|
|
usb需要的那些模块都装了。opkg install fdisk kmod-fs-ext2 kmod-fs-ext3 kmod-fs-vfat kmod-fs-ntfs kmod-fs-nls kmod-usb-core kmod-usb-ohci kmod-usb-storage kmod-usb-storage-extras kmod-usb-uhci kmod-usb2 block-mount
web界面中service也看到usb服务是启动的，但是usb设备就是没加载。看ttl.- _ _ ____ _
- | | | | | __ ) ___ ___ | |_
- | | | |___| _ \ / _ \ / _ \| __|
- | |_| |___| |_) | (_) | (_) | |_
- \___/ |____/ \___/ \___/ \__| ** LOADER **
- ** MARVELL BOARD: RD-88F5181L-VOIP-GE LE
- U-Boot 1.1.1 (Dec 12 2006 - 16:12:22) Marvell version: 1.7.3
- DRAM CS[0] base 0x00000000 size 32MB
- DRAM Total size 32MB
- Flash: mvFlashInit base 0xff800000 devW 1 busW 1
- Flash: flashStructGet manu 0xec id 0xe0
- Flash: flashStructGet flash is supported.
- FLASH: initFlashSecs TOP Sector Type
- Flash: flashSecsInit main sector loop 0 - 127
- [8192kB@ff800000] Flash: 8 MB
- Addresses 20M - 0M are saved for the U-Boot usage.
- Mem malloc Initialization (20M - 16M): Done
- Soc: MV88F5181 Rev 9
- CPU: ARM926 (Rev 0) running @ 500Mhz
- SysClock = 166Mhz , TClock = 166Mhz
- USB 0: host mode
- PCI 0: PCI Express Root Complex Interface
- PCI 1: Conventional PCI, speed = 33000000
- Net: mvEgigaLoad: egiga0 load ok
- egiga0 [PRIME]
- ***************DRIVER INFO*****************
- DRIVER BUILD DATA: Jan 9 2007 at 18:25:44
- DRIVER VERSION 1.06
- *******************************************
- dbSign is:65:52:63:4f:6d:4d
- mac address in flash is:00:18:39:a3:15:50
- have eRcOmM
- Hit ENTER to stop autoboot: 0
- copy kernel from 0xff800000 to 0x400000 with size 0x200000
- ## Booting image at 00400000 ...
- Image Name: Linux-2.6.32.10
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 857236 Bytes = 837.1 kB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- OK
- Starting kernel ...
- Uncompressing Linux...
- Linux version 2.6.32.10 (buildbot@tksite) (gcc version 4.3.3 (GCC) ) #3 Mon Mar 29 05:55:48 CDT 2010
- CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
- CPU: VIVT data cache, VIVT instruction cache
- Machine: Linksys WRT350N v2
- Clearing invalid memory bank 0KB@0xffffffff
- Clearing invalid memory bank 0KB@0xffffffff
- Clearing invalid memory bank 0KB@0xffffffff
- Ignoring unrecognised tag 0x00000000
- Ignoring unrecognised tag 0x00000000
- Ignoring unrecognised tag 0x00000000
- Memory policy: ECC disabled, Data cache writeback
- On node 0 totalpages: 8192
- free_area_init_node: node 0, pgdat c02499f8, node_mem_map c025b000
- Normal zone: 64 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 8128 pages, LIFO batch:0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
- Kernel command line: root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
- PID hash table entries: 128 (order: -3, 512 bytes)
- Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
- Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Memory: 32MB = 32MB total
- Memory: 30076KB available (2148K code, 132K data, 92K init, 0K highmem)
- Hierarchical RCU implementation.
- NR_IRQS:64
- Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976)
- Mount-cache hash table entries: 512
- CPU: Testing write buffer coherency: ok
- NET: Registered protocol family 16
- Orion ID: MV88F5181L-Rev-A1. TCLK=166666667.
