|
|
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 7.839430] mount_root: mounting /dev/root
[ 8.411562] ubi1: attaching mtd20
[ 8.528697] ubi1: scanning is finished
[ 8.534629] ubi1: attached mtd20 (name "overlay", size 31 MiB)
[ 8.534657] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 8.539349] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 8.546251] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 8.553084] ubi1: good PEBs: 248, bad PEBs: 0, corrupted PEBs: 0
[ 8.559847] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 8.566087] ubi1: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1593352588
[ 8.573132] ubi1: available PEBs: 0, total reserved PEBs: 248, PEBs reserved for bad PEB handling: 20
[ 8.582445] ubi1: background thread "ubi_bgt1d" started, PID 142
UBI device number 1, total 248 LEBs (31490048 bytes, 30.0 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
ubimkvol: error!: UBI device does not have free logical eraseblocks
[ 8.683020] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 153
[ 8.708499] UBIFS (ubi1:0): recovery needed
[ 8.776845] UBIFS (ubi1:0): recovery completed
[ 8.776997] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "data"
[ 8.780293] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.787426] UBIFS (ubi1:0): FS size: 27172864 bytes (25 MiB, 214 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 8.797388] UBIFS (ubi1:0): reserved for root: 1283441 bytes (1253 KiB)
[ 8.807620] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 018E8616-79A2-4DCD-AB30-467FC330CE07, small LPT model
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.626304 seconds, 204.4KB/s
ln: /lib/firmware/IPQ5018/caldata.bin: File exists
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.632014 seconds, 202.5KB/s
ln: /lib/firmware/qcn6122/caldata_1.bin: File exists
[ 10.164833] urandom-seed: Seed file not found (/etc/urandom.seed)
do_mount_bind_etc...
start do data_mount_fail_recover
[ 10.740923] procd: - early -
[ 10.741027] procd: - watchdog -
[ 11.349825] procd: - watchdog -
[ 11.350113] procd: - ubus -
[ 11.411689] procd: - init -
Please press Enter to activate this console.
/etc/rc.d/S00sysfixtime: Thu Jul 15 12:22:29 UTC 2021
/etc/rc.d/S00wifi_fw_mount: 131072+0 records in
/etc/rc.d/S00wifi_fw_mount: 131072+0 records out
/etc/rc.d/S00wifi_fw_mount: 131072 bytes (128.0KB) copied, 0.633434 seconds, 202.1KB/s
/etc/rc.d/S00wifi_fw_mount: ln: /lib/firmware/IPQ5018/caldata.bin: File exists
/etc/rc.d/S00wifi_fw_mount: 131072+0 records in
/etc/rc.d/S00wifi_fw_mount: 131072+0 records out
/etc/rc.d/S00wifi_fw_mount: 131072 bytes (128.0KB) copied, 0.632169 seconds, 202.5KB/s
/etc/rc.d/S00wifi_fw_mount: ln: /lib/firmware/qcn6122/caldata_1.bin: File exists
/etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/mem failed: Resource busy
/etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/net_cls failed: Resource busy
/etc/rc.d/S03cgroup_init: mount: mounting none on /dev/cgroup/cpu failed: Resource busy
[ 13.230609] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.259291] cfg80211: World regulatory domain updated:
[ 13.259318] cfg80211: DFS Master region: unset
[ 13.263419] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.267925] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.277539] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.285314] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.295320] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.302694] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 13.312403] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.321848] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.329924] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.655973] ssdk_switch_device_num_init[1159]:INFO:ess-switch dts node number: 2
[ 13.656019] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist!
[ 13.662523] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: local bus
[ 13.668419] ssdk_dt_parse_access_mode[869]:INFO:switchreg_base_addr: 0x39c00000
[ 13.675690] ssdk_dt_parse_access_mode[870]:INFO:switchreg_size: 0x200000
[ 13.682780] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0xf
[ 13.689684] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit!
[ 13.694998] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit!
[ 13.701625] ssdk_dt_parse_port_bmp[757]:INFO:port_bmp doesn't exist!
[ 13.707932] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist!
