找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 4115|回复: 4

W1800R TTL无法救活 无限重启

[复制链接]
in function loader()
Loader buf 82000000:0x10000917
LZMA Decompressing...inbase :0x9c00ad14, input_len : 0x13df1, outbuf : 0x82000000, bytes_out : 0x6000000
done


CFE version 5.100.138.22 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Feb  1 19:45:16 CST 2013 (root@linux-svzy-cj)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
get flash id : 0x17
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
get flash id : 0x17
get flash id : 0x17
CJ++ robo_reset
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.22
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes

CFE mem:    0x82000000 - 0x82098970 (625008)
Data:       0x8202E790 - 0x820319E0 (12880)
BSS:        0x820319E0 - 0x82032970 (3984)
Heap:       0x82032970 - 0x82096970 (409600)
Stack:      0x82096970 - 0x82098970 (8192)
Text:       0x82000000 - 0x8202E790 (190352)

Device eth0:  hwaddr C8-3A-35-5F-D7-18, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Boot program checksum is invalid
flash0.0: Device not found
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: CJ++ defined LZMA
CJ++ using lzma
.. 3117568 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22.19 (root@asus) (gcc version 4.2.4) #25 Sun Sep 22 22:11:52 CST 2013
CPU revision is: 00019749
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
Zone PFN ranges:
  Normal          0 ->    32767
  HighMem     32767 ->    32767
early_node_map[1] active PFN ranges
    0:        0 ->    32767
Built 1 zonelists.  Total pages: 32767
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5300 rev 1 pkg 0 at 600 MHz
Using 300.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126264k/131068k available (2459k kernel code, 4668k reserved, 389k data, 196k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Initializing host
PCI: Reset RC
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI/PCIe coreunit 0 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
PCI/PCIe coreunit 1 is set to bus 2.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
PCI: Fixing up bus 2
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000400 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.18.3
PPTP driver version 0.8.5
pflash: found no supported devices
Creating 5 MTD partitions on "sflash":
0x00000000-0x00020000 : "pmon"
0x00020000-0x00ff0000 : "linux"
0x001321e0-0x00fc0000 : "rootfs"
0x00ff0000-0x01000000 : "nvram"
0x00fc0000-0x00ff0000 : "jffs2"
dev_nvram_init: _nvram_init
_nvram_init: allocat size= 65536
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
u32 classifier
    OLD policer on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://www.barbara.eu.org/~quaker/ipt_account/
net/ipv4/netfilter/tomato_ct.c [Sep 22 2013 08:04:41]
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
SQUASHFS error: sb_bread failed reading block 0x3a06
SQUASHFS error: Unable to read cache block [e819d7:6b8]
SQUASHFS error: Unable to read inode [e819d7:6b8]
CPU 0 Unable to handle kernel paging request at virtual address 001e3540, epc == 8006d304, ra == 800bf9f4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 fffffffc
$ 4   : 001e3540 81000000 00000000 3b9aca00
$ 8   : 29b926ff 386d4380 8030bd10 00000000
$12   : 01f00102 802bb4f4 00000000 87f21e84
$16   : 00000040 00000001 8f1aaf6e 81195200
$20   : 00008001 00000000 8119c000 00000000
$24   : ffffffff 8004dfd0
$28   : 8111a000 8111ba90 8111bab0 800bf9f4
Hi    : 00000000
Lo    : ea2c8000
epc   : 8006d304     Not tainted
ra    : 800bf9f4 Status: 11008002    KERNEL EXL
Cause : 00000008
BadVA : 001e3540
PrId  : 00019749
Modules linked in:
Process swapper (pid: 1, threadinfo=8111a000, task=87fe7c00)
Stack : 00000018 81195200 00008001 00000000 00000040 81195000 00000018 800bf9f4
        00000000 8119db80 00000000 00000000 01000018 00000000 00000018 00000000
        00000000 00000003 8111bb7c 8111bbb0 ffffffff 8111bbb0 800e4710 00000000
        00000000 00000001 00000000 00000000 ffffffff 00000000 00000000 00000000
        00000000 00000000 00000000 00000000 00000000 00000000 87f42a8c 87f42a80
        ...
Call Trace:[<800bf9f4>][<800e4710>][<800e4b5c>][<80073678>][<800b3754>][<80073f50>][<8007c968>][<80072c80>][<8007c97c>][<8007c968>][<800bdd34>][<800beb84>][<80073bf8>][<80079bc4>][<8008a454>][<80073cb8>][<80073c98>][<80079bf4>][<80079bc4>][<8008c934>][<8008c918>][<8007c57c>][<8007c55c>][<80079bf4>][<80079bc4>][<80079bf4>][<80079bc4>][<8005068c>][<802e0000>][<8005068c>][<8006e2dc>][<8006e2bc>][<802e0000>][<802e0000>][<80050930>][<8007a35c>][<8008adac>][<802e0000>][<802e0000>][<8008ca34>][<8007d548>][<8008a150>][<802cad48>][<802caf48>][<802cb09c>][<802ca7a8>][<8000a000>][<802ca564>][<80009ff0>]

