找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 1191|回复: 3

发帖求助?软重启之后MT7615E加载驱动会出错,求大神帮忙谢谢。

[复制链接]
软重启之后MT7615E加载驱动会出错,求大神帮忙谢谢。断电重启的话能正常加载,wifi也正常。不知道哪里的问题。MT7621+MT7612E 2x2(5g)+MT7615E (2.4G),16MB flash w25q128  128M ddr
[   15.546597] bus=0x2, slot = 0x1, irq=0x0
[   15.561682] mt7615e 0000:02:00.0: Firmware is not ready for download    //这里会报错
[   15.574670] mt7615e: probe of 0000:02:00.0 failed with error -5
[   15.606633] bus=0x1, slot = 0x0, irq=0xff
[   15.615038] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   16.285154] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[   16.300873] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   16.311852] mt76x2e 0000:01:00.0: Build: 1
[   16.320004] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   16.354521] mt76x2e 0000:01:00.0: Firmware running!
[   16.366818] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'


下面是详细的内核日志
[    0.000000] Linux version 4.14.160 (heng@ubuntu) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r11816-d5ede68)) #0 SMP Thu Dec 26 22:30:57 2019
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Phicomm K2P
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 805fc5a0, node_mem_map 81003000
[    0.000000]   Normal zone: 288 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
[    0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
[    0.000000] pcpu-alloc: s26064 r8192 d23088 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00044460
[    0.000000] Readback ErrCtl register=00044460
[    0.000000] Memory: 121808K/131072K available (4826K kernel code, 254K rwdata, 1052K rodata, 1280K init, 253K bss, 9264K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 256
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.015499] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.087834] pid_max: default: 32768 minimum: 301
[    0.097201] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.110224] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.126391] Hierarchical SRCU implementation.
[    0.135935] smp: Bringing up secondary CPUs ...
[    0.394458] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.394468] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.394480] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.394621] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.205263] Synchronize counters for CPU 1: done.
[    0.146258] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.146267] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.146275] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.146351] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.326199] Synchronize counters for CPU 2: done.
[    0.265295] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.265303] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.265312] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.265392] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.445759] Synchronize counters for CPU 3: done.
[    0.505372] smp: Brought up 1 node, 4 CPUs
[    0.517795] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.537284] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    0.549835] pinctrl core: initialized pinctrl subsystem
[    0.561547] NET: Registered protocol family 16
[    0.579465] FPU Affinity set after 11720 emulations
[    0.580189] pull PCIe RST: RALINK_RSTCTRL = 0
[    0.889156] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.899221] ***** Xtal 40MHz *****
[    0.905954] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.916161] Port 0 N_FTS = 1b105000
[    0.923059] Port 1 N_FTS = 1b105000
[    0.929985] Port 2 N_FTS = 1b102800
[    2.088664] PCIE2 no card, disable it(RST&CLK)
[    2.097356]  -> 21007f2
[    2.102173] PCIE0 enabled
[    2.107375] PCIE1 enabled
[    2.112553] PCI host bridge /pcie@1e140000 ranges:
[    2.122079]  MEM 0x0000000060000000..0x000000006fffffff
[    2.132439]   IO 0x000000001e160000..0x000000001e16ffff
[    2.142803] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
[    2.166253] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.177581] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.188815] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.201521] PCI host bridge to bus 0000:00
[    2.209533] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.223197] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    2.234936] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    2.248412] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.264199] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    2.264239] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.264252] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
[    2.264316] pci 0000:00:00.0: supports D1
[    2.264325] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.264572] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    2.264599] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.264613] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
[    2.264663] pci 0000:00:01.0: supports D1
[    2.264671] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    2.265099] pci 0000:01:00.0: [14c3:7612] type 00 class 0x028000
[    2.265155] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    2.265200] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.265310] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    2.265530] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.265722] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
[    2.265773] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    2.266073] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    2.266092] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[    2.266158] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    2.279191] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.293000] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.306132] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.319961] pci 0000:00:00.0: BAR 14: assigned [mem 0x60000000-0x600fffff]
[    2.333606] pci 0000:00:00.0: BAR 15: assigned [mem 0x60100000-0x601fffff pref]
[    2.348123] pci 0000:00:01.0: BAR 14: assigned [mem 0x60200000-0x602fffff]
[    2.361778] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[    2.375255] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[    2.388741] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    2.403261] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    2.417595] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.427422] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.440923] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    2.455262] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
[    2.469781] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.479611] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    2.494475] clocksource: Switched to clocksource GIC
[    2.506230] NET: Registered protocol family 2
[    2.515545] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    2.529284] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    2.541884] TCP: Hash tables configured (established 1024 bind 1024)
