设为首页收藏本站

简体中文 繁體中文 English 日本語 Deutsch 한국 사람 بالعربية TÜRKÇE português คนไทย

🌓 切换到窄版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

搜索
恩山无线论坛»论坛 › 无线设备软件相关板块 › DD-WRT专版 › 求救,WRT160n V1 成砖头了 附 TTL 信息
广告投放联系QQ68610888
返回列表 发新帖
查看: 3916|回复: 8

求救,WRT160n V1 成砖头了 附 TTL 信息

[复制链接]
Bein
发表于 2012-6-23 09:36 | 显示全部楼层 |阅读模式
本帖最后由 Bein 于 2012-6-23 18:15 编辑

wrt160n V1 刷了 K26 dd 成砖头了,   就是开机后电源灯闪烁完了就不亮了,除了无线信号灯很微弱的灯光 就是剩下 ,各个LAN口插入的指示灯亮起 但是没有无线信号. 用TFTP的方法恢复，TFTP上传BIN提示完成，但完了后它还是没有一点反应，也不重起 .这路由器还能修复吗?
wrt1900 v1 v2, wtr1605l什么芯片, wrt160n v2, wt1600说明书, wtr1605l

相关帖子

只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复

使用道具 举报

mmc2288
发表于 2012-6-23 17:22 | 显示全部楼层
帮顶一下，希望高手指点，来思考了。
只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复 支持 反对

使用道具 举报

Bein
 楼主| 发表于 2012-6-23 17:47 | 显示全部楼层
TTL 信息
  1. CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
  2. Build Date: Fri Nov 16 12:35:51 CST 2007 (root@localhost.localdomain)
  3. Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

  5. Initializing Arena
  6. Initializing Devices.

  8. No DPN
  9. This is a Parallel Flash
  10. Boot partition size = 262144(0x40000)
  11. Partition information:
  12. boot    #00   00000000 -> 0003FFFF  (262144)
  13. trx     #01   00040000 -> 0004001B  (28)
  14. os      #02   0004001C -> 007F7FFF  (8093668)
  15. nvram   #03   007F8000 -> 007FFFFF  (32768)
  16. Partition information:
  17. boot    #00   00000000 -> 0003FFFF  (262144)
  18. trx     #01   00040000 -> 007F7FFF  (8093696)
  19. nvram   #02   007F8000 -> 007FFFFF  (32768)
  20. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
  21. et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
  22. CPU type 0x29006: 264MHz
  23. Total memory: 32768 KBytes

  25. Total memory used by CFE:  0x80700000 - 0x807963C0 (615360)
  26. Initialized Data:          0x8072D210 - 0x8072F970 (10080)
  27. BSS Area:                  0x8072F970 - 0x807303C0 (2640)
  28. Local Heap:                0x807303C0 - 0x807943C0 (409600)
  29. Stack Area:                0x807943C0 - 0x807963C0 (8192)
  30. Text (code) segment:       0x80700000 - 0x8072D210 (184848)
  31. Boot area (physical):      0x00797000 - 0x007D7000
  32. Relocation Factor:         I:00000000 - D:00000000

  34. Boot version:  ==> v4.7
  35. The boot is CFE
  36. mac_init(): Find mac [00:1E:E5:39:FF:C1] in location 1
  37. Nothing...
  38. Committing NVRAM...done
  39. Waiting for reset button release...don?Start to blink diag led ...


  42. CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
  43. Build Date: Fri Nov 16 12:35:51 CST 2007 (root@localhost.localdomain)
  44. Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

  46. Initializing Arena
  47. Initializing Devices.

  49. No DPN
  50. This is a Parallel Flash
  51. Boot partition size = 262144(0x40000)
  52. Partition information:
  53. boot    #00   00000000 -> 0003FFFF  (262144)
  54. trx     #01   00040000 -> 0004001B  (28)
  55. os      #02   0004001C -> 007F7FFF  (8093668)
  56. nvram   #03   007F8000 -> 007FFFFF  (32768)
  57. Partition information:
  58. boot    #00   00000000 -> 0003FFFF  (262144)
  59. trx     #01   00040000 -> 007F7FFF  (8093696)
  60. nvram   #02   007F8000 -> 007FFFFF  (32768)
  61. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
  62. et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
  63. CPU type 0x29006: 264MHz
  64. Total memory: 65536 KBytes

