【大神求救】竞斗云刷完20191129liugengrong的固件成砖了

rel***

原来按照教程TTL正常刷好了X-wrt的固件，没刷uboot和opboot，后来手痒系统在线刷了下面这个贴子的固件后成砖了，现在插电后只有电源灯亮，其它灯都不亮了

20191129_竞斗云2.0升级opboot及支持128M nand openwrt固件带V2-ray
https://www.right.com.cn/forum/thread-1442821-1-1.html



用TTL连上电脑看启动显示为


怎么救啊？？？？？请大神帮忙看一下

LGA***

128M NAND 的固件只能用 opboot 1.0.9 启动

wwd***

为什么不先刷Opboot呢

liuge***

上编程器夹子吧，我的教程是原厂固件升级，非原厂的刷为原厂再按步骤来就没事

liuge***

可以进uboot的话刷原厂固件后再按教程也可以升级成功，x-wrt固件的分区和我提供的不一样，刷后肯定启动不了

rel***

liugengrong 发表于 2019-12-5 20:47
可以进uboot的话刷原厂固件后再按教程也可以升级成功，x-wrt固件的分区和我提供的不一样，刷后肯定启动不了

能具体说一下怎么在uboot下刷原厂固件吗？TTL命令怎么用？

rel***

LGA1150 发表于 2019-12-5 19:43
128M NAND 的固件只能用 opboot 1.0.9 启动

大神教我！！！！

rel***

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00117
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1338 - bootable_media_detect_entry, Start
B -      1678 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7211 - auth_hash_seg_exit, Start
B -    578930 - elf_segs_hash_verify_entry, Start
B -    696929 - PBL, End
B -    696953 - SBL1, Start
B -    787718 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    789243 - boot_flash_init, Start
D -     62837 - boot_flash_init, Delta
B -    856223 - boot_config_data_table_init, Start
D -      3841 - boot_config_data_table_init, Delta - (419 Bytes)
B -    863436 - clock_init, Start
D -      7559 - clock_init, Delta
B -    875494 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    878907 - sbl1_ddr_set_params, Start
B -    884004 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    888386 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13176 - sbl1_ddr_set_params, Delta
B -    901698 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    972787 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -    988963 - Image Load, Start
D -    140783 - QSEE Image Loaded, Delta - (274048 Bytes)
B -   1130180 - Image Load, Start
D -      1434 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1140495 - Image Load, Start
D -    206275 - APPSBL Image Loaded, Delta - (422031 Bytes)
B -   1347166 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1353389 - SBL1, End
D -    658512 - SBL1, Delta
S - Flash Throughput, 2005 KB/s  (698546 Bytes,  348300 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 [Chaos Calmer 15.05.1,unknown] (Dec 27 2017 - 12:06:09)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ID = 1d00f101
Vendor = 1
Device = f1
ONFI device found
Is a spansion device needing reset logic
SF: Detected W25Q128 with page size 64 KiB, total 16 MiB
ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x1000000
144 MiB
MMC:   qca_mmc: 0
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Hit any key to stop autoboot:  0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000004000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI error: ubi_read_volume_table: the layout volume was not found
UBI error: ubi_init: cannot attach mtd2
UBI error: ubi_init: UBI error: cannot initialize UBI, error -22
UBI init error 22
qca_mmc: 0
(IPQ40xx) #

rel***

LGA1150 发表于 2019-12-5 19:43
128M NAND 的固件只能用 opboot 1.0.9 启动

能给个刷OPBOOT 1.0.9教程链接我学习一下吗？

huan***

relax78 发表于 2019-12-5 23:07
能给个刷OPBOOT 1.0.9教程链接我学习一下吗？

uboot刷.ubi的固件，就可以了.

你刷固件，把ubi分区信息冲掉了。

rel***

huangfc_1 发表于 2019-12-5 23:09
uboot刷.ubi的固件，就可以了.

