救命啊。。WRT54G V6变砖了

rive

我是WRT54G V6版本，刷了DD的MICRO版发现下载迅雷速度过快就会导致路由重启。。于是想刷回原版固件。。。
就用TFTP刷了原厂固件。。结果变砖。。电源灯一直闪，可以ping入但是不能打开WEB。。TELNET也无效
重新刷原厂固件也无效。。看了网上很多方法。。还是不行。。始终是电源灯闪。。能ping通。但是其他都没有用
望达人救命

ewhz

最近怎么又多了这么多的砖头啊

tonger

房事回暖，需要很多砖头的

rive

二位

wl1203

这种情况下，可以刷micro

rive

刷过了。。没用的。。我一直就是MICRO的

bg6atks

LS正解

rive

太麻烦了。。还不如直接买个新的

CLS

8M内存刷DD确实没法用bt和迅雷，返回原厂就能正常用bt

刷了dd之后想回原厂tftp就不行了，你可以先用tftp试一下刷回dd的micro版，然后

How to revert back to the original Vxworks based Linksys firmware

Reverting back to VxWorks is now a simple process. I've created a firmware image that does nothing but revert your router back to a VxWorks. This firmware is based on OpenWrt.

Automatic reversion (MAC address and serial # not restored)

For the WRT54G v5, v5.1, and v6 ONLY

Download [http://www.bitsum.com/files/vxworks_revert_v02.zip] and extract.
Download the latest Linksys firmware for your router from http://www.linksys.com.
In the DD-WRT Administration/Firmware? Upgrade tab, select and apply the openwrt-wrt54g_v4-squashfs.bin firmware you extracted in step 1.
DO NOT TOUCH YOUR ROUTER. DO NOT POWER DOWN YOUR ROUTER. IF YOU DO, YOU MAY/WILL BRICK YOUR ROUTER.
After a few minutes (have patience) your router will reboot itself and the VxWorks boot loader's Management Mode will be engaged. You can visit it at http://192.168.1.1. If the browser doesn't respond, WAIT LONGER. Do not power off your router.
In the Management Mode, select and apply the Linksys firmware you downloaded in step 2. DO NOT apply vxworks killer instead, even if you want to go back to linux again right away. You must first apply a Linksys firmware to re-initialize the flash before you can go back to linux.
Power cycle the router after you see 'Success'.

rive

谢楼上的。。我看看先

rive

唉。。刷VxWorks也无用。。还是192.168.1.1无法访问

CLS

用tftp不能刷回dd-micro版吗？

rive

没用，刷了还是一样的。。没反应

glk17

原帖由 rive 于 2009-4-20 16:56 发表
没用，刷了还是一样的。。没反应

tftp能上传进去？显示"Transfer successful"吗？

rive

显示成功了。。但是还是继续没反应。。它也不自己重启