  66. Total memory used by CFE:  0x80700000 - 0x807963C0 (615360)
  67. Initialized Data:          0x8072D210 - 0x8072F970 (10080)
  68. BSS Area:                  0x8072F970 - 0x807303C0 (2640)
  69. Local Heap:                0x807303C0 - 0x807943C0 (409600)
  70. Stack Area:                0x807943C0 - 0x807963C0 (8192)
  71. Text (code) segment:       0x80700000 - 0x8072D210 (184848)
  72. Boot area (physical):      0x00797000 - 0x007D7000
  73. Relocation Factor:         I:00000000 - D:00000000

  75. Boot version: v4.7
  76. The boot is CFE
  77. mac_init(): Find mac [00:1E:E5:39:FF:C1] in location 1
  78. Nothing...
  79. CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
  80. Device eth0:  hwaddr 00-1E-E5-39-FF-C1, ipaddr 192.168.1.1, mask 255.255.255.0
  81.         gateway not set, nameserver not set
  82. CMD: [go;]
  83. Check CRC of image1
  84.   Len:     0x79F000     (7991296)       (0xBC040000)
  85.   Offset0: 0x1C         (28)            (0xBC04001C)
  86.   Offset1: 0x9D0        (2512)  (0xBC0409D0)
  87.   Offset2: 0x15E800     (1435648)       (0xBC19E800)
  88.   Header CRC:    0x82AF29F5
  89.   Calculate CRC: 0x82AF29F5
  90. Image 1 is OK
  91. Try to load image 1.
  92. Waiting for 5 seconds to upgrade ...
  93. CMD: [load -raw -addr=0x807963c0 -max=0xf70000 :]
  94. Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
  95. Loading: _tftpd_open(): retries=0/5
  96. _tftpd_open(): retries=1/5
  97. _tftpd_open(): retries=2/5
  98. _tftpd_open(): retries=3/5
  99. _tftpd_open(): retries=4/5
  100. Failed.
  101. Could not load :: Timeout occured
  102. CMD: [boot -raw -z -addr=0x80001000 -max=0xf70000 flash0.os:]
  103. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  104. Loading: .. 3916 bytes read
  105. Entry at 0x80001000
  106. Closing network.
  107. et0: link down
  108. Starting program at 0x80001000
  109. Linux version 2.6.24.111 (root@dd-wrt) (gcc version 4.1.2) #10756 Fri Jun 8 02:09:04 CEST 2012
  110. CPU revision is: 00029006
  111. Setting the PFC to its default value
  112. Determined physical RAM map:
  113. memory: 04000000 @ 00000000 (usable)
  114. Zone PFN ranges:
  115.   Normal          0 ->    16384
  116.   HighMem     16384 ->    16384
  117. Movable zone start PFN for each node
  118. early_node_map[1] active PFN ranges
  119.     0:        0 ->    16384
  120. Built 1 zonelists in Zone order.  Total pages: 16384
  121. Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd
  122. Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
  123. Primary data cache 16kB, 2-way, linesize 16 bytes.
  124. Synthesized TLB refill handler (19 instructions).
  125. Synthesized TLB load handler fastpath (31 instructions).
  126. Synthesized TLB store handler fastpath (31 instructions).
  127. Synthesized TLB modify handler fastpath (30 instructions).
  128. PID hash table entries: 512 (order: 9, 2048 bytes)
  129. CPU: BCM4704 rev 9 at 264 MHz
  130. Using 132.000 MHz high precision timer.
  131. console [ttyS0] enabled
  132. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  133. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  134. Memory: 58660k/65536k available (3522k kernel code, 6812k reserved, 1366k data, 188k init, 0k highmem)
  135. Mount-cache hash table entries: 512
  136. NET: Registered protocol family 16
  137. Generic PHY: Registered new driver
  138. PCI: Initializing host
  139. PCI: Enabling CardBus
  140. PCI: no core
  141. PCI: Fixing up bus 0
  142. PCI/PCIe coreunit 0 is set to bus 1.
  143. PCI: Fixing up bridge
  144. PCI: Fixing up bus 1
  145. NET: Registered protocol family 2
  146. Time: MIPS clocksource has been installed.
  147. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  148. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  149. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  150. TCP: Hash tables configured (established 2048 bind 2048)
  151. TCP reno registered
  152. devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
  153. devfs: boot_options: 0x1
  154. squashfs: version 3.0 (2006/03/15) Phillip Lougher
  155. io scheduler noop registered
  156. io scheduler deadline registered (default)
  157. HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
  158. N_HDLC line discipline registered.
  159. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
复制代码
只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复 支持 反对