[ 13.714278] ssdk_dt_parse_led[943]:INFO:current dts led_source_num is 1
[ 13.719920] ssdk_plat_init start
[ 16.129735] ssdk_mp_reset_init[739]:INFO:MP reset successfully!
[ 16.129797] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully!
[ 16.135227] mpge_phy_api_ops_init[1089]:INFO:qca probe mpge phy driver succeeded!
[ 16.142209] mpge_phy_dac_set[917]:INFO:phy mdac is set as 0x10
[ 16.149166] mpge_phy_dac_set[929]:INFO:phy edac is set as 0x10
[ 16.154956] regi_init[3947]:INFO:Initializing SCOMPHY!
[ 17.293745] _adpt_mp_uniphy_clk_output_ctrl_set[236]:INFO:uniphy will output clock as 25000000Hz
[ 17.293942] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:bfc, ssdk_led_src_id:0
[ 17.301716] ssdk_switch_register[1727]:INFO:Chip version 0xee
[ 17.309680] qca_link_polling_select[1332]:INFO:link-polling-required node does not exist
[ 17.315322] ssdk_switch_register[1761]:INFO:polling is selected
[ 17.323472] regi_init[3957]:INFO:Initializing SCOMPHY Done!!
[ 17.329132] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist!
[ 17.335029] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: mdio
[ 17.341008] ssdk_dt_parse_mac_mode[292]:INFO:mac mode doesn't exit!
[ 17.347852] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit!
[ 17.353854] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit!
[ 17.360487] ssdk_dt_parse[1061]:INFO:switch node is qca83xx!
[ 17.366774] ssdk_plat_init start
[ 17.436210] f1_phy_api_ops_init[1517]:INFO:qca probe f1 phy driver succeeded!
[ 17.436234] regi_init[3905]:INFO:Initializing ISISC!!
[ 17.442336] /soc/ess-instance/ess-switch1@1: could not get #gpio-cells for /reserved-memory/q6_ipq5018_data@4C400000
[ 17.649725] qca_ar8327_gpio_reset[3506]:INFO:GPIO26 reset switch done
[ 17.649907] ssdk_switch_register[1735]:INFO:Chip version 0x1302
[ 17.655155] qca_link_polling_select[1332]:INFO:link-polling-required node does not exist
[ 17.660889] ssdk_switch_register[1761]:INFO:polling is selected
[ 18.686076] qca_ar8327_hw_init[708]:INFO:AR8327_REG_LED_CTRL_0=0xcc35cff5
[ 19.309713] regi_init[3910]:INFO:Initializing ISISC Done!!
[ 19.309876] init port map proc seccess!regi_init[3988]:INFO:qca-ssdk module init succeeded!
[ 19.326029] **********************************************************
[ 19.326056] * NSS Data Plane driver
[ 19.331552] **********************************************************
[ 19.340633] l2tp_core: L2TP core driver, V2.0
[ 19.342342] l2tp_netlink: L2TP netlink interface
[ 19.619357] nss_driver - fw of size 761612 bytes copied to load addr: 40000000, nss_id : 0
[ 19.620976] Supported Frequencies -
[ 19.626503] 850 MHz 1 GHz
[ 19.632140]
[ 19.633043] 7f23eb80: set sdma 8a54fe00
[ 19.634818] node size 2 # items 4
[ 19.638050] memory: 40000000 268435456 (avl 207982592) items 4 active_cores 1
[ 19.641631] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000
[ 19.648643] 7f23eb80: NSS core 0 DDR from 40000000 to 40800000
[ 19.655525] 7f23eb80: meminfo init succeed
[ 19.664788] gre: GRE over IPv4 demultiplexor driver
[ 19.666644] ip_gre: GRE over IPv4 tunneling driver
[ 19.676954] ip6_gre: GRE over IPv6 tunneling driver
[ 19.693196] node size 2 # items 4
[ 19.693222] memory: 40000000 268435456 (avl 207982592) items 4 active_cores 1
[ 19.694892] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 19.702676] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000
[ 19.709052] 7f23eb80: nss core 0 booted successfully
[ 19.726131] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.747904] nf_conntrack version 0.5.0 (2857 buckets, 40000 max)
[ 20.610926] Netfilter messages via NETLINK v0.30.
