8230 V2 在恩山买的，改8M flash 16*2 DDRAM 刷wrtsl54gsCFE就变砖？(已解决)

kbj***

我在网上找了几个wrtsl54gs的cfe 一刷入，就变砖。TTL上都没有任何信息。但路由没有死的，插上网线会提示连接上，但不会自动分配地址，手动设置IP  192.168.1.5和192.168.2.2 分别PING 192.168.1.1 192.168.2.1 都不通，有没有那位遇到过，帮帮忙。

lalf***

楼主莫不是错刷了128M版本的CFE了？

xiaol***

楼主自己改的8m和32m？

yy5***

去掉路由器主板上的C34贴片电容就可以了。

kbj***

楼主自己改的8m和32m？
xiaolian888 发表于 2009-12-29 19:23

买来就是32M的DDRAM  8M FLASH是我自己改的。

去掉路由器主板上的C34贴片电容就可以了。
yy5409 发表于 2009-12-29 20:27

我看了，买回来时就已经没有c34了，从cpu到c34的连线也已经人为割断了。

yy5***

买来就是32M的SDRAN？8230什么时候换成SDRAM了？我记得是DDR内存啊！！！

kbj***

买来就是32M的SDRAN？8230什么时候换成SDRAM了？我记得是DDR内存啊！！！
yy5409 发表于 2009-12-29 21:36

手误，是DDRAM的。

yy5***

没有C34那就是CFE有问题。你看看这个是否可以？

kbj***

没有C34那就是CFE有问题。你看看这个是否可以？
yy5409 发表于 2009-12-29 21:47

多谢，你发的我刚试了还是老样子，TTL没有一点反映。刷回我原来用的就没问题但我发现我原来用的CFE第一次启动时可以看到识别了2个型号，但启动不起来，最后识别到8230才能真正的启动起来工作，下面是刷回我原来用的CFE（文件在下面附件中，这个CFE可以刷dd-wrt  tomato和DualWanTomato版本）的TTL信息：
Decompressing..........done
Decompressing..........done
Warning! invalid default profile, please update it first.


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Aug 23 09:38:53 CST 2004 (denny@dny_fedora1)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29006: 264MHz
Total memory: 0x2000000 bytes (32MB)

Total memory used by CFE:  0x80300000 - 0x80435910 (1267984)
Initialized Data:          0x8032F9D0 - 0x80331D10 (9024)
BSS Area:                  0x80331D10 - 0x80333910 (7168)
Local Heap:                0x80333910 - 0x80433910 (1048576)
Stack Area:                0x80433910 - 0x80435910 (8192)
Text (code) segment:       0x80300000 - 0x8032F9D0 (195024)
Boot area (physical):      0x00436000 - 0x00476000
Relocation Factor:         I:00000000 - D:00000000

Committing NVRAM...done
Device eth0:  hwaddr 00-18-F8-00-00-01, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3856 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU ProcId is: 0x00029006, options: 0x0000004d

Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #4338 Fri Dec 18 18:35:18 CET 2009

Setting the PFC to its default value

Determined physical RAM map:

memory: 02000000 @ 00000000 (usable)

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200

CPU: BCM4704 rev 8 at 264 MHz

Using 132.000 MHz high precision timer.

Calibrating delay loop... 263.78 BogoMIPS

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

Checking for 'wait' instruction...  unavailable.

POSIX conformance testing by UNIFIX

PCI: Initializing host

PCI: Fixing up bus 0

PCI: Fixing up bridge

PCI: Setting latency timer of device 01:00.0 to 64

PCI: Fixing up bus 1

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

squashfs: version 3.0 (2006/03/15) Phillip Lougher

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0xb8000300 (irq = 3) is a 16550A

ttyS01 at 0xb8000400 (irq = 3) is a 16550A

PCI: Setting latency timer of device 00:01.0 to 64

PCI: Setting latency timer of device 00:02.0 to 64

PCI: Setting latency timer of device 01:01.0 to 64

PCI: Enabling device 01:01.0 (0004 -> 0006)

PPPoL2TP kernel driver, V0.13

Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky

Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0

Amd/Fujitsu Extended Query Table v1.3 at 0x0040

number of CFI chips: 1

cfi_cmdset_0002: Disabling fast programming due to code brokenness.

Flash device: 0x800000 at 0x1c000000

bootloader size: 262144

Physically mapped flash: Filesystem type: squashfs, size=0x4ecd55

partition size = 5224448

Creating 5 MTD partitions on "hysically mapped flash":

0x00000000-0x00040000 : "cfe"

0x00040000-0x007f0000 : "linux"

0x00124800-0x00620000 : "rootfs"

mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only

0x007f0000-0x00800000 : "nvram"

0x00620000-0x007f0000 : "ddwrt"

sflash not supported on this router

Initializing Cryptographic API

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack

ip_tables: (C) 2000-2002 Netfilter core team

ipt_random match loaded

netfilter PSD loaded - (c) astaro AG

ipt_osf: Startng OS fingerprint matching module.