使用道具 举报

mmc2288
发表于 2012-6-23 20:33 | 显示全部楼层
楼主你试试用JTAG清一下固件再tftp刷dd看看，好像是刷V24mini gene ric这个版本，只供参考，我也是菜鸟。
只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复 支持 反对

使用道具 举报

Bein
 楼主| 发表于 2012-6-23 20:56 | 显示全部楼层
mmc2288 发表于 2012-6-23 20:33
楼主你试试用JTAG清一下固件再tftp刷dd看看，好像是刷V24mini gene ric这个版本，只供参考，我也是菜鸟。

谢谢！！等JTAG线来的时候试试。
只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复 支持 反对

使用道具 举报

Bein
 楼主| 发表于 2012-6-24 14:32 | 显示全部楼层
TTL tftp刷了官方固件后，电源灯亮了但是闪烁不停，无线灯微亮，没有无线信号。
只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复 支持 反对

使用道具 举报

Bein
 楼主| 发表于 2012-6-24 14:32 | 显示全部楼层
本帖最后由 Bein 于 2012-6-24 14:35 编辑

TTL 信息
  1. CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
  2. Build Date: Fri Nov 16 12:35:51 CST 2007 (root@localhost.localdomain)
  3. Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

  5. Initializing Arena
  6. Initializing Devices.

  8. No DPN
  9. This is a Parallel Flash
  10. Boot partition size = 262144(0x40000)
  11. Partition information:
  12. boot    #00   00000000 -> 0003FFFF  (262144)
  13. trx     #01   00040000 -> 0004001B  (28)
  14. os      #02   0004001C -> 007F7FFF  (8093668)
  15. nvram   #03   007F8000 -> 007FFFFF  (32768)
  16. Partition information:
  17. boot    #00   00000000 -> 0003FFFF  (262144)
  18. trx     #01   00040000 -> 007F7FFF  (8093696)
  19. nvram   #02   007F8000 -> 007FFFFF  (32768)
  20. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
  21. et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
  22. CPU type 0x29006: 264MHz
  23. Total memory: 65536 KBytes

  25. Total memory used by CFE:  0x80700000 - 0x807963C0 (615360)
  26. Initialized Data:          0x8072D210 - 0x8072F970 (10080)
  27. BSS Area:                  0x8072F970 - 0x807303C0 (2640)
  28. Local Heap:                0x807303C0 - 0x807943C0 (409600)
  29. Stack Area:                0x807943C0 - 0x807963C0 (8192)
  30. Text (code) segment:       0x80700000 - 0x8072D210 (184848)
  31. Boot area (physical):      0x00797000 - 0x007D7000
  32. Relocation Factor:         I:00000000 - D:00000000
复制代码


