|
刷的wrtsl54gs的cfe,一切正常刷固件可以使用
这几天心血来潮又刷了一个不知名固件就砖了,PING得通,无法TFTP刷固件,用USB-TTL,CTRL+C无法中断,自动停在下面代码的最后,请各位帮忙看下是怎么回事,谢谢了- CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
- Build Date: Mon Dec 26 17:51:02 CST 2005 (root@localhost.localdomain)
- Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
- Initializing Arena
- Initializing Devices.
- No DPN
- et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
- rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
- et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.37.0
- CPU type 0x29006: 264MHz
- Total memory: 65536 KBytes
- Total memory used by CFE: 0x80300000 - 0x803A39C0 (670144)
- Initialized Data: 0x803398D0 - 0x8033BFE0 (10000)
- BSS Area: 0x8033BFE0 - 0x8033D9C0 (6624)
- Local Heap: 0x8033D9C0 - 0x803A19C0 (409600)
- Stack Area: 0x803A19C0 - 0x803A39C0 (8192)
- Text (code) segment: 0x80300000 - 0x803398D0 (235728)
- Boot area (physical): 0x003A4000 - 0x003E4000
- Relocation Factor: I:00000000 - D:00000000
- Boot version: v3.7
- The boot is CFE
- No mac find, use default mac
- eou_key_init(): Find key pair in location 0
- The eou device id is same
- The eou public key is same
- The eou private key is same
- Device eth0: hwaddr 00-11-50-25-8E-9F, ipaddr 192.168.1.1, mask 255.255.255.0
- gateway not set, nameserver not set
- Reading :: Failed.: Timeout occured
- Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
- Loading: ...... 1880064 bytes read
- Entry at 0x80001000
- Closing network.
- Starting program at 0x80001000
- CPU revision is: 00029006
- Primary instruction cache 16kb, linesize 16 bytes (2 ways)
- Primary data cache 16kb, linesize 16 bytes (2 ways)
- Linux version 2.4.20 (root@linux) (gcc version 3.2.3 with Broadcom modifications) #36 Wed Oct 27 03:17:37 PDT 2010
- Setting the PFC to its default value
- Determined physical RAM map:
- memory: 04000000 @ 00000000 (usable)
- On node 0 totalpages: 16384
- zone(0): 16384 pages.
- zone(1): 0 pages.
- zone(2): 0 pages.
- Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
- CPU: BCM4704 rev 8 at 264 MHz
- Calibrating delay loop... 263.78 BogoMIPS
- Memory: 61684k/65536k available (1628k kernel code, 3852k reserved, 112k data, 72k init, 0k highmem)
- Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
- Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
- Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
- Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Checking for 'wait' instruction... unavailable.
- POSIX conformance testing by UNIFIX
- PCI: Initializing host
- PCI: Fixing up bus 0
- PCI: Fixing up bridge
- PCI: Fixing up bus 1
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- Initializing RT netlink socket
- Starting kswapd
- devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
- devfs: boot_options: 0x1
- squashfs: version 3.0 (2006/03/15) Phillip Lougher
- pty: 256 Unix98 ptys configured
- Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
- ttyS00 at 0xb8000300 (irq = 3) is a 16550A
- ttyS01 at 0xb8000400 (irq = 0) is a 16550A
- HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096
- N_HDLC line discipline registered.
- PPP generic driver version 2.4.2
- Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
- Amd/Fujitsu Extended Query Table v1.1 at 0x0040
- number of CFI chips: 1
- Flash device: 0x400000 at 0x1c000000
- Creating 5 MTD partitions on "Physically mapped flash":
- 0x00000000-0x00040000 : "pmon"
- 0x00040000-0x003f0000 : "linux"
- 0x001034e0-0x003d0000 : "rootfs"
- 0x003d0000-0x003f0000 : "jffs2"
- 0x003f0000-0x00400000 : "nvram"
- sflash: found no supported devices
- jhl_order: (C) 2007 jianhl
- jhl_share_init start
- jhl_share_init ok
- ksys_log : create a netlink socket ok!