ipt_IPV4OPTSSTRIP loaded

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

All bugs added by David S. Miller <davem@redhat.com>

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

start service
starting Architecture code for broadcom
Booting device: Linksys WRTSL54GS
boardflags are 0x0018
enable Afterburner, boardflags are 0x0218
sh: can't create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent directory
eth2: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth2: Invalid argument
eth2: Invalid argument
br0: Bad file descriptor
device eth0 entered promiscuous mode

br0: Bad file descriptor
eth2: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth2: Invalid argument
eth2: Invalid argument
device eth2 entered promiscuous mode

SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
device eth1 entered promiscuous mode

device eth1 left promiscuous mode

SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
Receiving restore command from resetbutton ...
etherip: Ethernet over IPv4 tunneling driver

erase[0]
ip_conntrack_pptp version 1.9 loaded

ip_nat_pptp version 1.5 loaded

Bad argument `DNAT'
erase[65536]
BCMDOG: WDT device closed unexpectedly.  WDT will not stop!

Restarting system.

Please stand by while rebooting the system...

Decompressing..........done
Warning! invalid run-time nvram, try to recover from default profile.
Warning! invalid default profile, please update it first.
Restore run-time nvram from embedded profile. (Override)


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Aug 23 09:38:53 CST 2004 (denny@dny_fedora1)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29006: 264MHz
Total memory: 0x2000000 bytes (32MB)

Total memory used by CFE:  0x80300000 - 0x80435910 (1267984)
Initialized Data:          0x8032F9D0 - 0x80331D10 (9024)
BSS Area:                  0x80331D10 - 0x80333910 (7168)
Local Heap:                0x80333910 - 0x80433910 (1048576)
Stack Area:                0x80433910 - 0x80435910 (8192)
Text (code) segment:       0x80300000 - 0x8032F9D0 (195024)
Boot area (physical):      0x00436000 - 0x00476000
Relocation Factor:         I:00000000 - D:00000000

Committing NVRAM...doneDecompressing..........done
Warning! invalid default profile, please update it first.


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Aug 23 09:38:53 CST 2004 (denny@dny_fedora1)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29006: 264MHz
Total memory: 0x2000000 bytes (32MB)

Total memory used by CFE:  0x80300000 - 0x80435910 (1267984)
Initialized Data:          0x8032F9D0 - 0x80331D10 (9024)
BSS Area:                  0x80331D10 - 0x80333910 (7168)
Local Heap:                0x80333910 - 0x80433910 (1048576)
Stack Area:                0x80433910 - 0x80435910 (8192)
Text (code) segment:       0x80300000 - 0x8032F9D0 (195024)
Boot area (physical):      0x00436000 - 0x00476000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-90-96-00-00-00, ipaddr 192.168.2.1, mask 255.255.255.0
        gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3856 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU ProcId is: 0x00029006, options: 0x0000004d

kbj***

Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #4338 Fri Dec 18 18:35:18 CET 2009

Setting the PFC to its default value

Determined physical RAM map:

memory: 02000000 @ 00000000 (usable)

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200

CPU: BCM4704 rev 8 at 264 MHz

Using 132.000 MHz high precision timer.

Calibrating delay loop... 263.78 BogoMIPS

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

Checking for 'wait' instruction...  unavailable.

POSIX conformance testing by UNIFIX

PCI: Initializing host

PCI: Fixing up bus 0

PCI: Fixing up bridge

PCI: Setting latency timer of device 01:00.0 to 64

PCI: Fixing up bus 1

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

squashfs: version 3.0 (2006/03/15) Phillip Lougher

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0xb8000300 (irq = 3) is a 16550A

ttyS01 at 0xb8000400 (irq = 3) is a 16550A

PCI: Setting latency timer of device 00:01.0 to 64

PCI: Setting latency timer of device 00:02.0 to 64

PCI: Setting latency timer of device 01:01.0 to 64

PCI: Enabling device 01:01.0 (0004 -> 0006)

PPPoL2TP kernel driver, V0.13
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky

Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0

Amd/Fujitsu Extended Query Table v1.3 at 0x0040

number of CFI chips: 1

cfi_cmdset_0002: Disabling fast programming due to code brokenness.

Flash device: 0x800000 at 0x1c000000

bootloader size: 262144

Physically mapped flash: Filesystem type: squashfs, size=0x4ecd55

partition size = 5224448

Creating 5 MTD partitions on "hysically mapped flash":

0x00000000-0x00040000 : "cfe"

0x00040000-0x007f0000 : "linux"

0x00124800-0x00620000 : "rootfs"

mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only

0x007f0000-0x00800000 : "nvram"

0x00620000-0x007f0000 : "ddwrt"

sflash not supported on this router

Initializing Cryptographic API

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack

ip_tables: (C) 2000-2002 Netfilter core team

ipt_random match loaded

netfilter PSD loaded - (c) astaro AG

ipt_osf: Startng OS fingerprint matching module.

ipt_IPV4OPTSSTRIP loaded

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

All bugs added by David S. Miller <davem@redhat.com>

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

start service
starting Architecture code for broadcom
Booting device: Linksys WRT54G/GL/GS
boardflags are 0x0208
BCMDOG: WDT device closed unexpectedly.  WDT will not stop!