[ 20.613043] ip_set: protocol 6
[ 20.691489] ssdk_port_link_notify[527]:INFO CA8337 port 1 link up speed 1000M duplex full
[ 21.092061] ssdk_port_link_notify[527]:INFOCA8337 port 5 link up speed 1000M duplex full
[ 24.972285] PPP generic driver version 2.4.2
[ 25.220833] NET: Registered protocol family 24
[ 25.531271] PPTP driver version 0.8.5
[ 25.752582] cannot find nss-macsec0 node
[ 25.752668] cannot find nss-macsec1 node
[ 25.755697] cannot find nss-macsec2 node
[ 25.759496] nss_macsec init success
[ 26.070826] u32 classifier
[ 26.070845] input device check on
[ 26.892427] ipaccount: ifname [lo] event[5]
[ 26.892454] ipaccount: ifname [eth0] event[5]
[ 26.895446] ipaccount: ifname [eth1] event[5]
[ 26.900054] ipaccount: ifname [ip6tnl0] event[5]
[ 26.904313] ipaccount: ifname [gre0] event[5]
[ 26.909183] ipaccount: ifname [gretap0] event[5]
[ 26.913336] ipaccount: ifname [ip6gre0] event[5]
[ 26.917918] ipaccount: ifname [bond0] event[5]
[ 27.344410] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.349399] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 27.611058] PPP MPPE Compression module registered
[ 27.624761] ipt: xt_cgroup_MARK installed ok.
[ 27.655381] xt_time: kernel timezone is -0000
[ 27.673848] kmodloader: done loading kernel modules from /etc/modules.d/*
/etc/rc.d/S10boot: cat: can't open '/etc/config/wireless': No such file or directory
[ 34.152802] configuring additional NSS pbufs
[ 34.156710] additional pbufs of size 802816 got added to NSS
[ 34.209558] mem_manager: module license 'Proprietary' taints kernel.
[ 34.209586] Disabling lock debugging due to kernel taint
[ 34.250358] qdf: unknown parameter 'mem_debug_disabled' ignored
[ 38.658690] wlan: [911:I:RPTR] qca_multi_link_init_module:
[ 38.658690] ******QCA Repeater Initialization Done***********
[ 38.658690]
******FW ini file not found******
******No cold_boot_support*****
[ 39.760079] wlan: [917:I:ANY] =======ol_if_register_wifi3_0==========
[ 39.760079]
[ 39.760116] wlan: [917:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:7fcfd9e0
[ 39.766923] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss
[ 39.802157] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[ 41.678018] Subsystem error monitoring/handling services are up
[ 41.678367] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up
[ 41.678868] rpmsg_dev_probe: No pm domain
[ 41.679847] rpmsg_dev_probe: No pm domain
[ 41.694794] wlan: [917:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[ 41.698732] remoteproc remoteproc1: powering up q6v5_wcss_userpd1
[ 41.714639] q6v5_wcss_userpd1 wcss powered up successfully
[ 41.716611] Subsystem error monitoring/handling services are up
[ 41.718247] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[ 41.718544] cnss[2]: INFO: device_id : 65532 mem mode : [2]
[ 41.719827] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ5018/AP-MP02.1
[ 41.719828] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x2504ffff, fw_build_timestamp: 2021-07-09 03:51, otp_version: 0x0 eeprom_caldata_read_timeout 0s
[ 41.719843] cnss[2]: INFO: Using Boardid from bootargs:0x24
[ 41.735947] cnss[2]: INFO: BDF location : 0x4c400000
[ 41.735952] cnss[2]: INFO: BDF IPQ5018/bdwlan.b24 size 131072
[ 41.736867] cnss[2]: INFO: per device BDF location : 0x4c420000
[ 41.737007] cnss[2]: INFO: CALDATA IPQ5018/caldata.bin size 131072 offset 0x20000
[ 41.786421] remoteproc remoteproc1: remote processor q6v5_wcss_userpd1 is now up
[ 41.794085] wlan: [917:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[ 41.801531] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffc, FW ready timeout: 15 seconds
[ 41.809201] cnss[2]: INFO: FW ready received for device 0xfffc
[ 41.818179] wlan: [917:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode
[ 41.823865] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[ 41.834497] wlan: [917:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4
[ 41.837986] wlan: [917:I:ANY] __ol_ath_attach: Allocated soc 89200480
[ 41.846848] wlan: [917 :dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[ 41.853503] wlan: [917:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5018.ini; status:4
[ 41.864312] wlan: [917:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc
[ 41.873208] wlan: [917:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 7 Target Type 1d
[ 41.883872] wlan: [917:I:ANY] __ol_ath_attach: dev name soc0
[ 41.892114] wlan: [917:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 89793000
