|
正常kernel启动的log是下面的样子,你的可能bootloader阶段都死掉了,不一定是晶振问题,要是晶振,可能一点log都没输出,串口都不会正常工作哪来的log输出?
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.171 (runner@fv-az65) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r0-09836df)) #0 SMP Fri Mar 6 16:05:07 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: P&W R619AC 128M
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c0a28100, node_mem_map dfb79000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x3e8 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29516 r8192 d23732 u61440
[ 0.000000] pcpu-alloc: s29516 r8192 d23732 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129408
[ 0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 rootfstype=squashfs
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 509300K/522240K available (4610K kernel code, 162K rwdata, 1252K rodata, 1024K init, 236K bss, 12940K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0780a68 (5603 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a28a00 ( 163 kB)
[ 0.000000] .bss : 0xc0a2a000 - 0xc0a65158 ( 237 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000009] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[ 0.000024] Switching to timer-based delay loop, resolution 20ns
[ 0.000241] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[ 0.000260] pid_max: default: 32768 minimum: 301
[ 0.000443] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000462] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001200] CPU: Testing write buffer coherency: ok
[ 0.001961] Setting up static identity map for 0x80300000 - 0x80300060
[ 0.002116] Hierarchical SRCU implementation.
[ 0.002804] smp: Bringing up secondary CPUs ...
[ 0.005652] smp: Brought up 1 node, 4 CPUs
[ 0.005673] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.005682] CPU: All CPU(s) started in SVC mode.
[ 0.009838] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.010057] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.010086] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.010361] pinctrl core: initialized pinctrl subsystem
[ 0.011262] NET: Registered protocol family 16
[ 0.011596] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.012640] cpuidle: using governor ladder
[ 0.012685] cpuidle: using governor menu
[ 0.031027] usbcore: registered new interface driver usbfs
[ 0.031093] usbcore: registered new interface driver hub
[ 0.031179] usbcore: registered new device driver usb
[ 0.031230] pps_core: LinuxPPS API ver. 1 registered
[ 0.031240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.031269] PTP clock support registered
[ 0.032562] clocksource: Switched to clocksource arch_sys_counter
[ 0.033445] NET: Registered protocol family 2
[ 0.034117] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.034182] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.034271] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.034384] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.034420] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.034615] NET: Registered protocol family 1
[ 0.034664] PCI: CLS 0 bytes, default 64
[ 0.035702] No memory allocated for crashlog
[ 0.035909] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.039695] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.039710] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.045531] io scheduler noop registered
[ 0.045550] io scheduler deadline registered (default)
[ 0.047391] OF: PCI: host bridge /soc/pci@40000000 ranges:
[ 0.047429] OF: PCI: IO 0x40200000..0x402fffff -> 0x40200000
[ 0.047448] OF: PCI: MEM 0x40300000..0x40ffffff -> 0x40300000
[ 1.110496] qcom-pcie 40000000.pci: phy link never came up
[ 1.112068] qcom-pcie 40000000.pci: cannot initialize host
[ 1.112171] qcom-pcie: probe of 40000000.pci failed with error -110
[ 1.113703] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 1.113721] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 1.114987] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 1.115071] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[ 1.115153] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[ 1.115233] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 1.115873] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.116437] msm_serial 78af000.serial: msm_serial: detected port #0
[ 1.116480] msm_serial 78af000.serial: uartclk = 1843200
[ 1.116540] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 27, base_baud = 115200) is a MSM
[ 1.116567] msm_serial: console setup on port #0
[ 1.664506] console [ttyMSM0] enabled
[ 1.669421] msm_serial: driver initialized
[ 1.677242] loop: module loaded
[ 1.678491] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 1.679756] nand: AMD/Spansion S34ML01G1
[ 1.686411] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.690309] 1 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.697661] Creating 1 MTD partitions on "qcom_nand.0":
[ 1.704514] 0x000000000000-0x000008000000 : "rootfs"
[ 1.730749] random: fast init done
[ 1.883977] mtd: device 0 (rootfs) set to be root filesystem
[ 1.884575] mtdsplit: no squashfs found in "rootfs"
[ 1.889264] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.903103] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 1.903160] 3 fixed-partitions partitions found on MTD device spi0.0
[ 1.906790] Creating 3 MTD partitions on "spi0.0":
[ 1.913242] 0x000000000000-0x000000170000 : "Bootloader"
[ 1.918485] 0x000000170000-0x000000180000 : "ART"
[ 1.923962] 0x000000180000-0x000001000000 : "unused"
[ 1.929228] libphy: ipq40xx_mdio: probed
[ 1.963801] ESS reset ok!