Restarting system.

Please stand by while rebooting the system...

Decompressing..........done
Warning! invalid default profile, please update it first.
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Aug 23 09:38:53 CST 2004 (denny@dny_fedora1)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29006: 264MHz
Total memory: 0x2000000 bytes (32MB)

Total memory used by CFE:  0x80300000 - 0x80435910 (1267984)
Initialized Data:          0x8032F9D0 - 0x80331D10 (9024)
BSS Area:                  0x80331D10 - 0x80333910 (7168)
Local Heap:                0x80333910 - 0x80433910 (1048576)
Stack Area:                0x80433910 - 0x80435910 (8192)
Text (code) segment:       0x80300000 - 0x8032F9D0 (195024)
Boot area (physical):      0x00436000 - 0x00476000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-90-96-00-00-00, ipaddr 192.168.2.1, mask 255.255.255.0
        gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3856 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU ProcId is: 0x00029006, options: 0x0000004d

Linux version 2.4.37 (eko@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #4338 Fri Dec 18 18:35:18 CET 2009

Setting the PFC to its default value

Determined physical RAM map:

memory: 02000000 @ 00000000 (usable)

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200

CPU: BCM4704 rev 8 at 264 MHz

Using 132.000 MHz high precision timer.

Calibrating delay loop... 263.78 BogoMIPS

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

Checking for 'wait' instruction...  unavailable.

POSIX conformance testing by UNIFIX

PCI: Initializing host

PCI: Fixing up bus 0

PCI: Fixing up bridge

PCI: Setting latency timer of device 01:00.0 to 64

PCI: Fixing up bus 1

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

squashfs: version 3.0 (2006/03/15) Phillip Lougher

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0xb8000300 (irq = 3) is a 16550A

ttyS01 at 0xb8000400 (irq = 3) is a 16550A

PCI: Setting latency timer of device 00:01.0 to 64

PCI: Setting latency timer of device 00:02.0 to 64

PCI: Setting latency timer of device 01:01.0 to 64

PCI: Enabling device 01:01.0 (0004 -> 0006)

PPPoL2TP kernel driver, V0.13

Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky

Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0

Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0

Amd/Fujitsu Extended Query Table v1.3 at 0x0040

number of CFI chips: 1

cfi_cmdset_0002: Disabling fast programming due to code brokenness.

Flash device: 0x800000 at 0x1c000000

bootloader size: 262144

Physically mapped flash: Filesystem type: squashfs, size=0x4ecd55

partition size = 5224448

Creating 5 MTD partitions on "hysically mapped flash":

0x00000000-0x00040000 : "cfe"

0x00040000-0x007f0000 : "linux"

0x00124800-0x00620000 : "rootfs"

mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only

0x007f0000-0x00800000 : "nvram"

0x00620000-0x007f0000 : "ddwrt"

sflash not supported on this router

Initializing Cryptographic API

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack

ip_tables: (C) 2000-2002 Netfilter core team

ipt_random match loaded

netfilter PSD loaded - (c) astaro AG

ipt_osf: Startng OS fingerprint matching module.

ipt_IPV4OPTSSTRIP loaded

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

All bugs added by David S. Miller <davem@redhat.com>

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

start service
starting Architecture code for broadcom
Booting device: Belkin board F5D8230
boardflags are 0x0208
sh: can't create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent directory
eth2: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth2: Invalid argument
eth2: Invalid argument
br0: Bad file descriptor
device eth0 entered promiscuous mode

br0: Bad file descriptor
eth2: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth2: Invalid argument
eth2: Invalid argument
device eth2 entered promiscuous mode

SIOCGIFFLAGS: No such device
device eth1 entered promiscuous mode

device eth1 left promiscuous mode

SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
etherip: Ethernet over IPv4 tunneling driver

ip_conntrack_pptp version 1.9 loaded

The Milkfish Router Services
ERROR: Necessary service setting not found: milkfish_username - aborting.
ip_nat_pptp version 1.5 loaded

The Milkfish Router Services
Restoring SIP ddsubscriber database from NVRAM...
Empty.
The Milkfish Router Services
Restoring SIP ddaliases database from NVRAM...
Empty.
^A

附上我原来用的固件（刷这个CFE TTL上信息在上面，从网上下的其他wrtsl54gs的CFE刷就变砖，其他的和在标题描述的一样）

kbj***

问题解决，我把cpu到C34的铜线连接上（这个线买回来就已经被人为割断了）在刷8楼的CFE，就OK了，型号已经是WRTSL54GS。

kbj***

这个是我的机器的图片，应为太大，所以没有上传，下载就可以看了。
http://www.adrive.com/public/a25 ... bf0edea8968717.html

红***

没看到焊接的细节图

kbj***

https://www.right.com.cn/forum/v ... page%3D3&page=1
这个链接中有我发的图和飞线的说明。