今天遇到一个BHU的UBOOT，大家看看怎么刷机

峰升***

U-Boot 1.1.4 (Apr  3 2013 - 14:18:20)

U-boot BXO2000n-2S
DRAM:
sri
Wasp 1.1
wasp_ddr_initial_config(276): Wasp (16bit) ddr1 init
wasp_ddr_initial_config(426): Wasp ddr init done
Tap value selected = 0xf [0x0 - 0x1f]
Setting 0xb8116290 to 0x30602d0f
64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 240k for U-Boot at: 83fc0000
Reserving 192k for malloc() at: 83f90000
Reserving 44 Bytes for Board Info at: 83f8ffd4
Reserving 36 Bytes for Global Data at: 83f8ffb0
Reserving 128k for boot params() at: 83f6ffb0
Stack Pointer at: 83f6ff98
Now running in RAM - U-Boot at: 83fc0000
Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x17
flash size 8MB, sector count = 128
Flash:  8 MB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial

______  _     _ _     _
|_____] |_____| |     |
|_____] |     | |_____| Networks Co'Ltd Inc.

Net:   ag934x_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
wasp  reset mask:c03300
WASP ----> S27 PHY
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
s27 reg init
athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10
eth0 up
WASP ----> S27 PHY
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
s27 reg init lan
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10
athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10
athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10
athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10
eth1 up
eth0, eth1
Hit any key to stop autoboot:  0

##################################
#   BHU Device bootloader menu   #
##################################
[1(t)] Upgrade firmware with tftp
[2(h)] Upgrade firmware with httpd
[3(a)] Config device and server IP Address
[4(i)] Print device infomation
[5(d)] Device test
[6(l)] License manager
[0(r)] Reboot device
Please input cmd key:

andy***

[1(t)] Upgrade firmware with tftp   通过tftp升级
[2(h)] Upgrade firmware with httpd  通过网页升级，这个好用一点，不同TTL
[3(a)] Config device and server IP Address  设置设备和服务器ip，意思你用网线升级时需要设置一下
[4(i)] Print device infomation   打印设备参数信息，看看IP，启动参数等

峰升***

andy_wsj 发表于 2014-9-15 12:10
[1(t)] Upgrade firmware with tftp   通过tftp升级
[2(h)] Upgrade firmware with httpd  通过网页升级 ...

这些倒是明白，就是不知道怎么更新UBOOT呢，还有就是没有合适的固件资源。你有相关资源吗?

online***

百米生活。。。。。。之前我发过，搞不定


https://www.right.com.cn/forum/thread-147122-1-1.html

唯美***

[2(h)] Upgrade firmware with httpd
试试这个
然后电脑固定IP
打开浏览器看能不能上传上去
就怕带校验的~

online***

唯美的风景 发表于 2014-9-16 23:25
[2(h)] Upgrade firmware with httpd
试试这个
然后电脑固定IP

[1(t)] Upgrade firmware with tftp
[2(h)] Upgrade firmware with httpd
都能上传，但是还是回到原点

唯美***

onlinelove123 发表于 2014-9-16 23:29
[1(t)] Upgrade firmware with tftp
[2(h)] Upgrade firmware with httpd
都能上传，但是还是回到原点

看来带校验啊
得编程器上了

峰升***

onlinelove123 发表于 2014-9-16 23:18
百米生活。。。。。。之前我发过，搞不定

谢谢了，编程器已经在路上了。

av***

这个UBOOT里不带C，看来没有编程器无解了。用夹子还不能识别，只能拆。

峰升***

avnow 发表于 2019-6-11 21:11
这个UBOOT里不带C，看来没有编程器无解了。用夹子还不能识别，只能拆。

好久没有玩路由器刷机了。但是看到您的回复又想起那段时光，感谢您。