[ 41.901721] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 41.905001] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 41.915208] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 41.925099] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 41.935109] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 41.945053] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 41.955235] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[ 41.965021] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[ 41.974994] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[ 41.986262] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[ 41.994961] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 42.004963] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 42.014920] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[ 42.024914] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[ 42.034921] wlan: [917:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[ 42.044914] wlan: [917:I:ANY] htc_wmi_init: HT Create . 884e0000
[ 42.055122] wlan: [917:I:ANY] htc_wmi_init: Skipping BMI Done
[ 42.061017] wlan: [917:I:ANY] htc_wmi_init: host_enable 0
[ 42.075663] wlan: [917:I:ANY] ol_target_init_complete: CDP soc attach success
[ 42.075695] wlan: [917:I:ANY] ol_target_init_complete: Soc attach success NSS config 0
[ 42.083267] wlan: [917:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 884e0000, ep 2, value 1
[ 42.090703] wlan: [58:I:TIF] HE_CAP Info = 9a08010d
[ 42.098956] wlan: [58:I:TIF] Num HW modes = 1
[ 42.103583] wlan: [58:I:TIF] Num PHY = 1
[ 42.108068] wlan: [58:I:TIF] FW Build Version (Ext.) = 0
[ 42.112078] wlan: [58:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[ 42.117363] wlan: [58:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[ 42.124106] wlan: [58:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[ 42.130147] wlan: [58:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[ 42.144493] wlan: [58:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[ 42.152731] wlan: [58:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[ 42.159829] wlan: [58:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[ 42.166930] wlan: [58:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[ 42.174500] wlan: [58:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[ 42.182136] wlan: [58:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[ 42.189325] wlan: [58:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[ 42.196893] wlan: [58:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[ 42.204529] wlan: [58:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[ 42.211732] wlan: [58:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[ 42.219270] wlan: [58:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[ 42.226932] wlan: [58:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[ 42.234127] wlan: [58:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[ 42.241685] wlan: [58:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:89793000
[ 42.255646] wlan: [58:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9
[ 42.257905] wlan: [58:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[ 42.367492] wlan: [58:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[ 42.406656] wlan: [58:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[ 42.406690] wlan: [58:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 163, max_ast_index: 528
[ 42.406690]
[ 42.413971] wlan: [917:I:ANY] ol_ath_connect_htc: WMI is ready
[ 42.435899] wlan: [917:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[ 42.435937] wlan: [917:E:NSS] [nss-wifili]: pdev:87000480 radio_ifnum:28 scheme_id:1 radio_priority:0
[ 42.447831] wlan: [917:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[
U-Boot 2016.01 (Jul 15 2021 - 11:41:08 +0000), Build: jenkins-common_router_openwrt_ota_publish-1523
DRAM: smem ram ptable found: ver: 1 len: 4
256 MiB
USB: Node Not found, skipping initia▒*9▒ QPIC controller support serial NAND
ID = 41c841c8
Vendor = c8
Device = 41
Serial Nand Device Found With ID : 0xc8 0x41
Serial NAND device Manufacturer:GD5F1GQ5REYIG
Device Size:256 MiB, Page size:2048, Spare Size:128, ECC:8-bit
qpic_nand: changing oobsize to 80 from 128 bytes
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC: sdhci: Node Not found, skipping initialization
PCI0 is not defined in the device tree
PCI1 is not defined in the device tree
In: serial@78AF000
Out: serial@78AF000
Err: serial@78AF000
machid: 8040000
bootwait is off, bootdelay=5
### main_loop: bootcmd="bootmiwifi"
Hit any key to stop autoboot: 0
miwifi: check crash in rmem !
