网上刷了别人的固件,可以自动挂载,但是自己编译的固件,能用fdisk查看到硬盘,用mount手动挂载时,只能以这种格式挂载mount -t ntfs-3g /dev/sda5 /mnt/sda5 ,但是就是不能自动挂载,不知道是哪里出了问题,或者可以怎么设置????查看内核,提示如下:
[ 389.460000] usb 1-1: USB disconnect, device number 3
[ 391.990000] usb 1-1: new full-speed USB device number 4 using ohci-platform
[ 392.060000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 392.520000] usb 1-1: new full-speed USB device number 5 using ohci-platform
[ 392.690000] usb 1-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 392.720000] scsi1 : usb-storage 1-1:1.0
[ 393.720000] scsi 1:0:0:0: Direct-Access WD Elements 10A2 1033 PQ: 0 ANSI: 6
[ 393.770000] sd 1:0:0:0: [sda] Spinning up disk...
[ 394.790000] .ready
[ 394.910000] sd 1:0:0:0: [sda] 976707584 512-byte logical blocks: (500 GB/465 GiB)
[ 394.930000] sd 1:0:0:0: [sda] Write Protect is off
[ 394.930000] sd 1:0:0:0: [sda] Mode Sense: 53 00 10 08
[ 394.950000] sd 1:0:0:0: [sda] No Caching mode page present
[ 394.950000] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 394.990000] sd 1:0:0:0: [sda] No Caching mode page present
[ 395.000000] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 395.090000] sda: sda1 < sda5 sda6 sda7 >
[ 395.130000] sd 1:0:0:0: [sda] No Caching mode page present
[ 395.130000] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 395.140000] sd 1:0:0:0: [sda] Attached SCSI disk
|