你刷固件，把ubi分区信息冲掉了。

那是不是成砖没救了？？我现在已经到不了UBOOT的命令行方式了

rel***

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00117
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1338 - bootable_media_detect_entry, Start
B -      1678 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7211 - auth_hash_seg_exit, Start
B -    578930 - elf_segs_hash_verify_entry, Start
B -    696921 - PBL, End
B -    696945 - SBL1, Start
B -    787708 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    789234 - boot_flash_init, Start
D -     62845 - boot_flash_init, Delta
B -    856223 - boot_config_data_table_init, Start
D -      3838 - boot_config_data_table_init, Delta - (419 Bytes)
B -    863428 - clock_init, Start
D -      7571 - clock_init, Delta
B -    875499 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    878912 - sbl1_ddr_set_params, Start
B -    884010 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    888392 - Pre_DDR_clock_init, Start
D -         5 - Pre_DDR_clock_init, Delta
D -     13177 - sbl1_ddr_set_params, Delta
B -    901705 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    972797 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -    989191 - Image Load, Start
D -    140863 - QSEE Image Loaded, Delta - (274048 Bytes)
B -   1130488 - Image Load, Start
D -      1442 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1140787 - Image Load, Start
D -    206291 - APPSBL Image Loaded, Delta - (422031 Bytes)
B -   1347475 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1353693 - SBL1, End
D -    658823 - SBL1, Delta
S - Flash Throughput, 2005 KB/s  (698546 Bytes,  348395 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 [Chaos Calmer 15.05.1,unknown] (Dec 27 2017 - 12:06:09)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ID = 1d00f101
Vendor = 1
Device = f1
ONFI device found
Is a spansion device needing reset logic
SF: Detected W25Q128 with page size 64 KiB, total 16 MiB
ipq_spi: page_size: 0x100, sector_size: 0x10000, size: 0x1000000
144 MiB
MMC:   qca_mmc: 0
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Hit any key to stop autoboot:  0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000004000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
Nand Flash error. Status = 12336
NAND page read failed. page: 0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 100 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 140 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 180 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 200 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 240 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 280 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 300 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 340 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 380 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 3c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 400 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 440 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 480 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 4c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 500 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 540 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 580 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 5c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 600 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 640 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 680 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 6c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 700 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 740 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 780 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 7c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 800 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 840 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 880 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 8c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 900 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 940 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 980 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 9c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: a00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: a40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: a80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: ac0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: b00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: b40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: b80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: bc0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: c00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: c40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: c80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: cc0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: d00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: d40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: d80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: dc0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: e00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: e40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: e80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: ec0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: f00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: f40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: f80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: fc0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1000 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1040 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1080 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 10c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1100 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1140 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1180 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 11c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1200 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1240 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1280 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 12c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1300 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1340 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1380 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 13c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1400 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1440 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1480 