只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复 支持 反对

使用道具 举报

Bein
 楼主| 发表于 2012-6-24 14:33 | 显示全部楼层
  1. Boot version: v4.7
  2. The boot is CFE
  3. mac_init(): Find mac [00:1E:E5:39:FF:C1] in location 1
  4. Nothing...
  5. CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
  6. Device eth0:  hwaddr 00-1E-E5-39-FF-C1, ipaddr 192.168.1.1, mask 255.255.255.0
  7.         gateway not set, nameserver not set
  8. CMD: [go;]
  9. Check CRC of image1
  10.   Len:     0x327000     (3305472)       (0xBC040000)
  11.   Offset0: 0x1C         (28)            (0xBC04001C)
  12.   Offset1: 0x8A4        (2212)  (0xBC0408A4)
  13.   Offset2: 0x83F44      (540484)        (0xBC0C3F44)
  14.   Header CRC:    0x7BD6A2C0
  15.   Calculate CRC: 0x7BD6A2C0
  16. Image 1 is OK
  17. Try to load image 1.
  18. Waiting for 5 seconds to upgrade ...
  19. CMD: [load -raw -addr=0x807963c0 -max=0xf70000 :]
  20. Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
  21. Loading: _tftpd_open(): retries=0/5
  22. _tftpd_open(): retries=1/5
  23. _tftpd_open(): retries=2/5
  24. _tftpd_open(): retries=3/5
  25. _tftpd_open(): retries=4/5
  26. Failed.
  27. Could not load :: Timeout occured
  28. CMD: [boot -raw -z -addr=0x80001000 -max=0xf70000 flash0.os:]
  29. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  30. Loading: .. 3560 bytes read
  31. Entry at 0x80001000
  32. Closing network.
  33. et0: link down
  34. Starting program at 0x80001000
  35. CPU revision is: 00029006
  36. Primary instruction cache 16kb, linesize 16 bytes (2 ways)
  37. Primary data cache 16kb, linesize 16 bytes (2 ways)
  38. Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.2.3 with Broadcom modifications) #13 浜6鏈15 10:10:29 CST 2010
  39. Setting the PFC to its default value
  40. Determined physical RAM map:
  41. memory: 04000000 @ 00000000 (usable)
  42. On node 0 totalpages: 16384
  43. zone(0): 16384 pages.
  44. zone(1): 0 pages.
  45. zone(2): 0 pages.
  46. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
  47. CPU: BCM4704 rev 9 at 264 MHz
  48. Calibrating delay loop... 263.78 BogoMIPS
  49. Memory: 62944k/65536k available (1467k kernel code, 2592k reserved, 108k data, 72k init, 0k highmem)
  50. Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
  51. Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
  52. Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
  53. Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
  54. Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
  55. Checking for 'wait' instruction...  unavailable.
  56. POSIX conformance testing by UNIFIX
  57. PCI: Initializing host
  58. PCI: Enabling CardBus
  59. PCI: Fixing up bus 0
  60. PCI: Fixing up bridge
  61. PCI: Fixing up bus 1
  62. Linux NET4.0 for Linux 2.4
  63. Based upon Swansea University Computer Society NET3.039
  64. Initializing RT netlink socket
  65. Starting kswapd
  66. devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
  67. devfs: boot_options: 0x1
  68. squashfs: version 3.0 (2006/03/15) Phillip Lougher
  69. pty: 256 Unix98 ptys configured
  70. Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  71. ttyS00 at 0xb8000300 (irq = 3) is a 16550A
  72. ttyS01 at 0xb8000400 (irq = 0) is a 16550A
  73. HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
  74. N_HDLC line discipline registered.
  75. Register DIAG LED in /proc/sys/diag_blink.
  76. The DIAG LED GPIO is 1.
  77. PPP generic driver version 2.4.2
  78. Number of erase regions: 2
  79. cfip->P_ID=2
  80. cfip->P_ADR=0x40
  81. cfip->I_ID=0
  82. cfip->I_ADR=0x0
  83. cfip->VccMin=39
  84. cfip->VccMax=54
  85. cfip->VppMin=0
  86. cfip->VppMax=0
  87. cfip->WordWriteTimeoutTyp=4
  88. cfip->BufWriteTimeoutTyp=0
  89. cfip->BlockEraseTimeoutTyp=10
  90. cfip->ChipEraseTimeoutTyp=0
  91. cfip->WordWriteTimeoutMax=5
  92. cfip->BufWriteTimeoutMax=0
  93. cfip->BlockEraseTimeoutMax=4
  94. cfip->ChipEraseTimeoutMax=0
  95. cfip->DevSize=23 (0x800000)
  96. cfip->InterfaceDesc=2
  97. cfip->MaxBufWriteSize=0
  98. cfip->NumEraseRegions=2
  99. Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
  100. Primary Algorithm Table at 0040
  101. Alternative Vendor Command Set: 0000 (None)
  102. No Alternate Algorithm Table
  103. Vcc Minimum: 2.7 V
  104. Vcc Maximum: 3.6 V
  105. No Vpp line
  106. Typical byte/word write timeout: 16 祍
