[ax1800]: xiaoqiang ttl log

至尊***

[ax1800]: xiaoqiang ttl log


1. CMDLINE

1. root@XiaoQiang:~# cat /proc/cmdline
   
2. ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait uart_en=1 swiotlb=1 coherent_pool=2M

复制代码

2. partition

1. root@XiaoQiang:~# cat /proc/mtd
   
2. dev:    size   erasesize  name
   
3. mtd0: 00180000 00020000 "0:SBL1"
   
4. mtd1: 00100000 00020000 "0:MIBIB"
   
5. mtd2: 00380000 00020000 "0:QSEE"
   
6. mtd3: 00080000 00020000 "0:DEVCFG"
   
7. mtd4: 00080000 00020000 "0:RPM"
   
8. mtd5: 00080000 00020000 "0:CDT"
   
9. mtd6: 00080000 00020000 "0:APPSBLENV"
   
10. mtd7: 00180000 00020000 "0:APPSBL"
    
11. mtd8: 00080000 00020000 "0:ART"
    
12. mtd9: 00080000 00020000 "bdata"
    
13. mtd10: 00080000 00020000 "crash"
    
14. mtd11: 00080000 00020000 "crash_syslog"
    
15. mtd12: 02c80000 00020000 "rootfs"
    
16. mtd13: 02c80000 00020000 "rootfs_1"
    
17. mtd14: 01680000 00020000 "overlay"
    
18. mtd15: 00080000 00020000 "cfg_bak"
    
19. mtd16: 003a2000 0001f000 "kernel"
    
20. mtd17: 01249000 0001f000 "ubi_rootfs"
    
21. mtd18: 01249000 0001f000 "rootfs_data"
    
22. mtd19: 012e4000 0001f000 "data"

复制代码

3. flash layout

1. [    1.000289] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61
   
2. [    1.000427] nand: ONFI 10-Compliant GigaDevice PSR1GA30DT
   
3. [    1.006997] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
   
4. [    1.012308] 16 ofpart partitions found on MTD device qcom_nand.0
   
5. [    1.019730] Creating 16 MTD partitions on "qcom_nand.0":
   
6. [    1.025904] 0x000000000000-0x000000180000 : "0:SBL1"
   
7. [    1.033432] 0x000000180000-0x000000280000 : "0:MIBIB"
   
8. [    1.037880] 0x000000280000-0x000000600000 : "0:QSEE"
   
9. [    1.045030] 0x000000600000-0x000000680000 : "0:DEVCFG"
   
10. [    1.047281] 0x000000680000-0x000000700000 : "0:RPM"
    
11. [    1.052248] 0x000000700000-0x000000780000 : "0:CDT"
    
12. [    1.057049] 0x000000780000-0x000000800000 : "0:APPSBLENV"
    
13. [    1.061910] 0x000000800000-0x000000980000 : "0:APPSBL"
    
14. [    1.068422] 0x000000980000-0x000000a00000 : "0:ART"
    
15. [    1.072527] 0x000000a00000-0x000000a80000 : "bdata"
    
16. [    1.077335] 0x000000a80000-0x000000b00000 : "crash"
    
17. [    1.082185] 0x000000b00000-0x000000b80000 : "crash_syslog"
    
18. [    1.086949] 0x000000b80000-0x000003800000 : "rootfs"
    
19. [    1.132858] mtd: device 12 (rootfs) set to be root filesystem
    
20. [    1.133184] mtdsplit: no squashfs found in "rootfs"
    
21. [    1.137598] 0x000003800000-0x000006480000 : "rootfs_1"
    
22. [    1.183654] 0x000006480000-0x000007b00000 : "overlay"
    
23. [    1.205140] 0x000007b00000-0x000007b80000 : "cfg_bak"

复制代码

4. 完整log见附件