Code: 00042140  00431024  00442021 <8c820000> 3c030002  34634000  00431024  14430002  00000000
Fatal exception: panic in 5 seconds
Kernel bug detected[#2]:
Cpu 0
$ 0   : 00000000 00000001 00000001 fffffffc
$ 4   : 81023580 81000000 802b8cd8 810235c0
$ 8   : 8112c000 0000012c 00000002 00024000
$12   : fff7ffff 00200200 00100100 8111c380
$16   : 87ffcd94 87ffe480 00000001 87ffe480
$20   : 00024000 80310000 00200200 00100100
$24   : 00000000 8004dfd0
$28   : 8037c000 8037de08 00000002 8006d68c
Hi    : 00000000
Lo    : 00000000
epc   : 8006d5f8     Not tainted
ra    : 8006d68c Status: 11008002    KERNEL EXL
Cause : 00000034
PrId  : 00019749
Modules linked in:
Process events/0 (pid: 4, threadinfo=8037c000, task=87fe7000)
Stack : 730c3202 19336440 7280601f 19810842 87ffcd90 00000002 87ffcd80 802b0000
        80312ca4 00000000 00000000 00000000 00000000 8006d7a8 87ffc980 87ffe7e0
        80312cb0 802b0000 87ffc500 87ffe480 80312cb0 8006d934 00000001 05490020
        87ffd600 80280000 00000000 80261818 87ffd600 80280000 80280000 efffffff
        00000000 80036748 87ffd608 8037dec8 87ffd600 8037dec8 87ffd608 8037dec8
        ...
Call Trace:[<8006d7a8>][<8006d934>][<80261818>][<80036748>][<8003718c>][<80037168>][<800370ac>][<8003b230>][<800370ac>][<8003af7c>][<8003af60>][<8000a000>][<8003af28>][<80009ff0>]

Code: 8c820000  38420080  7c4201c0 <00028036> 8c86001c  8e67004c  8cc30004  8cc20000  ac620000
Fatal exception: panic in 5 seconds
Kernel panic - not syncing: Fatal exception
Rebooting in 3 seconds..Please stand by while rebooting the system...
in function loader()
Loader buf 82000000:0x10000917
LZMA Decompressing...inbase :0x9c00ad14, input_len : 0x13df1, outbuf : 0x82000000, bytes_out : 0x6000000
done


CFE version 5.100.138.22 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Feb  1 19:45:16 CST 2013 (root@linux-svzy-cj)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
get flash id : 0x17
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
get flash id : 0x17
get flash id : 0x17
CJ++ robo_reset
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.22
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes

CFE mem:    0x82000000 - 0x82098970 (625008)
Data:       0x8202E790 - 0x820319E0 (12880)
BSS:        0x820319E0 - 0x82032970 (3984)
Heap:       0x82032970 - 0x82096970 (409600)
Stack:      0x82096970 - 0x82098970 (8192)
Text:       0x82000000 - 0x8202E790 (190352)