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 14c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1500 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1540 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1580 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 15c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1600 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1640 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1680 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 16c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1700 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1740 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1780 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 17c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1800 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1840 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1880 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 18c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1900 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1940 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1980 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 19c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1a00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1a40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1a80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1ac0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1b00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1b40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1b80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1bc0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1c00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1c40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1c80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1cc0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1d00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1d40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1d80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1dc0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1e00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1e40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1e80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1ec0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1f00 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1f40 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1f80 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 1fc0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2000 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2040 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2080 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 20c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2100 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2140 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2180 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 21c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2200 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2240 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2280 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 22c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2300 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2340 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2380 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 23c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2400 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2440 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2480 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 24c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2500 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2540 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2580 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 25c0 status ffffffb6
Nand Flash error. Status = 12336
NAND page read failed. page: 2600 status ffffffb6
UBI: volume 2 ("rootfs_data") re-sized from 1 to 351 LEBs
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            64 MiB
UBI: number of good PEBs:        511
UBI: number of bad PEBs:         1
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     3
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 511
UBI: number of PEBs reserved for bad PEB handling: 5
UBI: max/mean erase counter: 6/3
Read 0 bytes from volume kernel to 84000000
No size specified -> Using max size (3936256)
## Booting kernel from FIT Image at 84000000 ...
   Using 'config@10' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ARM OpenWrt Linux-4.14.155
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x840000e4
     Data Size:    2271688 Bytes = 2.2 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   f1fdfbdc
     Hash algo:    sha1
     Hash value:   251661577c52424bcc96988e9610ff08eee0f60c
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
   Using 'config@10' configuration
   Trying 'fdt@1' FDT blob subimage
     Description:  ARM OpenWrt p2w_r619ac-128m device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x8422abe8
     Data Size:    16593 Bytes = 16.2 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   e4085a2a
     Hash algo:    sha1
     Hash value:   66044a285a293e73653be8caa1492047629659f5
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x8422abe8
   Loading Kernel Image ... OK
OK
   Loading Device Tree to 86ff8000, end 86fff0d0 ... OK
ipq: fdt fixup unable to find compatible node
Using machid 0x8010006 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.155 (runner@fv-az51) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r1731-c4ba9eb9)) #0 SMP Thu Nov 28 09:07:17 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: P&W R619AC 128M
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x3e8 with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu s29516 r8192 d23732 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129408
[    0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 rootfstype=squashfs
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 509300K/522240K available (4608K kernel code, 162K rwdata, 1252K rodata, 1024K init, 236K bss, 12940K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc0780330   (5601 kB)
[    0.000000]       .init : 0xc0900000 - 0xc0a00000   (1024 kB)
[    0.000000]       .data : 0xc0a00000 - 0xc0a289c0   ( 163 kB)
[    0.000000]        .bss : 0xc0a2a000 - 0xc0a650d8   ( 237 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[    0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[    0.000022] Switching to timer-based delay loop, resolution 20ns