trigger button release!
boot from rootfs 1
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 36 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 288, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 231468073
ubi0: available PEBs: 75, total reserved PEBs: 213, PEBs reserved for bad PEB handling: 40
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (3555328)
## Loading kernel from FIT Image at 44000000 ...
Using 'config@mp02.1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-4.4.60
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x440000e4
Data Size: 2081285 Bytes = 2 MiB
Architecture: ARM
OS: Linux
Load Address: 0x41208000
Entry Point: 0x41208000
Hash algo: crc32
Hash value: 774d0663
Hash algo: sha1
Hash value: 59afe03c55b8bb7c99ff6a544b53be73c51cf6a9
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
Using 'config@mp02.1' configuration
Trying 'fdt@mp02.1' fdt subimage
Description: ARM OpenWrt qcom-ipq50xx-mpxx device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4429d538
Data Size: 61253 Bytes = 59.8 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 1b859d3f
Hash algo: sha1
Hash value: 9bf66d09bf14ec776740dae9e80309b59d0e6170
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4429d538
Uncompressing Kernel Image ... OK
Loading Device Tree to 4a3ee000, end 4a3fff44 ... OK
Could not find PCI in device tree
Could not find PCI in device tree
Using machid 0x8040000 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.60 (jenkins@007369db279c) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 unknown) ) #0 SMP PREEMPT Thu Jul 15 11:41:08 2021
[ 0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Qualcomm Technologies, Inc. IPQ5018/AP-MP02.1
[ 0.000000] Reserved memory: OVERLAP DETECTED!
[ 0.000000] q6_mem_regions@4B000000 (0x4b000000--0x4e400000) overlaps with q6_code_data@4B000000 (0x4b000000--0x4c400000)
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 10 pages/cpu @8fd7e000 s11724 r8192 d21044 u40960
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 47296
[ 0.000000] Kernel command line: ubi.mtd=rootfs_1 root=mtd:ubi_rootfs rootfstype=squashfs cnss2.bdf_integrated=0x24 cnss2.bdf_pci0=0x60 cnss2.bdf_pci1=0x60 cnss2.skip_radio_bmap=4 rootwait swiotlb=1
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 182684K/191488K available (3916K kernel code, 222K rwdata, 1712K rodata, 184K init, 463K bss, 8804K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x90800000 - 0xff800000 (1776 MB)
[ 0.000000] lowmem : 0x80000000 - 0x90000000 ( 256 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x81208000 - 0x817873fc (5629 kB)
[ 0.000000] .init : 0x81788000 - 0x817b6000 ( 184 kB)
[ 0.000000] .data : 0x817b6000 - 0x817ed96c ( 223 kB)
[ 0.000000] .bss : 0x817ed96c - 0x81861830 ( 464 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GICv2m: Node v2m: range[0xb00a000:0xb00affc], SPI[448:480]
[ 0.000000] GICv2m: Node v2m: range[0xb00b000:0xb00bffc], SPI[480:512]
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000017] Switching to timer-based delay loop, resolution 41ns
[ 0.000514] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000530] pid_max: default: 4096 minimum: 301
[ 0.000629] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000640] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001272] Initializing cgroup subsys io
[ 0.001297] Initializing cgroup subsys memory
[ 0.001327] Initializing cgroup subsys devices
[ 0.001341] Initializing cgroup subsys freezer
[ 0.001352] Initializing cgroup subsys net_cls
[ 0.001371] Initializing cgroup subsys pids
[ 0.001405] CPU: Testing write buffer coherency: ok
[ 0.001855] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001908] Setting up static identity map for 0x41208200 - 0x41208234
[ 0.051556] MSM Memory Dump base table set up
[ 0.051591] MSM Memory Dump apps data table set up
[ 0.080414] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.080510] Brought up 2 CPUs
[ 0.080527] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.080534] CPU: All CPU(s) started in SVC mode.
