|
楼主 |
发表于 2012-3-9 18:00
|
显示全部楼层
问问大家要怎么刷~给指条路啊~谢谢{:soso_e183:}
COM口连接 显示下面的信息 :
U-Boot 1.1.4 (Apr 19 2011 - 15:15:24)
AP96 (ar7100) U-boot 0.0.1
DRAM: b8050000: 0xc0140180
64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 221k for U-Boot at: 83fc4000
Reserving 384k for malloc() at: 83f64000
Reserving 44 Bytes for Board Info at: 83f63fd4
Reserving 36 Bytes for Global Data at: 83f63fb0
Reserving 128k for boot params() at: 83f43fb0
Stack Pointer at: 83f43f98
Now running in RAM - U-Boot at: 83fc4000
id read 0x100000ff
flash size 8MB, sector count = 64
Flash: 16 MB
*** using default environment ***
BOARD IS NOT CALIBRATED!!!
In: serial
Out: serial
Err: serial
Net: ag7100_enet_initialize...
No valid address in Flash. Using fixed address
M88E1116:
Setup M88E1116 Phy for 0
M88E1116: Port 0, Phy Found, Reset completed
M88E1116: unit 0 phy addr 14 eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
*** Press 1 means entering boot mode***
Press 2 means entering testing mode***
Press 3 means entering norm mode***
Hit key to stop autoboot: 0
Entering norm mode ...
Found image at 0xbf740000
Found image at 0xbf840000
foundVer = 2
****Try the first image...
imgPtr[image_num-1] = bf740000
## Booting image at bf740100 ...
Image Name: Linux Kernel Image
Created: 2011-09-11 11:53:40 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 987100 Bytes = 964 kB
Load Address: 80002000
Entry Point: 802c7000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 802c7000) ...
## Giving linux memsize in bytes, 67108864
Starting kernel ...
Linux version 2.6.15--LSDK-7.3.0.387 (xialei@localhost.localdomain) (gcc version 3.4.4) #1 Sun Sep 11 19:53:34 CST 2011
flash_size passed from bootloader = 16
arcs_cmdline = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
Check boot para cksum...
boot para cksum OK!
bootPara.runmode=3
CPU revision is: 00019374
setup_arch arcs_cmdline = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
setup_arch saved_command_line = console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
mem_size = 3fff000
User-defined physical RAM map:
memory: 03fff000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=31:04 rootfstype=squashfs init=/sbin/init mem=64M
line = 31:04
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 340.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61652k/65532k available (2277k kernel code, 3820k reserved, 554k data, 168k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
pdt_cspkernel_init
NET: Registered protocol family 16
1192:57:47 [KLog][Info] [oss_klog.c(694)ProcLog] System start!
1192:57:47 [KMONITOR][Notice] [monitor.c(199)MonitorInit] cspmonitor init... !
SCSI subsystem initialized
1192:57:47 [KQOS][Info] [qos.c(167)CSPKernel_QC_In] Qos module init
NET: Registered protocol family 2
ip_rt_init() start call CSP_alloc_large_system_hash
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
ip_rt_init() call CSP_alloc_large_system_hash end
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
AR7100 GPIOC major 0
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
system monitor is begining!!!!!
Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 1024K size 1024 blocksize
=======================> Core dev alloc name ifb0
=======================> Core dev alloc name ifb1
RedBoot partition parsing not available
PartitionNum = 9
Creating 9 MTD partitions on "ar7100-nor0":
0x00000000-0x01000000 : "whole_flash"
0x00000000-0x00040000 : "Bootloader"
0x00040000-0x00080000 : "BootEnv"
0x00080000-0x00100000 : "userconfig"
0x00100000-0x00740000 : "filesystem"
0x00740000-0x00840000 : "kernel"
0x00840000-0x00940000 : "kernel2"
0x00940000-0x00f80000 : "filesystem2"
0x00fc0000-0x01000000 : "parameters"
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
u32 classifier
Actions configured
nf_conntrack version 0.5.0 (511 buckets, 4088 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
=======================> Core dev alloc name sit0
=======================> Core dev alloc name ip6tnl0
NET: Registered protocol family 17
af_packet.c packet_init call register_netdevice_notifier
Bridge firewalling registered
br_init call register_netdevice_notifier
Ebtables v2.0 registered
NET: Registered protocol family 24
PPP Deflate Compression module registered
=======================> Core dev alloc name lo
1192:57:47 [LEDKEYDRV][Info] [ledkey_mod.c(1643)LedkeymodInit] Ledkey_mod Driver Version 0.0.1.
LedGpioInit gpio = 2
1192:57:47 [TAGPARAM][Info] [tagparam_mod.c(1383)TagaramodInit] Tagaram module Driver Version 0.0.1.
1192:57:47 [TAGPARAM][Info] [tagparam_mod.c(1423)TagaramodInit] parse tag param success
1192:57:47 [km255][Info] [ver_info.c(349)ver_info_init] ver_info_init
bootPara.bootWhichImg=1
bootPara.img_info_tbl[0].flashOffset=0x 740000
sHardVersion=V2.0
CspGetVerInfo exit
1192:57:47 [km255][Info] [ver_info.c(138)ReadInfoFromVer] ver_info_init
1192:57:47 [km255][Info] [ver_info.c(145)ReadInfoFromVer] ver_info_init
1192:57:47 [km255][Info] [ver_info.c(161)ReadInfoFromVer] wFirmwareForm is:0x1
1192:57:47 [KSWETH][Notice] [csp_ifinfo.c(191)csp_ifinfo_init] Initializing CSP IFinfo...
1192:57:47 [KSWETH][Warn] [csp_ifinfo.c(213)csp_ifinfo_init] No IFinfo in flash!
1192:57:47 [KSWETH][Notice] [sweth_core.c(2673)sweth_init] SWÐ HAL driver initing!
1192:57:47 [KSWETH][Notice] [sweth_core.c(129)CreateSwEthObjs] Create SW & ETH objects
1192:57:47 [KSWETH][Notice] [sweth_core.c(145)CreateSwEthObjs] Failed to get SWITCH attr, iRet=-2
1192:57:47 [KSWETH][Info] [sweth_core.c(152)CreateSwEthObjs] nEmac = 1, nSw = 0, nEth=1.
1192:57:47 [KSWETH][Info] [sweth_core.c(311)CreateSwEthObjs] ETH obj0: PhyType = 0, Is_assoc_sw = 0, Emac = 0, Phy = 20
ar7100wdt_init: Registering WDT wdt init success
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
init started: BusyBox v1.01 (2011.09.11-11:47+0000) multi-call binary
Bad inittab entry: ttyS0:-/bin/sh
Bad inittab entry: ttyS0:-/bin/sh
Starting pid 15, console /dev/ttyS0: '/etc/rc'
Algorithmics/MIPS FPU Emulator v1.5
init normal mode!!!
Loading drivers and kernel modules...
|
|