找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 4079|回复: 7

NEC WL5400AP 出问题了,请有经验的朋友诊断。

[复制链接]
突然连不上了,Wan和Lan灯闪烁不停,无线灯不亮,以下是启动记录,请有经验的朋友看看,怎样能搞好。
或者谁能维修,谢谢!
AP software 4.1.2.56                    
panic: trapmon detected a fatal error                                    
Rebooting AP...               

ar531x rev 0x00005850 firmware startup...                                         
SDRAM TEST...            
p

ar531x rev 0x00005850 firmware startup...                                         
SDRAM TEST...PASSED                  
4  
3  
2  
1  
0  

auto-booting...               

Attaching to TFFS... done.                          
Loading /fl/apimg1...964096                           
Starting at 0x804846e0...                        

/fl/  - Volume is OK                    
Reading Configuration File "/fl/apcfg".                                       
Configuration file checksum: 4e9d0 is good                                          
Please ch         
Inevatlird tCPaU eacnceoss : 0x80000a06 at phys addr 0x18009818 read size 2                                                                           
!

Data bus error              
Exception Program Counter: 0x8012bda0                                    
Status Register: 0x1000f401                           
Cause Register: 0x1080401c                          
Error address: 0x00000000, Error ID: 0x0000                                          
Task: 0x807ffdf0 "tRootTask"                           
Task tRootTask is dead                     

AP software 4.1.2.56                    
panic: trapmon detected a fatal error                                    

Rebooting AP...               

ar531x rev 0x00005850 firmware startup...                                         
SDRAM TEST...PASSED                  

4  
3  
2  
1  
0  

auto-booting...               
Attaching to TFFS... done.                          
Loading /fl/apimg1...964096                           
Starting at 0x804846e0...                        

/fl/  - Volume is OK                    

Reading Configuration File "/fl/apcfg".                                       
Configuration file checksum: 4e9d0 is good                                          
Please ch         

Inevatlird tCPaU eacnceoss : 0x80000a06 at phys addr 0x18009818 read size 2                                                                           
!

Data bus error              
Exception Program Counter: 0x8012bda0                                    
Status Register: 0x1000f401                           
Cause Register: 0x1080401c                          
Error address: 0x00000000, Error ID: 0x0000                                          
Task: 0x807ffdf0 "tRootTask"                           
Task tRootTask is dead                     

AP software 4.1.2.56                    
panic: trapmon detected a fatal error                                    

Rebooting AP...               

ar531x rev 0x00005850 firmware startup...                                         
SDRAM TEST...PASSED                  

4
3
2
1
0

auto-booting...

Attaching to TFFS... done.
Loading /fl/apimg1...964096
Starting at 0x804846e0...

[ 本帖最后由 glinzx 于 2007-12-16 21:26 编辑 ]
 楼主| | 显示全部楼层

请版主看一下,能不能修?

急!怎么就没人回答呢?

重新贴了一个Log,原先那个看起来不好理解。

[ 本帖最后由 glinzx 于 2007-12-16 21:27 编辑 ]
回复

使用道具 举报

 楼主| | 显示全部楼层

所有命令的结果

[Boot]: ?         
?                     - print this list                                       
@                     - boot (load and go)                                          
p                     - print boot params                                          
c                     - change boot params                                          
e                     - print fatal exception                                             
v                     - print version                                      
B                     - change board data                                          
S                     - show board data                                       
n netif               - print network interface device address                                                               

$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#                                                               
                           tn=targetname s=script o=other                                                         
boot device: tffs=drive,removable     file name: /tffs0/vxWorks               
Boot flags:
   0x02  - load local system symbols
   0x04  - don't autoboot
   0x08  - quick autoboot (no countdown)
   0x20  - disable login security
   0x40  - use bootp to get boot parameters
   0x80  - use tftp to get boot image
   0x100 - use proxy arp
available boot devices:Enhanced Network Devices
ae1 tffs

[Boot]: p         
boot device          : tffs:                           
unit number          : 0                        
processor number     : 0                        
file name            : /fl/apimg1                                 
inet on ethernet (e) : 192.168.0.204:0xffffff00                                               
gateway inet (g)     : 0.0.0.0                              
flags (f)            : 0x0                          
other (o)            : ae                        