[ 0.096056] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4
[ 0.096271] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.096297] futex hash table entries: 16 (order: -2, 1024 bytes)
[ 0.096537] pinctrl core: initialized pinctrl subsystem
[ 0.097576] NET: Registered protocol family 16
[ 0.099054] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.099938] NET: Registered protocol family 42
[ 0.104763] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider
[ 0.108746] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[ 0.109943] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[ 0.120989] CPU: IPQ5000, SoC Version: 1.1
[ 0.130333] clocksource: Switched to clocksource arch_sys_counter
[ 0.132600] NET: Registered protocol family 2
[ 0.133505] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.133543] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.133585] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.133649] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.133666] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.133883] NET: Registered protocol family 1
[ 0.142276] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.142288] squashfs: patched 4.0 (2020/11/10) Oever Gonzalez
[ 0.142306] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.144072] io scheduler noop registered
[ 0.144092] io scheduler deadline registered (default)
[ 0.150958] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[ 0.151808] 58000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 154, base_baud = 0) is a EUD UART
[ 0.153190] Registered Sucessfully
[ 0.153771] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.153827] msm_serial 78af000.serial: uartclk = 1843199
[ 0.153882] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 20, base_baud = 115199) is a MSM
[ 0.153910] msm_serial: console setup on port #0
[ 0.727999] console [ttyMSM0] enabled
[ 0.733109] msm_serial: driver initialized
[ 0.736613] msm_serial_hsl_init: driver initialized
[ 0.741252] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 0.746510] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 0, 0
[ 0.753194] QPIC controller hw version Major:2, Minor:1
[ 0.758589] QPIC controller support serial nand.
[ 0.764041] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x41
[ 0.768576] nand: GigaDevice GD5F1GQ5REYIG SPI NAND 1G
[ 0.774942] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 0.780264] 22 ofpart partitions found on MTD device qcom_nand.0
[ 0.787442] Creating 22 MTD partitions on "qcom_nand.0":
[ 0.793681] 0x000000000000-0x000000080000 : "0:SBL1"
[ 0.800472] 0x000000080000-0x000000100000 : "0:MIBIB"
[ 0.805290] 0x000000100000-0x000000140000 : "0:BOOTCONFIG"
[ 0.810047] 0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
[ 0.815508] 0x000000180000-0x000000280000 : "0SEE"
[ 0.821430] 0x000000280000-0x000000380000 : "0SEE_1"
[ 0.826557] 0x000000380000-0x0000003c0000 : "0EVCFG"
[ 0.831034] 0x0000003c0000-0x000000400000 : "0EVCFG_1"
[ 0.836157] 0x000000400000-0x000000440000 : "0:CDT"
[ 0.841662] 0x000000440000-0x000000480000 : "0:CDT_1"
[ 0.846303] 0x000000480000-0x000000500000 : "0:APPSBLENV"
[ 0.851654] 0x000000500000-0x000000640000 : "0:APPSBL"
[ 0.857528] 0x000000640000-0x000000780000 : "0:APPSBL_1"
[ 0.862603] 0x000000780000-0x000000880000 : "0:ART"
[ 0.867870] 0x000000880000-0x000000900000 : "0:TRAINING"
[ 0.872180] 0x000000900000-0x000000980000 : "bdata"
[ 0.877642] 0x000000980000-0x000000a00000 : "crash"
[ 0.882270] 0x000000a00000-0x000000a80000 : "crash_syslog"
[ 0.887100] 0x000000a80000-0x000002e80000 : "rootfs"
[ 0.915650] mtd: device 18 (rootfs) set to be root filesystem
[ 0.915911] mtdsplit: no squashfs found in "rootfs"
[ 0.920424] 0x000002e80000-0x000005280000 : "rootfs_1"
[ 0.949336] 0x000005280000-0x000007180000 : "overlay"
[ 0.970711] 0x000007180000-0x000007200000 : "rsvd0"
[ 0.972702] libphy: Fixed MDIO Bus: probed
[ 1.190346] qca-mdio 88000.mdio: Could not find phy-reset-gpio
[ 1.190501] libphy: qca_mdio: probed
[ 1.210742] qca-mdio 88000.mdio: qca-mdio driver was registered
[ 1.650364] qca-mdio 90000.mdio: Could not find phy-reset-gpio
[ 1.650527] libphy: qca_mdio: probed
[ 1.656907] qca-mdio 90000.mdio: qca-mdio driver was registered
[ 1.760637] tun: Universal TUN/TAP device driver, 1.6
[ 1.760659] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.764745] cnss: INFO: IPC Logging is disabled!
