求分析 TTL信息

2322620

没有出现 Autobooting in 1 seconds  不知道怎么中断进去界面























SecureCRT - Version 6.5.0 (build 380)
[SERIAL-TRACE] : Starting I/O thread 5992
[SERIAL-TRACE] : Open serial port[\\.\COM3] ==> Handle[1096]
[SERIAL-TRACE] : SERIAL-CONFIG: BAUD-RATE=115200
[SERIAL-TRACE] : SERIAL-CONFIG: PARITY=none
[SERIAL-TRACE] : SERIAL-CONFIG: STOP-BITS=1
[SERIAL-TRACE] : SERIAL-CONFIG: DATA-BITS=8
[SERIAL-TRACE] : SERIAL-CONFIG: DSR-OUTPUT-FLOW-HONORED=no
[SERIAL-TRACE] : SERIAL-CONFIG: DTR-CONTROL=enable/high/on
[SERIAL-TRACE] : SERIAL-CONFIG: CTS-OUTPUT-FLOW-HONORED=no
[SERIAL-TRACE] : SERIAL-CONFIG: RTS-CONTROL=enable/high/on
[SERIAL-TRACE] : Duplicate handle[1096] --> New handle[1048]
[SERIAL-TRACE] : Comm State [CTS-ON]
[SERIAL-TRACE] : Comm State [DSR-ON]
[SERIAL-TRACE] : Comm State [RING-ON]
[SERIAL-TRACE] : Comm State [RLSD-ON]
[SERIAL-TRACE] : Close Handle[1096]


U-Boot 1.1.4 (Build from LSDK- at Mar 21 2013 - 10:06:47)

ap143 - Honey Bee 1.1

DRAM:   8 MB
Top of RAM usable for U-Boot at: 80800000
Reserving 128k for U-Boot at: 807dc000
Reserving 132k for malloc() at: 807bb000
Reserving 44 Bytes for Board Info at: 807bafd4
Reserving 36 Bytes for Global Data at: 807bafb0
Reserving 128k for boot params() at: 8079afb0
Stack Pointer at: 8079af98
Now running in RAM - U-Boot at: 807dc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x14
flash size 4MB, sector count = 256
Flash:  1 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ath_gmac_enet_initialize...
ath_gmac_enet_initialize: reset mask:c02200
Scorpion ---->S27 PHY*
S27 reg init
: cfg1 0x800c0000 cfg2 0x7114
eth0: a8:15:4d:8e:3b:40
athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10
eth0 up
Honey Bee ---->  MAC 1 S27 PHY *
S27 reg init
ATHRS27: resetting s27
ATHRS27: s27 reset done
: cfg1 0x800c0000 cfg2 0x7214
eth1: a8:15:4d:8e:3b:41
athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10
athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10
athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10
athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10
eth1 up
eth0, eth1
Setting 0x181162c0 to 0x4b97a100
Hit any key to stop autoboot:  0
vxWorks.bin from =0x4eec0, len=0x850d2
Uncompressing...done
                                    Attaching interface lo0... done
Rx clbufs 768 each of size 1660
ATHRS27: resetting s27
ATHRS27: s27 reset done
ATHRS27ort status register read 2:7E
ATHRS27:S27 ATHR_PHY_FUNC_CONTROL (0):862
ATHRS27:S27 ATHR_PHY_ID1  (0) :4d
ATHRS27:S27 ATHR_PHY_SPEC_STATUS  (0) :10
ATHRS27:S27 ATHR_PHY_STATUS  (0) :7949
ATHRS27:S27 ATHR_PHY_FUNC_CONTROL (1):862
ATHRS27:S27 ATHR_PHY_ID1  (1) :4d
ATHRS27:S27 ATHR_PHY_SPEC_STATUS  (1) :10
ATHRS27:S27 ATHR_PHY_STATUS  (1) :7949
ATHRS27:S27 ATHR_PHY_FUNC_CONTROL (2):862
ATHRS27:S27 ATHR_PHY_ID1  (2) :4d
ATHRS27:S27 ATHR_PHY_SPEC_STATUS  (2) :10
ATHRS27:S27 ATHR_PHY_STATUS  (2) :7949
ATHRS27:S27 ATHR_PHY_FUNC_CONTROL (3):862
ATHRS27:S27 ATHR_PHY_ID1  (3) :4d
ATHRS27:S27 ATHR_PHY_SPEC_STATUS  (3) :10
ATHRS27:S27 ATHR_PHY_STATUS  (3) :7949
ATHRS27:S27 CPU_PORT_REGISTER :f0
ATHRS27:S27 PORT_STATUS_REGISTER0  :fe
ATHRS27:S27 PORT_STATUS_REGISTER1  :1280
ATHRS27:S27 PORT_STATUS_REGISTER2  :1280
ATHRS27:S27 PORT_STATUS_REGISTER3  :1280
ATHRS27:S27 PORT_STATUS_REGISTER4  :1280
ATHRS27:S27 PORT_CONTROL_REGISTER0 :4004
ATHRS27:S27 PORT_CONTROL_REGISTER1 :4004
ATHRS27:S27 PORT_CONTROL_REGISTER2 :4004
ATHRS27:S27 PORT_CONTROL_REGISTER3 :4004
ATHRS27:S27 PORT_CONTROL_REGISTER4 :4004
Setting Drop CRC Errors, Pause Frames and Length Error frames
Setting PHY...
ATHRS27:athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000
ATHRS27:athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10
ATHRS27:athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000
ATHRS27:athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10
ATHRS27:athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000
ATHRS27:athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10
ATHRS27:athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000
ATHRS27:athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10
ae1 Verify MAC address 403B8E4D 15A80000
  sb = A8 15 4D 8E 3B 40
ATHRS27:ATHRS27:OPERATIONAL_MODE_REG0:40
ATHRS27:ATHRS27:REG 0x4-->:40
ATHRS27:ATHRS27:REG 0x2c-->:fe7f007f
ATHRS27:ATHRS27:REG 0x8-->:10000000
Setting Drop CRC Errors, Pause Frames and Length Error frames
Setting PHY...
ATHRS27:athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000
ATHRS27:athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10
ae0 Verify MAC address 413B8E4D 15A80000
  sb = A8 15 4D 8E 3B 41