找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 3920|回复: 10

紧急求助 hg255d 升级变砖 本来已经刷了 op 20120508

[复制链接]
发表于 2015-11-12 08:50 | 显示全部楼层 |阅读模式
本帖最后由 573613955 于 2015-11-12 08:52 编辑

想升级一下下了个包 结果就成转了
一开始这个版本
刷了这个 PandoraBox-ralink-hg255d-r353-20140505.bin

直接在网页里面 选的更新固件

上电先 乱码 然后就打印 在就不动了

▒▒怘▒▒f▒▒▒▒▒`8▒8▒▒8▒▒f▒x8x▒▒x8▒x~f8▒▒▒怘▒▒f▒~▒▒▒▒▒8f▒▒▒ff▒▒Ά▒▒▒▒ff▒▒▒▒ff▒▒~▒▒▒~▒▒▒▒▒▒x▒▒8▒8xx8▒▒▒▒▒▒▒`▒▒Θ▒888`▒▒▒▒x▒▒▒▒~f▒f▒Ξ`fx8枆▒▒`fx▒▒~▒88x▒888▒▒▒xf▒~▒▒▒▒▒▒怘▒▒f▒▒f`▒▒▒▒▒`▒▒x▒f怘▒▒x▒▒▒▒▒▒▒x▒▒`▒x▒▒▒▒▒f▒▒f▒~▒▒▒f~f▒▒▒▒f`f▒▒f~x▒▒fx▒▒`▒x▒▒▒▒▒fx`▒▒fx~▒f▒f▒▒fx▒▒x▒x▒▒▒▒▒f▒▒▒`fx~▒▒▒x▒▒▒▒▒`~▒▒▒▒▒`x▒▒x▒▒▒▒▒f▒▒▒`fx~▒▒▒x▒▒▒▒▒`~▒▒▒▒▒``x▒`▒▒怘▒▒▒▒▒▒f▒▒▒~▒▒▒fx▒▒▒▒▒▒▒▒▒▒f▒▒~xf▒xf~▒`▒▒▒▒xf▒▒▒f▒▒`▒怘▒▒▒ffffff▒▒▒▒`~▒~▒▒▒▒~▒~~▒▒▒▒fx▒~▒▒~▒▒▒▒x▒▒▒▒▒▒▒▒▒▒x▒▒ff▒fff▒▒~▒xf▒▒`▒▒▒▒`▒▒f▒▒▒f▒~▒▒fx`▒▒~x▒▒▒~f▒▒~`▒▒▒▒▒f▒▒▒▒~x▒`▒`f▒▒▒▒怘▒▒▒`▒`▒`f▒▒f▒▒ffxfx▒▒▒x▒▒▒▒f▒`▒`▒▒▒▒▒~▒▒▒~f▒▒fx▒▒▒f▒▒f▒▒fx▒▒`▒▒▒f~f▒▒怘▒▒~f▒▒▒▒▒▒`▒~▒▒怆▒ff▒▒fx▒f▒▒▒▒f`▒f▒`f`▒▒`f昘▒怆▒ff▒f`f▒▒f▒`f`▒▒`f昘▒怘▒▒~f▒▒f▒`f`▒f▒f`f▒▒▒▒▒`fx~▒▒f▒▒▒~f▒`fx~▒▒`▒▒▒▒~▒▒▒▒fxf▒▒▒▒▒▒~▒▒▒x▒▒▒▒`▒▒▒xf▒▒▒▒▒`fx~▒▒f▒▒▒~f▒`fx~▒▒`▒▒▒▒~▒▒fxff▒▒f▒▒~ff▒▒▒▒`fx~▒▒f▒▒▒~f▒`fx~▒▒`▒▒▒▒~▒▒fxff▒▒▒x▒▒▒▒▒`▒▒f▒▒~ff▒▒▒▒`fx~▒▒`▒▒▒▒▒`fxxff~▒`f▒▒▒▒▒▒▒`▒▒▒▒▒▒`▒▒▒▒▒▒▒`▒▒▒▒f▒▒▒▒`fx▒x▒▒fx▒▒▒▒▒▒▒x▒f▒▒▒▒▒`fx~▒▒f▒▒▒~f▒`fx~▒▒`▒▒▒▒~▒▒▒▒fxf▒▒▒▒▒▒~▒▒▒x▒▒▒▒`▒▒▒xf▒▒▒▒▒`fx~▒▒f▒▒▒~f▒`fx~▒▒`▒▒▒▒~▒▒fxff▒怀▒▒▒▒▒▒▒~▒▒f▒▒~ff▒▒▒▒▒`▒▒f▒▒~ff▒▒▒▒`fx~▒▒`▒▒▒▒▒怘▒▒▒▒~▒▒▒f▒fx~f▒~f▒▒▒f~▒▒▒▒▒▒▒▒f▒▒▒▒▒▒▒▒f~xf▒▒f▒▒~▒▒x`▒▒▒f~▒▒▒▒x`▒▒~~▒▒▒~`▒x▒▒▒~▒▒▒▒▒▒▒▒▒~▒▒▒f▒f~▒▒fx▒`f▒▒▒f▒f▒▒▒~▒▒▒▒▒▒▒▒f▒▒▒怘▒▒f▒fx▒▒▒fxx▒▒~▒▒▒▒`▒▒ff▒▒▒▒`▒~▒ff▒▒f▒xff▒▒~▒▒▒f▒▒▒▒▒▒f~▒▒▒▒▒▒▒▒▒▒f▒▒xf▒f▒f▒~f▒▒▒`▒f▒▒枀▒▒▒▒ff▒▒`▒▒▒▒▒▒▒fx~fx▒x▒▒▒▒昞▒▒▒▒▒~`~f▒▒▒ff▒▒▒f▒▒xff▒fx▒▒f▒f▒▒▒▒▒f▒▒fx▒▒f▒▒f▒▒xf▒▒f▒▒▒▒▒▒▒fx▒▒fx`f▒▒▒▒`~▒▒f▒▒fx▒▒▒x▒▒x▒f~f▒▒▒▒▒▒▒x▒▒▒▒▒▒~▒▒▒▒`▒▒ff▒▒▒▒`▒~▒ff▒▒f▒xff▒▒~▒▒▒f▒▒▒▒▒▒f~▒▒▒▒▒▒▒▒▒▒▒▒▒f▒▒▒▒▒▒fx▒▒f▒▒~▒▒fx▒▒f▒▒f▒▒xf▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒`▒▒x▒▒▒▒`ff▒▒▒xf▒▒▒f▒▒~▒▒▒▒`▒▒▒▒~▒▒▒▒▒▒f▒~▒▒x`▒▒fx▒▒▒▒▒▒▒▒▒`▒`▒▒xf▒▒~▒▒▒▒f▒▒fx▒f▒▒fx▒▒▒▒▒▒▒▒`怘▒▒f~▒▒~▒▒▒~▒▒fx▒▒f▒▒▒▒怘▒▒
PandoraBox For Ralink SoC. Copyright 2005-2013 Lintel<lintel.huang@gmail.com>