  107. Maximum byte/word write timeout: 512 祍
  108. Full buffer write not supported
  109. Typical block erase timeout: 1024 祍
  110. Maximum block erase timeout: 16384 祍
  111. Chip erase not supported
  112. Device size: 0x800000 bytes (8 MiB)
  113. Flash Device Interface description: 0x0002
  114.   - supports x8 and x16 via BYTE# with asynchronous interface
  115. Max. bytes in buffer write: 0x1
  116. Number of Erase Block Regions: 2
  117.   Erase Region #0: BlockSize 0x2000 bytes, 8 blocks
  118.   Erase Region #1: BlockSize 0x10000 bytes, 127 blocks
  119. cfi_cmdset_0002():
  120.     cfi->cmdset=0
  121.     cfi->interleave=1
  122.     cfi->device_type=2
  123.     cfi->cfi_mode=1
  124.     cfi->addr_unlock1=0
  125.     cfi->addr_unlock2=0
  126.     cfi->fast_prog=1
  127.     cfi->mfr=0
  128.     cfi->id=0
  129.     cfi->numchips=1
  130.     cfi->chipshift=23
  131.     cfi->cfiq->P_ADR=40
  132.     cfi->cfiq->NumEraseRegions=2
  133. Pirmary Extended Table:
  134.     major='0'
  135.     minor='0'
  136.     Address Sensitive Unlock=0
  137.     Erase Subspend=2
  138.     Block Protect=1
  139.     Block Temp Unprotect=1
  140.     Block [Un]Protect Scheme=4
  141.     Simultaneous Operation=96
  142.     Burst Mode=0
  143.     Page Mode=0
  144.     ACC Min=133
  145.     ACC Max=197
  146.     TopBottom=2
  147. Amd/Fujitsu Extended Query Table v0.0 at 0x0040
  148. cfi_cmdset_0002(): cfi->mfr=ec, cfi->id=e2 topbottom=2
  149. cfi_cmdset_0002(): bootloc=2
  150. cfi_cmdset_0002(): Region=0 BlockSize 0x2000 bytes, 8 blocks
  151. cfi_cmdset_0002(): Region=1 BlockSize 0x10000 bytes, 127 blocks
  152. number of CFI chips: 1
  153. Flash device: 0x800000 at 0x1c000000
  154. Physically mapped flash: squashfs filesystem found at block 783
  155. (Not Found Lang Block)off=0xc3f44 off1=0x7a0000 size=0x800000
  156. Creating 5 MTD partitions on "Physically mapped flash":
  157. 0x00000000-0x00040000 : "pmon"
  158. 0x00040000-0x007a0000 : "linux"
  159. 0x000c3f44-0x007a0000 : "rootfs"
  160. mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
  161. 0x007a0000-0x007f0000 : "lang"
  162. 0x007f0000-0x00800000 : "nvram"
  163. sflash: found no supported devices
  164. NET4: Linux TCP/IP 1.0 for NET4.0
  165. IP Protocols: ICMP, UDP, TCP, IGMP
  166. IP: routing cache hash table of 512 buckets, 4Kbytes
  167. TCP: Hash tables configured (established 4096 bind 8192)
  168. Linux IP multicast router 0.06 plus PIM-SM
  169. ip_conntrack version 2.1 (512 buckets, 4096 max) - 368 bytes per conntrack
  170. Register conntrack protocol helper for ESP...
  171. init IP_nat_proto_esp register.
  172. ip_conntrack_rtsp v0.01 loading
  173. ip_conntrack_l2tp: registering helper for port [1701].
  174. Register NAT helper for port [1701] name [l2tp].
  175. ip_nat_rtsp v0.01 loading
  176. ip_tables: (C) 2000-2002 Netfilter core team
  177. ipt_time loading
  178. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  179. NET4: Ethernet Bridge 008 for NET4.0
  180. 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
  181. All bugs added by David S. Miller <davem@redhat.com>
  182. VFS: Mounted root (squashfs filesystem) readonly.
  183. Mounted devfs on /dev
  184. Freeing unused kernel memory: 72k freed
  185. find "lang" in MSQUASHFS error: Can't find a SQUASHFS superblock on mtdblock(31,3)
  186. TD 3 (/dev/mtdblock/3)
  187. ret = -1
  188. www -> /www
  189. mount: Inappropriate ioctl for device
  190. Language Package: EN
  191. modules[0]=et buf=[et ]
  192. modules[1]=ctmisc buf=[et ctmisc ]
  193. modules[2]=wl buf=[et ctmisc wl ]
  194. Needed modules: et ctmisc wl
  195. cmd=[insmod et ](946684801)
  196. Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
  197. cmd=[insmod ctmisc ](946684801)
  198. Using /lib/modules/2.4.20/kernel/drivers/net/ctmisc/ctmisc.o
  199. cmd=[insmod wl ](946684801)
  200. Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
  201. Hit enter to continue...The chipset is BCM4704 + BCM5325F for EWC
  202. ifconfig(): name=[lo] flags=[IFUP] addr=[127.0.0.1] netmask=[255.0.0.0]
  203. route(): cmd=[ADD] name=[lo] ipaddr=[127.0.0.0] netmask=[255.0.0.0] gateway=[0.0.0.0] metric=[0]
  204. cmd=[misc -t get_mac -w 3 ](1)
  205. type = [get_mac]
  206. get_data(): cmd=0x11 count=8 len=18
  207. get_data(): Get MAC count is [2]
  208. get_data(): MAC 0: [00:21:29:71:b4:87