[    2.554641] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.566138] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.578808] NET: Registered protocol family 1
[    2.587397] PCI: CLS 80 bytes, default 32
[    2.824420] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    2.835961] Crashlog allocated RAM at address 0x3f00000
[    2.846516] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    2.868543] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.880051] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.901444] random: fast init done
[    2.909903] io scheduler noop registered
[    2.917633] io scheduler deadline registered (default)
[    2.928367] BAR0 at slot 0 = 0
[    2.934281] bus=0x0, slot = 0x0
[    2.940866] BAR0 at slot 1 = 0
[    2.946850] bus=0x0, slot = 0x1
[    2.953915] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    2.967785] console [ttyS0] disabled
[    2.974855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    2.992771] console [ttyS0] enabled
[    3.006564] bootconsole [early0] disabled
[    3.024392] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[    3.038752] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[    3.059174] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    3.068623] 5 fixed-partitions partitions found on MTD device spi0.0
[    3.081272] Creating 5 MTD partitions on "spi0.0":
[    3.090828] 0x000000000000-0x000000030000 : "u-boot"
[    3.101913] 0x000000030000-0x000000040000 : "u-boot-env"
[    3.113651] 0x000000040000-0x000000050000 : "factory"
[    3.124940] 0x000000050000-0x0000000a0000 : "permanent_config"
[    3.137715] 0x0000000a0000-0x000001000000 : "firmware"
[    3.149364] 2 uimage-fw partitions found on MTD device firmware
[    3.161203] Creating 2 MTD partitions on "firmware":
[    3.171100] 0x000000000000-0x0000001ef346 : "kernel"
[    3.182200] 0x0000001ef346-0x000000f60000 : "rootfs"
[    3.193175] mtd: device 6 (rootfs) set to be root filesystem
[    3.204621] 1 squashfs-split partitions found on MTD device rootfs
[    3.216954] 0x000000b50000-0x000000f60000 : "rootfs_data"
[    3.229603] libphy: Fixed MDIO Bus: probed
[    3.306526] libphy: mdio: probed
[    4.714820] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    4.727362] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[    4.744172] hdlc: HDLC support module revision 1.22
[    4.756247] NET: Registered protocol family 10
[    4.766701] Segment Routing with IPv6
[    4.774066] NET: Registered protocol family 17
[    4.783029] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.808821] 8021q: 802.1Q VLAN Support v1.8
[    4.819696] hctosys: unable to open rtc device (rtc0)
[    4.838831] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[    4.857335] Freeing unused kernel memory: 1280K
[    4.866385] This architecture does not have kernel memory protection.
[    5.683335] init: Console is alive
[    5.690465] init: - watchdog -
[    6.659559] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
[    7.079179] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    7.166630] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    7.184809] init: - preinit -
[    8.502948] mtk_soc_eth 1e100000.ethernet: PPE started
[    8.559874] random: procd: uninitialized urandom read (4 bytes read)
[   12.882595] jffs2: notice: (454) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 75 of xref (5 dead, 0 orphan) found.
[   12.915511] mount_root: switching to jffs2 overlay
[   13.005092] overlayfs: upper fs does not support tmpfile.
[   13.023727] urandom-seed: Seeding with /etc/urandom.seed
[   13.141895] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[   13.166898] procd: - early -
[   13.172734] procd: - watchdog -
[   13.854615] procd: - watchdog -
[   13.861228] procd: - ubus -
[   13.925446] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.951055] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.964158] random: ubusd: uninitialized urandom read (4 bytes read)
[   13.977742] procd: - init -
[   14.434965] random: crng init done
[   14.441747] random: 5 urandom warning(s) missed due to ratelimiting
[   15.033190] kmodloader: loading kernel modules from /etc/modules.d/*
[   15.051228] tun: Universal TUN/TAP device driver, 1.6
[   15.067988] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.085636] Netfilter messages via NETLINK v0.30.
[   15.097388] ip_set: protocol 6
[   15.134513] Mirror/redirect action on
[   15.150044] u32 classifier
[   15.155588]     input device check on
[   15.162862]     Actions configured
[   15.178567] GACT probability on
[   15.189147] Simple TC action Loaded
[   15.199211] urngd: v1.0.1 started.
[   15.217449] Bridge firewalling registered
[   15.227015] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
[   15.242165] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
[   15.258315] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.275296] MRM The MAC Address Re-Mapper is now in the kernel
[   15.293892] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[   15.376177] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[   15.463067] xt_time: kernel timezone is -0000
[   15.546597] bus=0x2, slot = 0x1, irq=0x0
[   15.561682] mt7615e 0000:02:00.0: Firmware is not ready for download
[   15.574670] mt7615e: probe of 0000:02:00.0 failed with error -5
[   15.606633] bus=0x1, slot = 0x0, irq=0xff
[   15.615038] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   16.285154] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[   16.300873] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   16.311852] mt76x2e 0000:01:00.0: Build: 1
[   16.320004] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   16.354521] mt76x2e 0000:01:00.0: Firmware running!
[   16.366818] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   16.374733] PPP generic driver version 2.4.2
[   16.385586] NET: Registered protocol family 24
[   16.431330] kmodloader: done loading kernel modules from /etc/modules.d/*
[   23.917374] mtk_soc_eth 1e100000.ethernet: PPE started
[   23.933456] br-lan: port 1(eth0.2) entered blocking state
[   23.944343] br-lan: port 1(eth0.2) entered disabled state
[   23.955768] device eth0.2 entered promiscuous mode
[   23.965333] device eth0 entered promiscuous mode
[   23.977884] br-lan: port 1(eth0.2) entered blocking state
[   23.988716] br-lan: port 1(eth0.2) entered forwarding state
[   24.000274] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   24.918051] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   27.499259] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   29.725461] wlan1: authenticate with 04:d4:c4:c6:1b:1c
[   30.527551] wlan1: send auth to 04:d4:c4:c6:1b:1c (try 1/3)
[   30.547154] wlan1: authenticated
[   30.564585] wlan1: associate with 04:d4:c4:c6:1b:1c (try 1/3)
[   30.577314] wlan1: RX AssocResp from 04:d4:c4:c6:1b:1c (capab=0x11 status=0 aid=4)
[   30.592821] wlan1: associated
[   30.610280] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  419.716580] bus=0x2, slot = 0x1, irq=0x18
[  419.729368] mt7615e 0000:02:00.0: Firmware is not ready for download
[  419.742223] mt7615e: probe of 0000:02:00.0 failed with error -5