Linux Kernel started...

THIS IS ASIC
[    0.000000] Linux version 3.4.88 (lintel@EmbeddedLab-Server) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Mon May 5 19:40:51 CST 2014
[    0.000000] CPU Running in Little-Endian Mode !
[    0.000000] Ralink RT3052 CPU:384MHz, Bus:128MHz Uart:128MHz
[    0.000000] Boot form:NOR FLASH
[    0.000000]  Detecting memory...64 MB!
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS1,115200n8 board=HG255D rootfstype=squashfs
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=000181e8
[    0.000000] Readback ErrCtl register=000181e8
[    0.000000] Memory: 61808k/65536k available (2366k kernel code, 3728k reserved, 376k data, 172k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.090000] Mount-cache hash table entries: 512
[    0.100000] NET: Registered protocol family 16
[    0.100000] Ralink/MTK BootROM maped.
[    0.110000] General GPIO Driver for Ralink RT3052 Board. Copyright lintel 2005-2013
[    0.120000] gpiochip_add: registered GPIOs 0 to 23 on device: RT305X-GPIO0
[    0.120000] gpiochip_add: registered GPIOs 24 to 39 on device: RT305X-GPIO1
[    0.130000] gpiochip_add: registered GPIOs 40 to 51 on device: RT305X-GPIO2
[    0.130000] MIPS: machine is HuaWei HG255D
[    0.140000] Ralink Board GPIO_MODE init:
[    0.140000]  I2C:GPIO
[    0.140000]  SPI:GPIO
[    0.140000]  UART_F:GPIO
[    0.150000]  JTAG:GPIO
[    0.150000] GPIO_MODE_REGs: 0x5f
[    0.150000] ralink_register_flash:NOR Flash.
[    0.170000] bio: create slab <bio-0> at 0
[    0.180000] Switching to clocksource MIPS
[    0.190000] NET: Registered protocol family 2
[    0.190000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.190000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.200000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.210000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.220000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] NET: Registered protocol family 1
[    0.230000] Ralink SoC clocks api init.
[    0.240000] Ralink GPIODEV resource maped.
[    0.240000] Load Kernel WDG Timer Module
[    0.250000] Load Ralink Timer0 Module
[    0.280000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.290000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) &#169; 2001-2006 Red Hat, Inc.
[    0.300000] msgmni has been set to 120
[    0.300000] io scheduler noop registered
[    0.310000] io scheduler deadline registered (default)
[    0.310000] io scheduler cfq registered
[    0.320000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.320000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A
[    0.330000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A
[    0.340000] Enable Ralink GDMA Controller Module
[    0.370000] brd: module loaded
[    0.370000] physmap platform flash device: 01000000 at bf000000
[    0.380000] physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
[    0.390000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.390000]   Amd/Fujitsu Extended Query version 1.3.
[    0.400000] number of CFI chips: 1
[    0.400000] Creating 5 MTD partitions on "physmap-flash":
[    0.410000] 0x000000000000-0x000000040000 : "U-Boot"
[    0.420000] 0x000000040000-0x000000060000 : "U-Boot-Env"
[    0.420000] 0x000000060000-0x000000080000 : "Factory"
[    0.430000] 0x000000000000-0x000001000000 : "fullflash"
[    0.440000] 0x000000080000-0x000001000000 : "firmware"
[    0.450000] Creating 2 MTD partitions on "physmap-flash":
[    0.450000] 0x000000080000-0x000000180000 : "kernel"
[    0.460000] 0x000000180000-0x000001000000 : "rootfs"
[    0.470000] mtd: partition "rootfs" set to be root filesystem
[    0.470000] mtd: partition "rootfs_data" created automatically, ofs=940000, len=6C0000
[    0.480000] 0x000000940000-0x000001000000 : "rootfs_data"
[    0.490000] EEPROM:Read from [Factory] offset 0x28,length 0x6.
[    0.500000] GMAC1_MAC_ADRH -- : 0x0000000c
[    0.500000] GMAC1_MAC_ADRL -- : 0x43305277
[    0.510000] Ralink APSoC Ethernet Driver Initilization. v3.0.1  256 rx/tx descriptors allocated, mtu = 1500!
[    0.520000] NAPI enable, Tx Ring = 256, Rx Ring = 256
[    0.520000] Feature:{NAPI} {HW_CSO} {HW_VLAN_TX} {SKB_RECYCLE_2K}
[    0.530000] EEPROM:Read from [Factory] offset 0x28,length 0x6.
[    0.530000] warning: ra_mtd_read_nm: rdlen is not equal to len
[    0.540000] GMAC1_MAC_ADRH -- : 0x0000000c
[    0.540000] GMAC1_MAC_ADRL -- : 0x43305277
[    0.550000] PROC INIT OK!
[    0.550000] rt305x switch driver registered.
[    0.560000] TCP: cubic registered
[    0.560000] NET: Registered protocol family 17
[    0.560000] Bridge firewalling registered
[    0.570000] 8021q: 802.1Q VLAN Support v1.8
[    0.580000] SQUASHFS error: unable to read id index table
[    0.580000] List of all partitions:
[    0.590000] 1f00             256 mtdblock0  (driver?)
[    0.590000] 1f01             128 mtdblock1  (driver?)
[    0.600000] 1f02             128 mtdblock2  (driver?)
[    0.600000] 1f03           16384 mtdblock3  (driver?)
[    0.610000] 1f04           15872 mtdblock4  (driver?)
[    0.610000] 1f05            1024 mtdblock5  (driver?)
[    0.620000] 1f06           14848 mtdblock6  (driver?)
[    0.620000] 1f07            6912 mtdblock7  (driver?)
[    0.630000] No filesystem could mount root, tried:  squashfs
[    0.630000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,6)