  210.                                       get_data(): MAC 1: [00:1E:E5:39:FF:C1

  212.                                                                             get_data(): done
  213. cmd=[misc -t get_wsc_pin -w 3 ](1)
  214. type = [get_wsc_pin]
  215. get_data(): cmd=0x26 count=8 len=8
  216. get_data(): Get WSC count is [1]
  217. get_data(): WSC 0: [71584010]
  218. get_data(): done
  219. cmd=[misc -t get_sn -w 3 ](1)
  220. type = [get_sn]
  221. get_data(): cmd=0x15 count=8 len=20
  222. get_data(): Get SN count is [1]
  223. get_data(): SN 0: [CSE01H438393]
  224. get_data(): done
  225. cmd=[misc -t get_flash_type -w 1 ](1)
  226. type = [get_flash_type]
  227. get_flash_type(): cmd=0x17 count=0 len=0
  228. Get FLASH TYPE is [UNKNOWN 0xec 0xe2]
  229. cmd=[misc -t get_pa0idxval -w 3 ](1)
  230. type = [get_pa0idxval]
  231. get_data(): cmd=0x28 count=8 len=24
  232. get_data(): Get PA0IDXVAL count is [8]
  233. get_data(): PA0IDXVAL 0: [祆忖]
  234. get_data(): PA0IDXVAL 1: [祆忖]
  235. get_data(): PA0IDXVAL 2: [祆忖]
  236. get_data(): PA0IDXVAL 3: [祆忖]
  237. get_data(): PA0IDXVAL 4: [祆忖]
  238. get_data(): PA0IDXVAL 5: [祆忖]
  239. get_data(): PA0IDXVAL 6: [祆忖]
  240. get_data(): PA0IDXVAL 7: [祆忖]
  241. get_data(): done
  242. cmd=[misc -t get_pa1idxval -w 3 ](1)
  243. type = [get_pa1idxval]
  244. get_data(): cmd=0x2a count=8 len=24
  245. get_data(): Get PA1IDXVAL count is [8]
  246. get_data(): PA1IDXVAL 0: [祆忖]
  247. get_data(): PA1IDXVAL 1: [祆忖]
  248. get_data(): PA1IDXVAL 2: [祆忖]
  249. get_data(): PA1IDXVAL 3: [祆忖]
  250. get_data(): PA1IDXVAL 4: [祆忖]
  251. get_data(): PA1IDXVAL 5: [祆忖]
  252. get_data(): PA1IDXVAL 6: [祆忖]
  253. get_data(): PA1IDXVAL 7: [祆忖]
  254. get_data(): done
  255. idx[祆忖] w0a0[] w1a0[] w2a0[]
  256. Invalid PA0 value
  257. idx[祆忖] w0a1[] w1a1[] w2a1[]
  258. Invalid PA1 value
  259. Restoring defaults...The boot is CFE
  260. @.@Restore Factory QoS DSCP...
复制代码
只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复 支持 反对

使用道具 举报

isS
发表于 2012-12-10 17:00 | 显示全部楼层
如何查看TTL?
只谈技术、莫论政事！(点击见详情) | 恩山无线论坛欢迎您的来访，请互相尊重、友善交流，建议保持一颗平常心看待网友的评论，切勿过度反应。
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-10-1 22:25

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱：js12377 | @jischina.com.cn 举报电话：025-88802724 本站不良内容举报信箱：68610888@qq.com

快速回复 返回顶部 返回列表