[ 1.771369] cnss[2]: INFO: Platform driver probed successfully. plat 8f168010 tgt 0xfffc
[ 1.775863] cnss[41]: INFO: Platform driver probed successfully. plat 8f180010 tgt 0xfffb
[ 1.785227] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[ 1.793936]
[ 1.793936] Version Rollback Feature Disabled
[ 1.800716] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss
[ 1.803998] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available
[ 1.812666] q6v5_wcss_userpd1(8fda3194) node found
[ 1.820168] platform q6v5_wcss_userpd1: ssr registeration success q6v5_wcss_userpd1
[ 1.824170] remoteproc remoteproc1: q6v5_wcss_userpd1 is available
[ 1.831585] q6v5_wcss_userpd2(8fda3438) node found
[ 1.838786] platform q6v5_wcss_userpd2: ssr registeration success q6v5_wcss_userpd2
[ 1.842662] remoteproc remoteproc2: q6v5_wcss_userpd2 is available
[ 1.851281] Initializing XFRM netlink socket
[ 1.857149] NET: Registered protocol family 10
[ 1.880659] NET: Registered protocol family 17
[ 1.880754] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.884029] Bridge firewalling registered
[ 1.896856] 8021q: 802.1Q VLAN Support v1.8
[ 1.900963] Registering SWP/SWPB emulation handler
[ 1.922136] ubi0: attaching mtd19
[ 2.055278] ubi0: scanning is finished
[ 2.061089] ubi0: attached mtd19 (name "rootfs_1", size 36 MiB)
[ 2.061116] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.065807] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.072786] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.079608] ubi0: good PEBs: 288, bad PEBs: 0, corrupted PEBs: 0
[ 2.086395] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.092643] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 231468073
[ 2.099664] ubi0: available PEBs: 95, total reserved PEBs: 193, PEBs reserved for bad PEB handling: 20
[ 2.108643] ubi0: background thread "ubi_bgt0d" started, PID 68
[ 2.150909] hctosys: unable to open rtc device (rtc0)
[ 2.171666] crash_kernel_init, res rsvd1, 4e400000, 80000, /reserved-memory/rsvd1@4E400000
[ 2.171704] mtd dev crash, size 0x80000
[ 2.179558] crash_kernel_init, crash init, res->start:4e400000, crash_buf:0x94600000, crash_buf_len 0x7ffe4, crash_avail_sz 0x80000
[ 2.183196] Crash kernel dumper registered ok!
[ 2.195171] crash_syslog_init, res rsvd2, 4e480000, 80000, /reserved-memory/rsvd2@4E480000
[ 2.199832] mtd dev crash_syslog, size 0x80000
[ 2.208924] crash_syslog_init, crash init, crash_buf_len 0x3ffe4, crash_avail_sz 0x40000
[ 2.213066] Crash syslog dumper register ok!
[ 2.224991] VFS: Mounted root (squashfs filesystem) readonly on device 31:23.
[ 2.225988] Freeing unused kernel memory: 184K (81788000 - 817b6000)
[ 2.726928] init: Console is alive
[ 2.727170] init: - watchdog -
[ 2.974741] random: nonblocking pool is initialized
[ 4.041032] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.082449] Button Hotplug driver version 0.4.1
[ 4.095350] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.100703] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
跑码如上
|
|
/1 
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
发表于 2024-6-20 11:12
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡
