|
新手小白N1盒子刷openwrt
写入机器然后重启以后就没反应
哪个大神指导指导
root@OpenWrt:~# ./install-to-emmc.sh
AUTO_MAINLINE_UBOOT:
SPECIFY_SOC:
SPECIFY_DTB:
SHARED_FSTYPE:
Current device: Phicomm N1 [ amlogic ]
/dev/mmcblk2
mmcblk2 : 7818182656 bytes
ROOTFS: sda2
BOOT: sda1
Please select s9xxx box model:
----------------------------------------------------------------------------------------------------
Amlogic GXL Family >>>
11. Phicomm N1 s905d 4C@1512Mhz,2GB Mem,1Gb Nic,brcm43455 wifi
12. Phicomm N1 (DMA thresh) s905d Same as above, when ethmac flow control is off
13. hg680p & b860h s905x 4C@1512Mhz,1Gb Nic
14. X96-Mini & TX3-Mini s905w 4C@1512Mhz,100M Nic
Amlogic GXM Family >>>
21. Octopus Planet s912 4C@1512Mhz+4C@1000Mhz,2GB Mem,1Gb Nic
Amlogic G12A Family >>>
31. X96 Max 4GB s905x2 4C@1908Mhz,4GB Mem,1Gb Nic
32. X96 Max 2GB s905x2 4C@1908Mhz,2GB Mem,100M Nic
Amlogic G12B Family >>>
41. Beelink GT-King s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic,brcm4356 wifi
42. Beelink GT-King Pro s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic,brcm4356 wifi
43. Beelink GT-King Pro H s922x S922X-H,2C@1800Mhz(A53)+4C@2208Mhz(A73),4GB Mem,1Gb Nic,brcm4356 wifi
44. Beelink GT-King Pro Rev_A s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic,brcm4356 wifi
45. Hardkernel ODroid N2 s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic
46. UGOOS AM6 Plus s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic,brcm4398 wifi
47. Khadas VIM3 a311d 4C@2.2Ghz+2C@1.8Ghz,PCIe+USB 3.0,1Gb Nic,brcm4398 wifi
Amlogic SM1 Family >>>
51. X96 Max+ s905x3 4C@2100Mhz,4GB Mem,1Gb Nic,rtl8822cs wifi(no work)
52. X96 Max+ (OverClock) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,rtl8822cs wifi(no work)
53. HK1 Box s905x3 4C@2100Mhz,4GB Mem,1Gb Nic,brcm4339 wifi
54. HK1 Box (OverClock) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,brcm4339 wifi
55. H96 Max X3 s905x3 4C@2100Mhz,4GB Mem,1Gb Nic,brcm4339 wifi
56. H96 Max X3 (OverClock) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,brcm4339 wifi
57. Ugoos X3 s905x3 4C@2100Mhz,2(Cube)/4(Pro,Plus)GB Mem,1Gb Nic,brcm43455/43456 wifi
58. Ugoos X3 (OverClock) s905x3 4C@2208Mhz,2(Cube)/4(Pro,Plus)GB Mem,1Gb Nic,brcm43455/43456 wifi
59. TX3 BZ s905x3 4C@2100Mhz,4GB Mem,100Mb Nic,bcm4330 wifi
5a. TX3 BZ (OverClock) s905x3 4C@2208Mhz,4GB Mem,100Mb Nic,bcm4330 wifi
5b. TX3 QZ s905x3 4C@2100Mhz,4GB Mem,1Gb Nic,bcm4330 wifi
5c. TX3 QZ (OverClock) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,bcm4330 wifi
Other >>>
0. Other Enter the dtb file name of your box
----------------------------------------------------------------------------------------------------
Please choose: 11
FDT Value [ meson-gxl-s905d-phicomm-n1.dtb ]
This Kernel [ 5.4.188-flippy-71+o ]
5.4.188-flippy-71+o
/mnt/mmcblk2p1
umount -f /mnt/mmcblk2p1
/mnt/mmcblk2p2
umount -f /mnt/mmcblk2p2
/mnt/mmcblk2p3
umount -f /mnt/mmcblk2p3
/mnt/mmcblk2p4
umount -f /mnt/mmcblk2p4
A total of [ 4 ] old partitions on EMMC will be deleted
Welcome to fdisk (util-linux 2.37.3).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): Partition number (1-4, default 4):
Partition 4 has been deleted.
Command (m for help): Partition number (1-3, default 3):
Partition 3 has been deleted.
Command (m for help): Partition number (1,2, default 2):
Partition 2 has been deleted.
Command (m for help): Selected partition 1
Partition 1 has been deleted.
Command (m for help): Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): Partition number (1-4, default 1): First sector (2048-15269887, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (139264-15269887, default 15269887):
Created a new partition 1 of type 'Linux' and of size 512 MiB.
