付费求个GT 5300的CFE或者编程器固件

zhou***

如题
fffc0006a82b4>] ubi_init+0x220/0x2e0
[<ffffffc000081034>] do_one_initcall+0x8c/0x1a8
[<ffffffc000691acc>] kernel_init_freeable+0x148/0x1e8
[<ffffffc0004f6dc0>] kernel_init+0x10/0xe0
bcm63xx_nand ff801800.nand: uncorrectable error at 0x6620c00
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 78:2048, read only 2048 bytes, retry
bcm63xx_nand ff801800.nand: uncorrectable error at 0x6620c00
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 78:2048, read only 2048 bytes, retry
bcm63xx_nand ff801800.nand: uncorrectable error at 0x6620c00
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 78:2048, read only 2048 bytes, retry
bcm63xx_nand ff801800.nand: uncorrectable error at 0x6620c00
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 78:2048, read 2048 bytes
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.27 #2
Hardware name: Broadcom-v8A (DT)
Call trace:
[<ffffffc0000876d8>] dump_backtrace+0x0/0x150
[<ffffffc00008783c>] show_stack+0x14/0x20
[<ffffffc0004fbe0c>] dump_stack+0x90/0xb0
[<ffffffc00034481c>] ubi_io_read+0x16c/0x388
[<ffffffc000344ef0>] ubi_io_read_vid_hdr+0x58/0x258
[<ffffffc000349c7c>] ubi_attach+0x29c/0x13c0
[<ffffffc00033e848>] ubi_attach_mtd_dev+0x578/0xc78
[<ffffffc0006a82b4>] ubi_init+0x220/0x2e0
[<ffffffc000081034>] do_one_initcall+0x8c/0x1a8
[<ffffffc000691acc>] kernel_init_freeable+0x148/0x1e8
[<ffffffc0004f6dc0>] kernel_init+0x10/0xe0
bcm63xx_nand ff801800.nand: uncorrectable error at 0x6640400
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 79:0, read only 64 bytes, retry
bcm63xx_nand ff801800.nand: uncorrectable error at 0x6640400
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 79:0, read only 64 bytes, retry
bcm63xx_nand ff801800.nand: uncorrectable error at 0x6640400
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 79:0, read only 64 bytes, retry
bcm63xx_nand ff801800.nand



while reading 2048 bytes from PEB 2:2048, read only 2048 bytes, retry
** 50 printk messages dropped ** [<ffffffc000347600>] wear_leveling_worker+0x108/0x710
** 28 printk messages dropped ** ubi0 warning: ubi_io_read: error -74 (ECC error)



一直出现这个错误   求个cfe文件  有偿

pal***

手动重建ubi分区，编程器刷进去你还是得手动重建ubi分区

zhou***

paldier 发表于 2020-11-13 09:52
手动重建ubi分区，编程器刷进去你还是得手动重建ubi分区

大佬 怎么操作 我可以加你吗  我的qq495263590 vx15556961858

pal***

这个很麻烦，华硕没有保留擦除指定位置的命令，用救砖切换到另一个分区吧，如果是你乱刷造成的那就没救了
如果能切换到另一个分区那就进系统后确定当前分区然后擦掉另一个分区
以后记得nand和spinand备份不要备份ecc否则基本上刷一个死一个

zhou***

paldier 发表于 2020-11-13 17:30
这个很麻烦，华硕没有保留擦除指定位置的命令，用救砖切换到另一个分区吧，如果是你乱刷造成的那就没救了
...

如果我用编程器写cfe文件再刷系统呢

ex***

GT 5300路由器的CFE和编程器文件我都有，还需要吗？

zhou***

exit 发表于 2020-12-23 03:08
GT 5300路由器的CFE和编程器文件我都有，还需要吗？

要的 要的 备用

ex***

zhou10001 发表于 2020-12-23 10:20
要的 要的 备用

你出多少钱购买？

ex***

zhou10001 发表于 2020-12-23 10:20
要的 要的 备用

你出多少钱购买？

zhou***

exit 发表于 2020-12-24 03:13
你出多少钱购买？

代价m

zygu***

https://qcsdn.com/q/a/7290565.html