E3000 进CFE 进不去.求解

飞翔***

设备接好通电后

Boot version: v4.2
The boot is CFE

mac_init(): Find mac [C0:C1:C0:A1:95:BF] in location 0
Nothing...
country_init(): Find country code in location 0
The country is same
Device eth0:  hwaddr C0-C1-C0-A1-95-BF, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Check CRC of image1
  Header CRC:    0x6B4CE854
  Calculate CRC: 0x6B4CE854
Image 1 is OK
Try to load image 1.
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 5192 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000



按照cat0505 网友的这篇帖子
https://www.right.com.cn/forum/thread-113170-1-1.html


进行到第三步和第四部后

效果是这样的...

Boot version: v4.2
The boot is CFE

mac_init(): Find mac [C0:C1:C0:A1:95:BF] in location 0
Nothing...
country_init(): Find country code in location 0
The country is same
Device eth0:  hwaddr C0-C1-C0-A1-95-BF, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Check CRC of image1
  Header CRC:    0x6B4CE854
  Calculate CRC: 0x6B4CE854
Image 1 is OK
Try to load image 1.
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: .. 3544064 bytes read
Entry at 0x8079dac0
Loader:raw Filesys:memory Dev:eth0 File::0x8079dac0 Optionsnull)
Loading: . 0 bytes read
Failed.
Could not load :0x8079dac0: Error
CFE>

在CFE后面什么都不可以输入....没有任何反应...求破解....