[ 1.996784] ESS reset ok!
[ 2.415366] libphy: Fixed MDIO Bus: probed
[ 2.418634] i2c /dev entries driver
[ 2.420624] sdhci: Secure Digital Host Controller Interface driver
[ 2.421740] sdhci: Copyright(c) Pierre Ossman
[ 2.428037] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.432884] sdhci_msm 7824900.sdhci: core clock boost failed
[ 2.503582] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[ 2.525669] NET: Registered protocol family 10
[ 2.526989] Segment Routing with IPv6
[ 2.529080] NET: Registered protocol family 17
[ 2.533136] 8021q: 802.1Q VLAN Support v1.8
[ 2.537186] Registering SWP/SWPB emulation handler
[ 2.545237] ubi0: attaching mtd0
[ 3.646858] random: crng init done
[ 3.812181] ubi0: scanning is finished
[ 3.826415] ubi0: attached mtd0 (name "rootfs", size 128 MiB)
[ 3.826451] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.831148] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.837978] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.844797] ubi0: good PEBs: 1023, bad PEBs: 1, corrupted PEBs: 0
[ 3.851543] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 3.857818] ubi0: max/mean erase counter: 48/6, WL threshold: 4096, image sequence number: 0
[ 3.864945] ubi0: available PEBs: 20, total reserved PEBs: 1003, PEBs reserved for bad PEB handling: 19
[ 3.873555] ubi0: background thread "ubi_bgt0d" started, PID 89
[ 3.874821] block ubiblock0_1: created from ubi0:1(rootfs)
[ 3.888530] hctosys: unable to open rtc device (rtc0)
[ 3.900969] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.902673] Freeing unused kernel memory: 1024K
[ 4.342807] init: Console is alive
[ 4.343050] init: - watchdog -
[ 5.669802] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.713343] exFAT: Version 1.2.9
[ 5.728108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.732229] SCSI subsystem initialized
[ 5.736265] ehci-platform: EHCI generic platform driver
[ 5.738794] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.743332] ohci-platform: OHCI generic platform driver
[ 5.750043] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.029208] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.029293] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 6.033998] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
[ 6.041225] xhci-hcd xhci-hcd.0.auto: irq 129, io mem 0x08a00000
[ 6.051227] hub 1-0:1.0: USB hub found
[ 6.056853] hub 1-0:1.0: 1 port detected
[ 6.060677] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.064483] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 6.069722] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 6.077417] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.084482] hub 2-0:1.0: USB hub found
[ 6.092237] hub 2-0:1.0: 1 port detected
[ 6.096186] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.099864] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 6.105423] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
[ 6.112779] xhci-hcd xhci-hcd.1.auto: irq 130, io mem 0x06000000
[ 6.122699] hub 3-0:1.0: USB hub found
[ 6.128351] hub 3-0:1.0: 1 port detected
[ 6.132159] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.135992] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 6.141251] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 6.148930] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.155953] hub 4-0:1.0: USB hub found
[ 6.163839] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 6.171334] usbcore: registered new interface driver usb-storage
[ 6.174793] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.181798] init: - preinit -
[ 8.098453] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.098617] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 8.103459] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 8.109573] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.425429] mount_root: loading kmods from internal overlay
[ 11.454788] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 11.456272] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 12.236465] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 189
[ 12.302534] UBIFS (ubi0:2): recovery needed
[ 12.485817] UBIFS (ubi0:2): recovery completed
[ 12.485931] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 12.489167] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.497105] UBIFS (ubi0:2): FS size: 94978048 bytes (90 MiB, 748 LEBs), journal size 4698112 bytes (4 MiB, 37 LEBs)
[ 12.507000] UBIFS (ubi0:2): reserved for root: 4486047 bytes (4380 KiB)
[ 12.517225] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID AA2BDB22-6A37-474B-B080-183845AD7F89, small LPT model
[ 12.526781] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 12.546597] block: extroot: not configured
[ 12.614243] UBIFS (ubi0:2): un-mount UBI device 0
[ 12.614734] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
[ 12.627729] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 190
[ 12.769309] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 12.769354] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.776165] UBIFS (ubi0:2): FS size: 94978048 bytes (90 MiB, 748 LEBs), journal size 4698112 bytes (4 MiB, 37 LEBs)
[ 12.786043] UBIFS (ubi0:2): reserved for root: 4486047 bytes (4380 KiB)
[ 12.796284] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID AA2BDB22-6A37-474B-B080-183845AD7F89, small LPT model
[ 12.809131] mount_root: loading kmods from internal overlay
[ 12.854278] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 12.856806] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 13.408308] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 13.416075] block: extroot: not configured
[ 13.475273] mount_root: switching to ubifs overlay
[ 13.534702] urandom-seed: Seeding with /etc/urandom.seed
[ 13.769298] procd: - early -
[ 13.769432] procd: - watchdog -
[ 14.515368] procd: - watchdog -
[ 14.515756] procd: - ubus -
[ 14.606871] procd: - init -
[ 15.653868] kmodloader: loading kernel modules from /etc/modules.d/*
[ 15.676794] urngd: v1.0.2 started.