请千万不要发布任何涉及时事政 治以及涉政涉爆涉恐类的内容,切记!切记!切记! | 恩山无线论坛欢迎您的来访,请互相尊重、友善交流。
 楼主| | 显示全部楼层
正常加载7615驱动时候,这里的提示是这个
[    0.579933] pull PCIe RST: RALINK_RSTCTRL = 0
[    0.888918] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.898987] ***** Xtal 40MHz *****
[    0.905713] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.915922] Port 0 N_FTS = 1b102800    //这里是正常加载时的数据,异常时候是1b105000
[    0.922822] Port 1 N_FTS = 1b102800

[    0.929749] Port 2 N_FTS = 1b102800
[    2.088808] PCIE2 no card, disable it(RST&CLK)
[    2.097505]  -> 21007f2
[    2.102318] PCIE0 enabled
[    2.107521] PCIE1 enabled
[    2.112701] PCI host bridge /pcie@1e140000 ranges:
[    2.122228]  MEM 0x0000000060000000..0x000000006fffffff
[    2.132585]   IO 0x000000001e160000..0x000000001e16ffff

//正常加载驱动
[   15.549932] bus=0x2, slot = 0x1, irq=0x0
[   15.758564] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[   15.758564]
[   16.252988] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
[   16.277437] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
[   23.937593] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   23.951560] bus=0x1, slot = 0x0, irq=0xff
[   23.959879] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   24.682016] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[   24.700339] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   24.711393] mt76x2e 0000:01:00.0: Build: 1
[   24.719550] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   24.746165] mt76x2e 0000:01:00.0: Firmware running!
[   24.758784] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   24.767687] PPP generic driver version 2.4.2
[   24.778388] NET: Registered protocol family 24
请千万不要发布任何涉及时事政 治以及涉政涉爆涉恐类的内容,切记!切记!切记! | 恩山无线论坛欢迎您的来访,请互相尊重、友善交流。
回复

使用道具 举报

 楼主| | 显示全部楼层
大神来帮忙看看啊
请千万不要发布任何涉及时事政 治以及涉政涉爆涉恐类的内容,切记!切记!切记! | 恩山无线论坛欢迎您的来访,请互相尊重、友善交流。
回复

使用道具 举报

来自手机 | 显示全部楼层
https://github.com/openwrt/mt76/issues
去提个issue吧
请千万不要发布任何涉及时事政 治以及涉政涉爆涉恐类的内容,切记!切记!切记! | 恩山无线论坛欢迎您的来访,请互相尊重、友善交流。
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-5-8 07:08

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表