[    0.000242] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[    0.000261] pid_max: default: 32768 minimum: 301
[    0.000445] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000462] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001202] CPU: Testing write buffer coherency: ok
[    0.001971] Setting up static identity map for 0x80300000 - 0x80300060
[    0.002124] Hierarchical SRCU implementation.
[    0.002804] smp: Bringing up secondary CPUs ...
[    0.005652] smp: Brought up 1 node, 4 CPUs
[    0.005672] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[    0.005681] CPU: All CPU(s) started in SVC mode.
[    0.010011] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.010176] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.010202] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.010481] pinctrl core: initialized pinctrl subsystem
[    0.011384] NET: Registered protocol family 16
[    0.011713] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.012770] cpuidle: using governor ladder
[    0.012814] cpuidle: using governor menu
[    0.031301] usbcore: registered new interface driver usbfs
[    0.031364] usbcore: registered new interface driver hub
[    0.031454] usbcore: registered new device driver usb
[    0.031509] pps_core: LinuxPPS API ver. 1 registered
[    0.031518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.031549] PTP clock support registered
[    0.032837] clocksource: Switched to clocksource arch_sys_counter
[    0.033719] NET: Registered protocol family 2
[    0.034384] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.034448] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.034538] TCP: Hash tables configured (established 4096 bind 4096)
[    0.034647] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.034685] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.034897] NET: Registered protocol family 1
[    0.035981] No memory allocated for crashlog
[    0.036188] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.040113] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.040130] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.045949] io scheduler noop registered
[    0.045970] io scheduler deadline registered (default)
[    0.047823] OF: PCI: host bridge /soc/pci@40000000 ranges:
[    0.047858] OF: PCI:    IO 0x40200000..0x402fffff -> 0x40200000
[    0.047878] OF: PCI:   MEM 0x40300000..0x40ffffff -> 0x40300000
[    1.110725] qcom-pcie 40000000.pci: phy link never came up
[    1.112298] qcom-pcie 40000000.pci: cannot initialize host
[    1.112403] qcom-pcie: probe of 40000000.pci failed with error -110
[    1.113944] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[    1.113963] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[    1.115266] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[    1.115350] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[    1.115426] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[    1.115499] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[    1.116153] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.116723] msm_serial 78af000.serial: msm_serial: detected port #0
[    1.116769] msm_serial 78af000.serial: uartclk = 1843200
[    1.116821] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 27, base_baud = 115200) is a MSM
[    1.116850] msm_serial: console setup on port #0
[    1.665219] console [ttyMSM0] enabled
[    1.670152] msm_serial: driver initialized
[    1.678066] loop: module loaded
[    1.679307] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[    1.680469] nand: AMD/Spansion S34ML01G1
[    1.687128] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.691018] 1 fixed-partitions partitions found on MTD device qcom_nand.0
[    1.698379] Creating 1 MTD partitions on "qcom_nand.0":
[    1.705229] 0x000000000000-0x000008000000 : "rootfs"
[    1.731652] random: fast init done
[    1.884783] mtd: device 0 (rootfs) set to be root filesystem
[    1.885372] mtdsplit: no squashfs found in "rootfs"
[    1.890062] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.903605] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    1.903660] 3 fixed-partitions partitions found on MTD device spi0.0
[    1.907290] Creating 3 MTD partitions on "spi0.0":
[    1.913745] 0x000000000000-0x000000170000 : "Bootloader"
[    1.919012] 0x000000170000-0x000000180000 : "ART"
[    1.924442] 0x000000180000-0x000001000000 : "unused"
[    1.929722] libphy: ipq40xx_mdio: probed
[    1.964363] ESS reset ok!
[    1.997359] ESS reset ok!
[    2.415929] libphy: Fixed MDIO Bus: probed
[    2.419242] i2c /dev entries driver
[    2.421231] sdhci: Secure Digital Host Controller Interface driver
[    2.422305] sdhci: Copyright(c) Pierre Ossman
[    2.428600] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.433389] sdhci_msm 7824900.sdhci: Got CD GPIO
[    2.438809] sdhci_msm 7824900.sdhci: core clock boost failed
[    2.506121] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[    2.521692] NET: Registered protocol family 10
[    2.525656] Segment Routing with IPv6
[    2.525977] NET: Registered protocol family 17
[    2.529683] 8021q: 802.1Q VLAN Support v1.8
[    2.533550] Registering SWP/SWPB emulation handler
[    2.545233] ubi0: attaching mtd0
[    3.679119] random: crng init done
[    4.743555] ubi0: scanning is finished
[    4.755987] ubi0 error: ubi_read_volume_table: bad attaching information, error 1
[    4.756021] Volume attaching information dump:
[    4.762444]         vol_id         0
[    4.766817]         highest_lnum   30
[    4.769821]         leb_count      31
[    4.772770]         compat         0
[    4.775844]         vol_type       3
[    4.778849]         used_ebs       0
[    4.781796]         last_data_size 53248
[    4.784771]         data_pad       0
[    4.788050] Volume information dump:
[    4.791003]         vol_id          0
[    4.794665]         reserved_pebs   19
[    4.797511]         alignment       1
[    4.800550]         data_pad        0
[    4.803692]         vol_type        3
[    4.806717]         name_len        6
[    4.809752]         usable_leb_size 126976
[    4.812788]         used_ebs        19
[    4.816194]         used_bytes      2412544
[    4.819300]         last_eb_bytes   126976
[    4.823137]         corrupted       0
[    4.826331]         upd_marker      0
[    4.829458]         name            kernel
[    4.832904] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd0, error -22
[    4.835912] UBI error: cannot attach mtd0
[&#386976; 4.848427] Waiting for root device /dev/ubiblock0_1...

15105***

看看我的帖子有详细教程

ceas***

为什么不先刷Opboot呢

rel***

15105696210 发表于 2019-12-6 08:28
看看我的帖子有详细教程

看了你的主页，没看到教程嘛，只看到你之前发的求助贴，能给个链接吗？？？？