|
楼主 |
发表于 2016-9-13 18:55
|
显示全部楼层
U-Boot 1.1.4 (Aug 20 2014 - 09:44:10)
Autobooting in 1 seconds
Load Default Boot Params.
## Starting application at 0x9F040000 ...
Host Name: bootHost
User: target
Rx clbufs 2700 each of size 1756
eth_rx_netpool_init: allocated, pDmaBuf=0x8102a950, buffend = 814b5604
ATHRS27: resetting s27
ATHRS27: s27 reset done
eth_rx_netpool_init: done already!
mirrorEndLoad: No physical device found
Instantiating /ram as rawFs, device = 0x1
Formatting /ram for DOSFS
Instantiating /ram as rawFs, device = 0x1
Formatting...Retrieved old volume params with %38 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, sysId (null) , serial number 9a0000
Label:" " ...
Disk with 64 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT12, sectors per cluster 1
2 FAT copies, 54 clusters, 1 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 2
Root dir entries 112, sysId VXDOS12 , serial number 9a0000
Label:" " ...
OK.
List of bridge ports not specified! -
Please set the bridge configuration parameter BRIDGE_PORTS.
This must a list of comma-separated device name and unit number pairs.
For example: "fei,0,fei,1,elPci,0"
portsStringParse failed!
Adding 20715 symbols for standalone.
AH_CAL_IN_FLASH_AHB
Restoring Cal data from Flash
Starting WLAN
TP-LINK > Adding ath0 in bridge ...
原厂固件启动信息 |
|