[Boot]: S         
name:    p         
magic:   35333131                 
cksum:   2a60            
rev:     4         
major:   1         
minor:   0         
pciid:   0013            
wlan0:   yes ff:ff:ff:ff:ff:ff                              
wlan1:   yes 00:0d:02:47:6b:ab
enet0:   no  ff:ff:ff:ff:ff:ff
enet1:   yes 00:0d:02:47:6b:ab
uart0:   yes
sysled:  yes, gpio 7
factory: yes, gpio 6
serclk:  internal
cpufreq: calculated 180000000 Hz
sysfreq: calculated 45000000 Hz
memcap:  disabled
watchdg: enabled

[Boot]: v
CPU: p
Boot rom version: 0.0.6
Creation date: Jan  9 2004, 17:01:56

[Boot]: c         
'.' = clear field;  '-' = go to previous field;  ^D = quit                                                         
boot device          : tffs:0                             
processor number     : 0                        
host name            :                     
file name            : /fl/apimg1                                 
inet on ethernet (e) : 192.168.0.204:0xffffff00
inet on backplane (b):
host inet (h)        :
gateway inet (g)     : 0.0.0.0
user (u)             :
ftp password (pw) (blank = use rsh):
flags (f)            : 0x0
target name (tn)     :
startup script (s)   :
other (o)            : ae

[Boot]: B         
Update board data (enter to keep, ^D to finish):                                                
name [p]        
HW watchdog [y]               
memcap valid [n]               
wlan0 mac address [ff:ff:ff:ff:ff:ff]:                                      
wlan1 mac address [00:0d:02:47:6b:ab]:                                      
enet0 mac address [ff:ff:ff:ff:ff:ff]:                                      
enet1 mac address [00:0d:02:47:6b:ab]:                                      
major [1]:         
minor [0]:         
pciid [0013]:            
wlan0 enabled [y]:                  
wlan0 5G enabled [y]:                     
wlan0 2G enabled [y]:                     
wlan1 enabled [y]:                  
wlan1 5G enabled [n]:                     
wlan1 2G enabled [n]:                     
enet0 enabled [n]:                  
enet1 enabled [y]:                  
uart0 (console) enabled [y]:                           
sysled enabled [y]                  
sysled gpio [7]               
factory reset enabled [y]                        
factory reset gpio [6]                     

name:    p         
magic:   35333131                 
cksum:   2934            
rev:     4         
major:   1         
minor:   0         
pciid:   0013            
wlan0:   yes ff:ff:ff:ff:ff:ff                              
wlan1:   yes 00:0d:02:47:6b:ab                              
enet0:   no  ff:ff:ff:ff:ff:ff
enet1:   yes 00:0d:02:47:6b:ab
uart0:   yes
sysled:  yes, gpio 7
factory: yes, gpio 6
serclk:  internal
cpufreq: calculated 180000000 Hz
sysfreq: calculated 45000000 Hz
memcap:  disabled
watchdg: enabled
done.  Reboot to activate
回复

使用道具 举报

 楼主| | 显示全部楼层

重启命令时的错误

[Boot]
Rebooting AP...

ar531x rev 0x00005850 firmware startup...
SDRAM TEST...PASSED

0
auto-booting...

Attaching to TFFS... done.
Loading /fl/apimg1...964096
Starting at 0x804846e0...

/fl/  - Volume is OK               
Reading Configuration File "/fl/apcfg".
Configuration file checksum: 4e9d0 is good
Please ch

Inevatlird tCPaU eacnceoss : 0x80000a06 at phys addr 0x18009818 read size 2
!

Data bus error
Exception Program Counter: 0x8012bda0
Status Register: 0x1000f401
Cause Register: 0x1080401c
Error address: 0x00000000, Error ID: 0x0000
Task: 0x807ffdf0 "tRootTask"
Task tRootTask is dead

AP software 4.1.2.56
panic: trapmon detected a fatal error
回复

使用道具 举报

 楼主| | 显示全部楼层
怎么就没人能提供帮助呢?
回复

使用道具 举报

 楼主| | 显示全部楼层
根据Log,系统应该是要启动无线模块了,到底是内存坏了,还是无线模块没供上电能,回去再查查。
回复

使用道具 举报

好像都是这毛病... 这种情况可以重新刷固件么?
回复

使用道具 举报

是坏的固件哦!
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-5-24 13:55

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表