本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
发表于 2015-11-12 10:26 | 显示全部楼层
肯定会砖的了。你到uboot里面升级试试,应该还有救

点评

uboot 进不去啊  详情 回复 发表于 2015-11-12 11:19
回复 支持 反对

使用道具 举报

发表于 2015-11-12 10:38 | 显示全部楼层
按着WPS键(或RESET或另一个)上电开机,浏览器输入192.168.1.1,然后进入UBOOT刷新固件。建议更新最新的UBOOT先。

点评

按键后 电源灯闪 串口只打印到乱码那就停了  详情 回复 发表于 2015-11-12 11:20
回复 支持 反对

使用道具 举报

 楼主| 发表于 2015-11-12 11:19 | 显示全部楼层
tttt222 发表于 2015-11-12 10:26
肯定会砖的了。你到uboot里面升级试试,应该还有救

uboot
进不去啊
回复 支持 反对

使用道具 举报

 楼主| 发表于 2015-11-12 11:20 | 显示全部楼层
lch911 发表于 2015-11-12 10:38
按着WPS键(或RESET或另一个)上电开机,浏览器输入192.168.1.1,然后进入UBOOT刷新固件。建议更新最新的UB ...

按键后 电源灯闪   串口只打印到乱码那就停了
回复 支持 反对

使用道具 举报

发表于 2015-11-12 11:36 | 显示全部楼层
别大神了。你再买个不就完 了。
回复 支持 反对

使用道具 举报

发表于 2015-11-12 11:41 | 显示全部楼层
我都是没用TTL刷的,你说的串口输出我不太懂,呵呵。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2015-11-13 08:43 | 显示全部楼层
人呢  下貌似就是文化系统问题啊
回复 支持 反对

使用道具 举报

 楼主| 发表于 2015-11-13 10:05 | 显示全部楼层
原来是波特率弄错了  

点评

修好了吗?,我的也砖了...  详情 回复 发表于 2017-1-16 16:52
回复 支持 反对

使用道具 举报

发表于 2017-1-16 16:52 | 显示全部楼层
573613955 发表于 2015-11-13 10:05
原来是波特率弄错了

修好了吗?,我的也砖了...

点评

当时就好了啊  详情 回复 发表于 2017-5-10 15:06
回复 支持 反对

使用道具 举报

 楼主| 发表于 2017-5-10 15:06 | 显示全部楼层
estest 发表于 2017-1-16 16:52
修好了吗?,我的也砖了...

当时就好了啊
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-5-29 04:55

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表