Uboot add support for Anshion AS-150 v1 (QCA9531 based)

sag***

Add support for Anshion AS-150 v1 (QCA9531 based)

Model	SoC	FLASH	RAM	U-Boot image	U-Boot env
[Anshion AS-150 v1]	QCA9531	16 MiB	64 MiB DDR2	64 KiB, LZMA	RO

自带web页面刷写fireware、uboot、art

1. ***************************************
   
2. *     U-Boot 1.1.4-0c183583-dirty     *
   
3. *          Build: 2017-06-06          *
   
4. ***************************************
   
5. 
   
6. ** Warning: bad env CRC, using default,
   
7.    use 'saveenv' to save it in FLASH
   
8. 
   
9.   BOARD: Anshion AS-150 $3
   
10.     SOC: QCA953x ver. 2 rev. 0
    
11.     CPU: MIPS 24Kc
    
12.     RAM: 64 MB DDR2 16-bit CL3-4-4-10
    
13.   FLASH: 16 MB Winbond W25Q128
    
14.     MAC: 00:03:7F:09:0B:AD (fixed)
    
15. CLOCKS: CPU/RAM/AHB/SPI/REF
    
16.          650/400/200/ 25/ 25 MHz
    
17. 
    
18. Keep button pressed for at least:
    
19. - 3s for web based recovery
    
20. - 5s for U-Boot console
    
21. - 7s for network console
    
22. 
    
23. 0x0 seconds
    
24. 
    
25. ## Error: button was not pressed long enough!
    
26. Continuing normal boot...
    
27. 
    
28. Hit any key to stop booting:  0
    
29. 
    
30. Booting image from 0x9FE80000...
    
31. 
    
32.    Image name:    MIPS OpenWrt Linux-3.18.36
    
33.    Build date:    2017-05-17 18:44:19 UTC
    
34.    Architecture:  MIPS
    
35.    OS/image type: Linux Kernel
    
36.    Compression:   LZMA
    
37.    Data size:     1.1 MB (1178993 bytes)
    
38.    Load address:  0x80060000
    
39.    Entry point:   0x80060000
    
40. 
    
41.    Header CRC...  OK!
    
42.    Data CRC...    skipped
    
43. 
    
44. Stopping network... OK!
    
45. Uncompressing Kernel... OK!
    
46. Starting kernel...
    

复制代码

7591***

楼主你好，路由器没有TTL接口，请问一下进入页面设置的IP地址是什么

kjg3***

ip地址多少