USB/IP在openwrt上部署，实现USB设备网络共享，通吃所有USB设备

15231253570

PandoraBox R2 14.09 怎么设置打印服务    在此先谢啦

mrning

mrning 发表于 2017-5-30 16:16
你好。在win10 Home 64位系统上，提示
>usbip -l
usbip: failed to open usb.ids

http://download.csdn.net/detail/jinpindi/9503667
在这里下载网友修正了的版本，工作正常，谢谢了

火腿

一样能打印不能扫描

fayv

折腾好久了还是不行呢

liukaifeng

怎样怎么处理呀  

oliver_hjf

liukaifeng 发表于 2017-8-14 21:31
怎样怎么处理呀

llinux服务器端先绑定在自己身上，再解绑，像下面这样，我就是这样配置，windows端才能正确的detach设备
usbipd -D
usbip bind -b 1-1.3
usbip --debug attach -r 127.0.0.1 -b 1-1.3
usbip --debug detach -p 0

czj2441

感谢楼主分享

BOLOLBO

jacksonzh

我想联yamaha的midi设备，不知能不能行？

xueyeteng

我用VirtualHere实现了Canon MG2400在Windows 10上的打印扫描功能，现在想用手机连打印机还没有头绪，官网说的对我这个不懂Android 和Linux编程的人来说就是天书啊。有没有高手指点一下啊。

Linux Console Client
The VirtualHere USB Client Console Edition can now run as a console only daemon in most Linux editions (including Android). It is a 100% static binary therefore it requires no runtime libraries, other than usbip drivers compiled into your Linux setup. usbip drivers are included in the Linux mainline so they are easy to compile with the Linux/Android kernel make command.

The client will interact with the usbip drivers in the Kernel to provide remote USB capabilities.

Running the Linux Client in the console is usually a two step process.

Step 1. Start the Client as a daemon so that it runs in the background using the -n flag. You can move it into an init.d script so it runs on startup as a daemon
Step 2. Run the client again and this time use the -t argument to control the daemon

Note: when running the client as a daemon (step 1) the VirtualHere Server it connects to must be purchased

Notes for Android

You need root to run the VirtualHere Client because it needs access to the kernel sysfs file system
You will need to modprobe vhci-hcd somehow, either by directly compiling the usbip driver into the kernel statically or loading the driver on boot using modprobe.d scripts because the VirtualHere client cannot modprobe this automatically due to SELinux restrictions
There is no "app" to control the Android client. Its easy to write a java app that can open the IPC path to the client. In Android the IPC Path is /data/data/vhclient_ipc to issue commands and /data/data/vhclient_ipc_response to receive responses from the client. In an app, you can also just call Java Runtime.exec() and pass -t argument to run the client and send and receive commands/status

445157718

楼主路由器安装完软件后，usbipd -D回车输入usbip list -l回车没反应，怎么一回事？

445157718

jbcdidgosir 发表于 2015-11-11 12:40
经过测试,发现连接PLC(可编程逻辑控制器)时,会停在USB Device over IP,要求驱动,折腾后,发现只是名字不一样 ...

19.07.7版安装usbip后，查不到usb设备

long1983

最近正在折腾随身WiFi，随身WiFi弄了一个op系统，我想用它共享主路由的网络这个方法好像不会弄啊，

我是让随身WiFi共享主路由的网络不是随身WiFi的4G给op共享网络，

summer021

15.05 bind不了