哪位大佬帮帮我呀........r1d TTL救砖求救

sanzang

ttL信息  摁ctrl c没反应还是跳这个不断重启




CFE version v1.0.4
BSP: 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Tue Oct 14 20:37:39 CST 2014 (xqdevel@fanjialin-ct)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot up from NOR flash...
Boot partition size = 262144(0x40000)
Can't find nandflash! ccrev = 42, chipst= 0
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350)
CPU type 0x0: 1000MHz
Tot mem: 262144 KBytes

CFE mem:    0x00F00000 - 0x017A0354 (9044820)
Data:       0x00F587C8 - 0x00F58DE0 (1560)
BSS:        0x00F58DF0 - 0x00F9E354 (284004)
Heap:       0x00F9E354 - 0x0179E354 (8388608)
Stack:      0x0179E354 - 0x017A0354 (8192)
Text:       0x00F00000 - 0x00F4CE34 (314932)
Boot:       0x017A1000 - 0x017E1000
Reloc:      I:00000000 - D:00000000

Device eth0:  hwaddr 00-90-4C-0F-F2-A7, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Boot program checksum is invalid
flash0.0: Device not found
bootargs: boot -raw -z -addr=0x8000 -max=0xef8000 flash0.squashfs:
Loader:raw Filesys:raw Dev:flash0.squashfs File: Optionsnull)
Loading: Image compressed with unsupported method
Failed.
Could not load flash0.squashfs:: Unsupported function
Digital core power voltage set to 1.0V
Decompressing...done
Digital core power voltage set to 1.0V
Decompressing...done
Found a ST compatible (Marconix) serial flash with 256 64KB blocks; total size 16MB


CFE version v1.0.4
BSP: 6.37.14.93 (r469350) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Tue Oct 14 20:37:39 CST 2014 (xqdevel@fanjialin-ct)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot up from NOR flash...
Boot partition size = 262144(0x40000)
Can't find nandflash! ccrev = 42, chipst= 0
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.93 (r469350)
CPU type 0x0: 1000MHz
Tot mem: 262144 KBytes

CFE mem:    0x00F00000 - 0x017A0354 (9044820)
Data:       0x00F587C8 - 0x00F58DE0 (1560)
BSS:        0x00F58DF0 - 0x00F9E354 (284004)
Heap:       0x00F9E354 - 0x0179E354 (8388608)
Stack:      0x0179E354 - 0x017A0354 (8192)
Text:       0x00F00000 - 0x00F4CE34 (314932)
Boot:       0x017A1000 - 0x017E1000
Reloc:      I:00000000 - D:00000000

Device eth0:  hwaddr 00-90-4C-0F-F2-A7, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Boot program checksum is invalid
flash0.0: Device not found
bootargs: boot -raw -z -addr=0x8000 -max=0xef8000 flash0.squashfs:
Loader:raw Filesys:raw Dev:flash0.squashfs File: Optionsnull)
Loading: Image compressed with unsupported method
Failed.
Could not load flash0.squashfs:: Unsupported function
Digital core power voltage set to 1.0V
Decompressing...done
Digital core power voltage set to 1.0V
Decompressing...done
Found a ST compatible (Marconix) serial flash with 256 64KB blocks; total size 16MB

lst344

这个东西，还是消停放家里当个小nas存个照片得了

sanzang

lst344 发表于 2023-8-10 22:13
这个东西，还是消停放家里当个小nas存个照片得了

我也想啊 这不菜鸟乱刷砖了嘛.......想救砖

superveve

我也碰到这个问题了，准备发帖问一下

sanzang

superveve 发表于 2023-8-21 23:40
我也碰到这个问题了，准备发帖问一下

你解决了没

superveve

sanzang 发表于 2023-8-23 19:22
你解决了没

没

sanzang

superveve 发表于 2023-8-25 02:37
没

我大概整明白是咋回事了 正在搞 行了和你说

sanzang

superveve 发表于 2023-8-25 02:37
没

草特  终于搞定了......341驱动里面有个TTL的驱动死活打不上，放弃了 直接夹子夹FLASH刷就行了 想刷啥刷啥

superveve

sanzang 发表于 2023-8-25 07:53
草特  终于搞定了......341驱动里面有个TTL的驱动死活打不上，放弃了 直接夹子夹FLASH刷就行了 想刷啥刷 ...

发个帖子 教教我咋弄 我也刷一下flash

sanzang

superveve 发表于 2023-8-26 14:01
发个帖子 教教我咋弄 我也刷一下flash

你有以前的备份吗 我刷回原版了 倒腾来倒腾去还是原版好用 等周天吧 我也捋一捋 到时发个帖子

sanzang

superveve 发表于 2023-8-26 14:01
发个帖子 教教我咋弄 我也刷一下flash

r1d刷FLASH救砖 呃  经验
https://www.right.com.cn/FORUM/thread-8303164-1-1.html
(出处: 恩山无线论坛)