Device eth0:  hwaddr C8-3A-35-5F-D7-18, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Boot program checksum is invalid
flash0.0: Device not found
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: CJ++ defined LZMA
CJ++ using lzma
.. 3117568 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22.19 (root@asus) (gcc version 4.2.4) #25 Sun Sep 22 22:11:52 CST 2013
CPU revision is: 00019749
Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
Zone PFN ranges:
  Normal          0 ->    32767
  HighMem     32767 ->    32767
early_node_map[1] active PFN ranges
    0:        0 ->    32767
Built 1 zonelists.  Total pages: 32767
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5300 rev 1 pkg 0 at 600 MHz
Using 300.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126264k/131068k available (2459k kernel code, 4668k reserved, 389k data, 196k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Initializing host
PCI: Reset RC
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI/PCIe coreunit 0 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
PCI/PCIe coreunit 1 is set to bus 2.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
PCI: Fixing up bus 2
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000400 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.18.3
PPTP driver version 0.8.5
pflash: found no supported devices
Creating 5 MTD partitions on "sflash":
0x00000000-0x00020000 : "pmon"
0x00020000-0x00ff0000 : "linux"
0x001321e0-0x00fc0000 : "rootfs"
0x00ff0000-0x01000000 : "nvram"
0x00fc0000-0x00ff0000 : "jffs2"
dev_nvram_init: _nvram_init
_nvram_init: allocat size= 65536
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
u32 classifier
    OLD policer on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://www.barbara.eu.org/~quaker/ipt_account/
net/ipv4/netfilter/tomato_ct.c [Sep 22 2013 08:04:41]
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
SQUASHFS error: sb_bread failed reading block 0x3a06
SQUASHFS error: Unable to read cache block [e819d7:6b8]
SQUASHFS error: Unable to read inode [e819d7:6b8]
CPU 0 Unable to handle kernel paging request at virtual address 001e3540, epc == 8006d304, ra == 800bf9f4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 fffffffc
$ 4   : 001e3540 81000000 00000000 3b9aca00
$ 8   : 29b926ff 386d4380 8030bd10 00000000
$12   : 01f00102 802bb4f4 00000000 87f21e84
$16   : 00000040 00000001 8f1aaf6e 81195200
$20   : 00008001 00000000 8119c000 00000000
$24   : ffffffff 8004dfd0
$28   : 8111a000 8111ba90 8111bab0 800bf9f4
Hi    : 00000000
Lo    : ea2c8000
epc   : 8006d304     Not tainted
ra    : 800bf9f4 Status: 11008002    KERNEL EXL
Cause : 00000008
BadVA : 001e3540
PrId  : 00019749
Modules linked in:
Process swapper (pid: 1, threadinfo=8111a000, task=87fe7c00)
Stack : 00000018 81195200 00008001 00000000 00000040 81195000 00000018 800bf9f4
        00000000 8119db80 00000000 00000000 01000018 00000000 00000018 00000000
        00000000 00000003 8111bb7c 8111bbb0 ffffffff 8111bbb0 800e4710 00000000
        00000000 00000001 00000000 00000000 ffffffff 00000000 00000000 00000000
        00000000 00000000 00000000 00000000 00000000 00000000 87f42a8c 87f42a80
        ...
Call Trace:[<800bf9f4>][<800e4710>][<800e4b5c>][<80073678>][<800b3754>][<80073f50>][<8007c968>][<80072c80>][<8007c97c>][<8007c968>][<800bdd34>][<800beb84>][<80073bf8>][<80079bc4>][<8008a454>][<80073cb8>][<80073c98>][<80079bf4>][<80079bc4>][<8008c934>][<8008c918>][<8007c57c>][<8007c55c>][<80079bf4>][<80079bc4>][<80079bf4>][<80079bc4>][<8005068c>][<802e0000>][<8005068c>][<8006e2dc>][<8006e2bc>][<802e0000>][<802e0000>][<80050930>][<8007a35c>][<8008adac>][<802e0000>][<802e0000>][<8008ca34>][<8007d548>][<8008a150>][<802cad48>][<802caf48>][<802cb09c>][<802ca7a8>][<8000a000>][<802ca564>][<80009ff0>]

Code: 00042140  00431024  00442021 <8c820000> 3c030002  34634000  00431024  14430002  00000000
Fatal exception: panic in 5 seconds


 楼主| | 显示全部楼层
大约10秒就重启一次~!

从bwq51 8 大 的0805- AC 66 U专用升 0922 w1800R 专用

Ctrl+C无反应
回复

使用道具 举报

 楼主| | 显示全部楼层
已解决
回复

使用道具 举报


同样情况 请问怎么解决的?
回复

使用道具 举报

 楼主| | 显示全部楼层
星诺 发表于 2013-9-27 11:58
同样情况 请问怎么解决的?

TTL链接(打开Putty链接),网线链接,长ping路由,通电,长按Ctrl+C直到出现CFE

打开浏览器刷W1800R原版固件

等待大约10分钟,期间不关闭Putty,等Putty出现启动信息后,ping回返回正常信息,这时可以登录管理界面,直接在界面升级0922固件即可
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-5-21 08:20

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表