- arp_sys start
- jhl_arp_sys_init ok
- jhl hostinfo init
- jhl_hixz_init start
- jhl_mqos_init start
- jhl_fenlei_init start
- jhl_conn_init start
- jhl_conn_init end
- jhl_dhcp_pool_init start
- jhl_dhcp_pool_init ok
- jhl_dns_cache_init ok
- jhl_acc_init start
- urlrd_init: (C) 2009 jianhl
- jhl_pppoe_init start
- jhl_pppoe_init ok
- jhl_user_init start
- jhl_user_init ok
- jhl_session_init start
- jhl_session_init ok
- jhl_msg_init start
- qj_init: (C) 2007 jianhl
- mroute_init: (C) 2009 jianhl
- jhl_jb_init start
- jhl_ddos_init ok
- jhlradius : create a netlink socket ok!
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 4096 bind 8192)
- Linux IP multicast router 0.06 plus PIM-SM
- ip_conntrack version 2.1 (8092 buckets, 4096 max) - 496 bytes per conntrack
- ip_tables: (C) 2000-2002 Netfilter core team
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- Freeing unused kernel memory: 72k freed
- Hit ENTER for console...
- Algorithmics/MIPS FPU Emulator v1.5
- sh: inithd: not found
- Saving...
- ip_conntrack_pptp version 1.9 loaded
- ip_nat_pptp version 1.5 loaded
- ip_conntrack_rtsp v0.01 loading
- ip_nat_rtsp v0.01 loading
- Unable to handle kernel paging request at virtual address 00000000, epc == 80170af4, ra == 801710d0
- Oops in fault.c::do_page_fault, line 192:
- $0 : 00000000 10008800 00000025 00000025 00000000 80182f18 83efdc88 80182f18
- $8 : 00000000 00000068 00000000 00000000 fffffffa ffffffff 0000000a 00000001
- $16: 800a1050 00000000 83efdc88 ffffffff 00000000 00000000 0000042f 00000032
- $24: 83efdb39 00000002 83efc000 83efdc30 100264a0 801710d0
- Hi : 95a9db29
- Lo : d6bf8005
- epc : 80170af4 Tainted: P
- Status: 10008803
- Cause : 00000008
- Process insmod (pid: 32, stackpage=83efc000)
- Stack: 100264a0 800a74c0 800a98f8 810b5660 810b5660 00000001 800a1050
- 800a0dfc 80170a84 810b5620 803f6800 00000018 801710d0 801758ac 800a9c74
- 80182f18 00000000 58003531 800aacc0 810b56ff 800a9850 80182f18 83efdc98
- 83efdc9a 83efdc9c 83efdc9e 800aa9a4 800aaa04 800a10dc 00000018 800a1050
- 800a0dfc 80170a84 810b5620 803f6800 00000018 0000042f 00000032 100264a0
- c00520f8 ...
- Call Trace: [<800a74c0>] [<800a98f8>] [<800a1050>] [<800a0dfc>] [<80170a84>]
- [<801710d0>] [<801758ac>] [<800a9c74>] [<80182f18>] [<800aacc0>] [<800a9850>]
- [<80182f18>] [<800aa9a4>] [<800aaa04>] [<800a10dc>] [<800a1050>] [<800a0dfc>]
- [<80170a84>] [<c00520f8>] [<c0054290>] [<c00530f0>] [<c0054420>] [<80007472>]
- [<c0051354>] [<c005133c>] [<800a95b0>] [<800a958c>] [<8016ee00>] [<c004f1f4>]
- [<c004f1b4>] [<80030208>] [<8002cd7c>] [<8002fe0c>] [<80022228>] [<c00543b8>]
- [<c00543f4>] [<800abc4c>] [<80030208>] [<c00543f4>] [<800abd34>] ...
- Code: 2413ffff 10400038 90a30000 <80820000> 10400036 02801021 306300ff 3c02801d 00431021
复制代码 |
|