device to the SCSI subsystem
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
I/O error: dev 08:01, sector 540670
I/O error: dev 08:01, sector 104
I/O error: dev 08:01, sector 118
I/O error: dev 08:01, sector 170
I/O error: dev 08:01, sector 220
I/O error: dev 08:01, sector 332
I/O error: dev 08:01, sector 338
I/O error: dev 08:01, sector 344
I/O error: dev 08:01, sector 348
I/O error: dev 08:01, sector 354
I/O error: dev 08:01, sector 372
I/O error: dev 08:01, sector 412
I/O error: dev 08:01, sector 426
I/O error: dev 08:01, sector 115180
I/O error: dev 08:01, sector 115186
I/O error: dev 08:01, sector 115190
I/O error: dev 08:01, sector 115204
I/O error: dev 08:01, sector 131092
I/O error: dev 08:01, sector 131546

Evanlei

思考备用，我的也是砖