已解决，ttl进去命令不懂

ht***

下午没事手欠啊，给totolink a700r(感觉自己好像用得是 a850r呢、还升级？)在web升了个级，启动不了。
看灯一直在闪：
先亮电源灯，后变cpu，再网口灯，然后网口灯灭，cpu灯灭，这样一直循环…………就是无线灯不亮

感觉还能抢救一下吧，上ttl，傻眼了，显示rtl 8196d，不对啊，这个应该是rtl 8197d
命令也看不懂，大神来指导下吧

<RealTek>?
----------------- COMMAND MODE HELP ------------------
HELP (?)                                    : Print this help message
DB <Address> <Len>
DW <Address> <Len>
EB <Address> <Value1> <Value2>...
EW <Address> <Value1> <Value2>...
CMP: CMP <dst><src><length>
IPCONFIG:<TargetAddress>
AUTOBURN: 0/1
LOADADDR: <Load Address>
J: Jump to <TargetAddress>
FLR: FLR <dst><src><length>
FLW <dst_ROM_offset><src_RAM_addr><length_Byte> <SPI cnt#>: Write offset-data to SPI from RAM
MDIOR:  MDIOR <phyid> <reg>
MDIOW:  MDIOW <phyid> <reg> <data>
PHYR: PHYR <HYID><reg>
PHYW: PHYW <HYID><reg><data>
PORT1: port 1 patch for FT2
<RealTek>

ht***

启动过程：
一直重复。。…。…。……

Booting...

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0000000h 0c84016h 00000c8h 0000040h 0000016h 0000000h 0000016h 0400000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 0010000h 0000040h 0001000h 0000400h 0000100h 0000010h 000002dh GD25Q32
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

---RealTek(RTL8196D)at 2013.12.27-12:35+0800 v1.2 [16bit](700MHz)
no rootfs signature at 000E0000!
no rootfs signature at 000F0000!
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
start address: 0x80003400
Realtek WLAN driver - version 1.6 (2013-02-21)
DFS function - version 1.0.18
8812 mp chip !!


#######################################################
SKB_BUF_SIZE=3600 MAX_SKB_NUM=768
#######################################################



#######################################################
SKB_BUF_SIZE=3600 MAX_SKB_NUM=768
#######################################################




Probing RTL8186 10/100 NIC-kenel stack size order[3]...
chip name: 8196C, chip revid: 0
NOT YET
eth0 added. vid=9 Member port 0x10...
eth1 added. vid=8 Member port 0x1...
eth2 added. vid=9 Member port 0x2...
eth3 added. vid=9 Member port 0x4...
eth4 added. vid=9 Member port 0x8...
eth5 added. vid=9 Member port 0x0...
[peth0] added, mapping to [eth1]...
Realtek FastPath:v1.03
init started: BusyBox v1.13.4 (2015-09-08 08:40:25 CST)
Init Start...
Init bridge interface...
<=== FirmwareDownload8812()
Not support AC!!
<=== FirmwareDownload8812()
Not support AC!!
<=== FirmwareDownload8812()
Not support AC!!
<=== FirmwareDownload8812()
Not support AC!!
<=== FirmwareDownload8812()
Not support AC!!

Booting...

xjin***

修复得怎样了？弄好了吗？

peng***

上ttl处理好了没

ht***

不好意思啊，这个路由器插了标了，他只是个630n，刷固件好了