Command (m for help): Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (2048-15269887, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (1638400-15269887, default 15269887):
Created a new partition 2 of type 'Linux' and of size 960 MiB.
Command (m for help): Partition type
p primary (2 primary, 0 extended, 2 free)
e extended (container for logical partitions)
Select (default p): Partition number (3,4, default 3): First sector (2048-15269887, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (3604480-15269887, default 15269887):
Created a new partition 3 of type 'Linux' and of size 960 MiB.
Command (m for help): Partition type
p primary (3 primary, 0 extended, 1 free)
e extended (container for logical partitions)
Select (default e):
Selected partition 4
First sector (2048-15269887, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (5570560-15269887, default 15269887):
Created a new partition 4 of type 'Linux' and of size 4.6 GiB.
Command (m for help): Partition number (1-4, default 4): Hex code or alias (type L to list all):
Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.
Command (m for help): Partition number (1-4, default 4): Hex code or alias (type L to list all):
Changed type of partition 'Linux' to 'Linux'.
Command (m for help): Partition number (1-4, default 4): Hex code or alias (type L to list all):
Changed type of partition 'Linux' to 'Linux'.
Command (m for help): Partition number (1-4, default 4): Hex code or alias (type L to list all):
Changed type of partition 'Linux' to 'Linux'.
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
Partition complete.
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
Write Android bootloader: [ /lib/u-boot/u-boot-2015-phicomm-n1.bin ]
444+0 records in
444+0 records out
8191+0 records in
8191+0 records out
Start creating file system ...
Create a boot file system ...
format boot partiton...
mkfs.fat 4.2 (2021-01-31)
Cannot initialize conversion from codepage 850 to UTF-8: No error information
Cannot initialize conversion from UTF-8 to codepage 850: No error information
Using internal CP850 conversion table
format rootfs1 partiton...
btrfs-progs v5.16.1
See http://btrfs.wiki.kernel.org for more information.
NOTE: several default settings have changed in version 5.15, please make sure
this does not affect your deployments:
- DUP for metadata (-m dup)
- enabled no-holes (-O no-holes)
- enabled free-space-tree (-R free-space-tree)
Label: EMMC_ROOTFS1
UUID: 947b7294-5e18-4fde-ab09-6d9f6246d512
Node size: 16384
Sector size: 4096
Filesystem size: 960.00MiB
Block group profiles:
Data: single 8.00MiB
Metadata: single 8.00MiB
System: single 4.00MiB
SSD detected: yes
Zoned device: no
Incompat features: extref, skinny-metadata, no-holes
Runtime features: free-space-tree
Checksum: crc32c
Number of devices: 1
Devices:
ID SIZE PATH
1 960.00MiB /dev/mmcblk2p2
format rootfs2 partiton...
btrfs-progs v5.16.1
See http://btrfs.wiki.kernel.org for more information.
NOTE: several default settings have changed in version 5.15, please make sure
this does not affect your deployments:
- DUP for metadata (-m dup)
- enabled no-holes (-O no-holes)
- enabled free-space-tree (-R free-space-tree)
Label: EMMC_ROOTFS2
UUID: 1f683101-da51-4807-ab0f-b228128943c2
Node size: 16384
Sector size: 4096
Filesystem size: 960.00MiB
Block group profiles:
Data: single 8.00MiB
Metadata: single 8.00MiB
System: single 4.00MiB
SSD detected: yes
Zoned device: no
Incompat features: extref, skinny-metadata, no-holes
Runtime features: free-space-tree
Checksum: crc32c
Number of devices: 1
Devices:
ID SIZE PATH
1 960.00MiB /dev/mmcblk2p3
Wait for the boot file system to mount ...
Successfully mounted.
copy boot ...
Edit uEnv.txt ...
complete.
complete.
Wait for the rootfs file system to mount ...
Successfully mounted
Create folder ...
Create subvolume './etc'
complete.
Copy data ...
copy [ root ] ...
copy [ etc ] ...
copy [ bin ] ...
copy [ sbin ] ...
copy [ lib ] ...
copy [ opt ] ...
copy [ usr ] ...
copy [ www ] ...
Copy complete.
Update the relevant parameters of flippy-openwrt-release
Update complete.
Edit configuration file ...
Create initial etc snapshot -> .snapshots/etc-000Create a readonly snapshot of 'etc' in '.snapshots/etc-000'
complete.
Create a shared file system.
---------------------------------------------------------------------------------
Please select the type of shared file system:
1. ext4: [Default options] suitable for general use.
2. btrfs: Which can extend the service life of ssd/mmc.
3. f2fs: Fast reading and writing speed, but the compatibility is slightly poor.
4. xfs: Very good file system, alternative to ext4.
---------------------------------------------------------------------------------
1
mke2fs 1.46.5 (30-Dec-2021)
Successful installed, please unplug the USB, re-insert the power supply to start the openwrt.
root@OpenWrt:~# ^C
root@OpenWrt:~#
|
|