- Applying Orion-1/Orion-NAS PCIe config read transaction workaround
- pci 0000:00:00.0: reg 10 64bit mmio pref: [0xf1000000-0xf10fffff]
- pci 0000:00:00.0: reg 18 32bit mmio: [0x000000-0x1ffffff]
- PCI: bus0: Fast back to back transfers disabled
- pci 0000:01:00.0: reg 10 64bit mmio pref: [0x000000-0x1ffffff]
- pci 0000:01:00.0: reg 18 64bit mmio pref: [0x10000000-0x1fffffff]
- pci 0000:01:00.0: reg 20 64bit mmio: [0xf1000000-0xf10fffff]
- pci 0000:01:00.0: reg 30 32bit mmio pref: [0xe0000000-0xe7ffffff]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
- pci 0000:01:00.0: PME# disabled
- pci 0000:01:07.0: reg 10 32bit mmio: [0x40000000-0x4000ffff]
- PCI: bus1: Fast back to back transfers enabled
- bio: create slab <bio-0> at 0
- Switching to clocksource orion_clocksource
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- TCP reno registered
- NET: Registered protocol family 1
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- Registering mini_fo version $Id$
- JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- msgmni has been set to 58
- io scheduler noop registered
- io scheduler deadline registered (default)
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
- console [ttyS0] enabled
- physmap platform flash device: 00800000 at f4000000
- physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
- Amd/Fujitsu Extended Query Table at 0x0040
- physmap-flash.0: Swapping erase regions for broken CFI table.
- number of CFI chips: 1
- cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
- cmdlinepart partition parsing not available
- RedBoot partition parsing not available
- Using physmap partition information
- Creating 7 MTD partitions on "physmap-flash.0":
- 0x000000000000-0x000000100000 : "kernel"
- 0x000000100000-0x000000750000 : "rootfs"
- mtd: partition "rootfs" set to be root filesystem
- mtd: partition "rootfs_data" created automatically, ofs=2F0000, len=460000
- 0x0000002f0000-0x000000750000 : "rootfs_data"
- 0x000000760000-0x0000007a0000 : "lang"
- 0x0000007a0000-0x0000007c0000 : "nvram"
- 0x0000007c0000-0x000000800000 : "u-boot"
- 0x000000750000-0x000000760000 : "eRcOmM_do_not_touch"
- 0x000000000000-0x000000750000 : "image"
- MV-643xx 10/100/1000 ethernet driver version 1.4
- mv643xx_eth smi: probed
- net eth0: port 0 with MAC address 00:00:00:00:51:81
- i2c /dev entries driver
- Registered led device: wrt350nv2:green:power
- Registered led device: wrt350nv2:green:security
- Registered led device: wrt350nv2:orange:power
- Registered led device: wrt350nv2:green:usb
- Registered led device: wrt350nv2:green:wireless
- TCP westwood registered
- NET: Registered protocol family 17
- Distributed Switch Architecture driver version 0.1
- eth0[0]: detected a Marvell 88E6131 switch
- dsa slave smi: probed
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
- Freeing init memory: 92K
- Please be patient, while OpenWrt loads ...
- mini_fo: using base directory: /
- mini_fo: using storage directory: /overlay
- eth0: link up, 1000 Mb/s, full duplex, flow control disabled
- device lan2 entered promiscuous mode
- device eth0 entered promiscuous mode
- device lan1 entered promiscuous mode
- device lan3 entered promiscuous mode
- device lan4 entered promiscuous mode
- Generic kernel compatibility enabled based on linux-next next-20100113
- cfg80211: Calling CRDA to update world regulatory domain
- cfg80211: World regulatory domain updated:
- (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- ath: EEPROM regdomain: 0x37
- ath: EEPROM indicates we should expect a direct regpair map
- ath: Country alpha2 being used: AW
- ath: Regpair used: 0x37
- phy0: Selected rate control algorithm 'ath9k_rate_control'
- Registered led device: ath9k-phy0::radio
- Registered led device: ath9k-phy0::assoc
- Registered led device: ath9k-phy0::tx
- Registered led device: ath9k-phy0::rx
- phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xc2b20000, irq=36
- cfg80211: Calling CRDA for country: AW
- cfg80211: Regulatory domain changed to country: AW
- (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- PPP generic driver version 2.4.2
- ip_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 24
- nf_conntrack version 0.5.0 (471 buckets, 1884 max)
- CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- IMQ driver loaded successfully.
- Hooking IMQ before NAT on PREROUTING.
- Hooking IMQ after NAT on POSTROUTING.
- xt_time: kernel timezone is -0000
- device wlan0 entered promiscuous mode
- br-lan: port 5(wlan0) entering forwarding state
- device wlan0 left promiscuous mode
- br-lan: port 5(wlan0) entering disabled state
|
|
/1 
IP卡
狗仔卡
发表于 2010-8-31 21:26
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