[ 15.688442] NET: Registered protocol family 15
[ 15.690814] Initializing XFRM netlink socket
[ 15.693607] tun: Universal TUN/TAP device driver, 1.6
[ 15.714298] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 15.723238] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.738760] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 15.774893] Netfilter messages via NETLINK v0.30.
[ 15.777187] ip_set: protocol 6
[ 15.800578] cryptodev: driver 1.10 loaded.
[ 15.802181] Mirror/redirect action on
[ 15.811619] u32 classifier
[ 15.811648] input device check on
[ 15.813282] Actions configured
[ 15.828864] fuse init (API version 7.26)
[ 15.834179] Loading modules backported from Linux version v4.19.98-0-gd183c8e2647a
[ 15.834219] Backport generated by backports.git v4.19.98-1-0-g8204eb99
[ 15.845201] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.888033] ctnetlink v0.93: registering with nfnetlink.
[ 15.948679] usbcore: registered new interface driver ums-alauda
[ 15.950440] usbcore: registered new interface driver ums-cypress
[ 15.955315] usbcore: registered new interface driver ums-datafab
[ 15.961191] usbcore: registered new interface driver ums-freecom
[ 15.967348] usbcore: registered new interface driver ums-isd200
[ 15.973519] usbcore: registered new interface driver ums-jumpshot
[ 15.978891] usbcore: registered new interface driver ums-karma
[ 15.986336] usbcore: registered new interface driver ums-sddr09
[ 15.991194] usbcore: registered new interface driver ums-sddr55
[ 15.997683] usbcore: registered new interface driver ums-usbat
[ 16.002407] usbcore: registered new interface driver usblp
[ 16.049717] xt_time: kernel timezone is -0000
[ 16.111188] PPP generic driver version 2.4.2
[ 16.113111] PPP MPPE Compression module registered
[ 16.116078] NET: Registered protocol family 24
[ 16.328293] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin
[ 16.328338] ath10k_ahb a000000.wifi: Load Wireless ART files
[ 23.625616] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 23.952110] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 23.952159] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 23.964064] ath10k_ahb a000000.wifi: firmware ver 10.4-3.6-00140 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 ba79b746
[ 24.010257] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 6ce1f887
[ 25.407369] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 25.433057] ath: EEPROM regdomain: 0x0
[ 25.433079] ath: EEPROM indicates default country code should be used
[ 25.433092] ath: doing EEPROM country->regdmn map search
[ 25.433115] ath: country maps to regdmn code: 0x3a
[ 25.433131] ath: Country alpha2 being used: US
[ 25.433143] ath: Regpair used: 0x3a
[ 25.637239] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin
[ 25.637285] ath10k_ahb a800000.wifi: Load Wireless ART files
[ 25.978421] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 25.978733] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 25.986409] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 25.999541] ath10k_ahb a800000.wifi: firmware ver 10.4-3.6-00140 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 ba79b746
[ 26.047107] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 6ce1f887
[ 27.451447] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 27.477763] ath: EEPROM regdomain: 0x0
[ 27.477786] ath: EEPROM indicates default country code should be used
[ 27.477798] ath: doing EEPROM country->regdmn map search
[ 27.477822] ath: country maps to regdmn code: 0x3a
[ 27.477838] ath: Country alpha2 being used: US
[ 27.477850] ath: Regpair used: 0x3a
[ 27.489919] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 30.401683] xt_FULLCONENAT: RFC3489 Full Cone NAT module
[ 30.401683] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang <tech@chionlab.moe>
[ 33.687693] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.691387] device eth0 entered promiscuous mode
[ 33.693856] br-lan: port 1(eth0.1) entered blocking state
[ 33.697235] br-lan: port 1(eth0.1) entered disabled state
[ 33.702970] device eth0.1 entered promiscuous mode
[ 33.709849] br-lan: port 1(eth0.1) entered blocking state
[ 33.712640] br-lan: port 1(eth0.1) entered forwarding state
[ 33.718451] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 34.712712] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.713611] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
|
|